Kak Industry167514476
K-Spec M16 Bcg W/Side Vent 5.56X45Mm Nato Full Chrome$219.99
Availability: In Stock
Current Stock: Out of stock
The K-Spec M16 BCG with side vent from KAK Industry is a mil-spec enhanced bolt carrier group built for 5.56x45mm rifles that demand reliability without compromise. This is KAK's signature design—a full-auto profile carrier that keeps you running hard whether you're on the range, in competition, or relying on your rifle when it counts. The side vent design and dual ejector system work together to keep your action cycling cleanly, even in adverse conditions where carbon buildup and debris are a concern.
Built from 8620 steel and precision heat treated to exact tolerances, the carrier is paired with premium components throughout: a 4140 single-piece extractor, 8740 chrome-plated firing pin, S7 tool steel ejector and retaining pins, and a 4130 billet steel gas key that's chrome lined, chrome plated, and Permatex sealed. The phosphate coating adds another layer of corrosion resistance, especially useful if you're running suppressed or in wet conditions. Every fastener is Grade 8 with proper heat treat, and the gas key is precision staked to eliminate rocking.
If you're building or upgrading an AR platform rifle, this BCG gives you mil-spec dimensions—so it'll drop into any standard receiver—plus engineering refinements that KAK has refined over years of hard use. It's the kind of part that runs quietly in the background, doing its job shift after shift without asking for attention.
| Brand | KAK Industry |
| Product Type | Bolt Carrier Group (BCG) |
| Caliber | 5.56x45mm |
| Carrier Profile | M16 (Full-Auto) |
| Carrier Material | 8620 Steel |
| Extractor Material | 4140 Steel (Single-Piece Billet) |
| Firing Pin Material | 8740 Steel (Chrome-Plated) |
| Cam Pin Material | 4340 Steel (Chrome-Plated) |
| Gas Key Material | 4130 Steel (Billet, Chrome-Lined and Chrome-Plated) |
| Ejector/Retaining Pins | S7 Tool Steel |
| Finish | Phosphate, Chrome-Plated Components |
| Special Features | Slotted Angle Carrier Rails, Dual Ejector, Side Vent, Precision Staked Gas Key |
Yes. The K-Spec M16 BCG maintains mil-spec dimensions, so it will drop into any standard AR-15 receiver. The M16 carrier profile is also compatible with semi-auto and full-auto platforms.
The K-Spec M16 BCG comes complete with the carrier, bolt, firing pin, extractor, cam pin, ejector and retaining pins, gas key, and carrier key screws. It's ready to install once you receive it.
The side vent design on the carrier helps shed carbon, dirt, and debris during cycling, which keeps the action running cleaner and more reliably, especially in dirty or adverse environments.
The K-Spec is an enhanced mil-spec design. While it maintains mil-spec external dimensions, it includes features like slotted angle carrier rails, a dual ejector system, and premium materials throughout (8620 steel carrier, S7 tool steel ejector pins, Permatex-sealed gas key). The precision staking and heat treating on every component is also tighter than baseline mil-spec tolerances.
SKU: 167527883 • Weight: 0.82oz
Availability: In Stock
Current Stock: Out of stock
The K-Spec M16 BCG with side vent from KAK Industry is a mil-spec enhanced bolt carrier group built for 5.56x45mm rifles that demand reliability without compromise. This is KAK's signature design—a full-auto profile carrier that keeps you running hard whether you're on the range, in competition, or relying on your rifle when it counts. The side vent design and dual ejector system work together to keep your action cycling cleanly, even in adverse conditions where carbon buildup and debris are a concern.
Built from 8620 steel and precision heat treated to exact tolerances, the carrier is paired with premium components throughout: a 4140 single-piece extractor, 8740 chrome-plated firing pin, S7 tool steel ejector and retaining pins, and a 4130 billet steel gas key that's chrome lined, chrome plated, and Permatex sealed. The phosphate coating adds another layer of corrosion resistance, especially useful if you're running suppressed or in wet conditions. Every fastener is Grade 8 with proper heat treat, and the gas key is precision staked to eliminate rocking.
If you're building or upgrading an AR platform rifle, this BCG gives you mil-spec dimensions—so it'll drop into any standard receiver—plus engineering refinements that KAK has refined over years of hard use. It's the kind of part that runs quietly in the background, doing its job shift after shift without asking for attention.
| Brand | KAK Industry |
| Product Type | Bolt Carrier Group (BCG) |
| Caliber | 5.56x45mm |
| Carrier Profile | M16 (Full-Auto) |
| Carrier Material | 8620 Steel |
| Extractor Material | 4140 Steel (Single-Piece Billet) |
| Firing Pin Material | 8740 Steel (Chrome-Plated) |
| Cam Pin Material | 4340 Steel (Chrome-Plated) |
| Gas Key Material | 4130 Steel (Billet, Chrome-Lined and Chrome-Plated) |
| Ejector/Retaining Pins | S7 Tool Steel |
| Finish | Phosphate, Chrome-Plated Components |
| Special Features | Slotted Angle Carrier Rails, Dual Ejector, Side Vent, Precision Staked Gas Key |
Yes. The K-Spec M16 BCG maintains mil-spec dimensions, so it will drop into any standard AR-15 receiver. The M16 carrier profile is also compatible with semi-auto and full-auto platforms.
The K-Spec M16 BCG comes complete with the carrier, bolt, firing pin, extractor, cam pin, ejector and retaining pins, gas key, and carrier key screws. It's ready to install once you receive it.
The side vent design on the carrier helps shed carbon, dirt, and debris during cycling, which keeps the action running cleaner and more reliably, especially in dirty or adverse environments.
The K-Spec is an enhanced mil-spec design. While it maintains mil-spec external dimensions, it includes features like slotted angle carrier rails, a dual ejector system, and premium materials throughout (8620 steel carrier, S7 tool steel ejector pins, Permatex-sealed gas key). The precision staking and heat treating on every component is also tighter than baseline mil-spec tolerances.
SKU: 167527883 • Weight: 0.82oz