EGW197556204
Egw Savage A17 0 Moa$35.99
Availability: In Stock
The EGW Savage A17 scope base brings modern tactical mounting to your Savage A17 rimfire without the hassle of gunsmithing. This one-piece Picatinny rail mounts directly to your rifle's factory receiver holes—no drilling, no tapping, no trips to the gunsmith. If you're looking to upgrade from iron sights or swap optics quickly, a quality scope base is the foundation that makes everything else work right.
Built from 6061 T6 extruded aluminum, the EGW base is precision machined for rigidity and lightweight performance. The Picatinny slots are gauged to MIL-STD 1913 spec (±.002"), so any standard Picatinny or Weaver rings will lock down securely and repeatably. The milled center channel reduces weight without sacrificing strength—a smart detail for a rimfire platform where every ounce counts if you're hiking or hunting small game.
Installation is straightforward: the base arrives with socket head Torx screws and the wrench you need. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to keep everything locked in place. Whether you're mounting a red dot for quick target work, a variable scope for precision shooting, or planning future upgrades, this base gives you the flexibility to choose your rings and optics without constraint.
| Material | 6061 T6 extruded aluminum |
| Mount Type | Picatinny rail (one-piece) |
| Compatibility | Savage A17 |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Picatinny Spec | MIL-STD 1913 (±.002") |
| Recommended Torque | 20 inch-pounds |
| Fasteners Included | Socket head Torx screws, wrench |
Yes. The EGW base mounts directly to the factory scope mount holes on the Savage A17 receiver. No drilling or tapping required.
Any standard Picatinny or Weaver rings will fit. The Picatinny slots are machined to MIL-STD 1913 spec, ensuring secure, repeatable fit.
The base comes with socket head Torx screws and the wrench needed for installation. EGW also recommends using blue Loctite and torquing to 20 inch-pounds.
Absolutely. Because it accepts any Picatinny or Weaver rings, you can swap optics, adjust eye relief, and upgrade your setup independently without replacing the base.
SKU: 197556126 • Weight: 0.19oz
Availability: In Stock
The EGW Savage A17 scope base brings modern tactical mounting to your Savage A17 rimfire without the hassle of gunsmithing. This one-piece Picatinny rail mounts directly to your rifle's factory receiver holes—no drilling, no tapping, no trips to the gunsmith. If you're looking to upgrade from iron sights or swap optics quickly, a quality scope base is the foundation that makes everything else work right.
Built from 6061 T6 extruded aluminum, the EGW base is precision machined for rigidity and lightweight performance. The Picatinny slots are gauged to MIL-STD 1913 spec (±.002"), so any standard Picatinny or Weaver rings will lock down securely and repeatably. The milled center channel reduces weight without sacrificing strength—a smart detail for a rimfire platform where every ounce counts if you're hiking or hunting small game.
Installation is straightforward: the base arrives with socket head Torx screws and the wrench you need. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to keep everything locked in place. Whether you're mounting a red dot for quick target work, a variable scope for precision shooting, or planning future upgrades, this base gives you the flexibility to choose your rings and optics without constraint.
| Material | 6061 T6 extruded aluminum |
| Mount Type | Picatinny rail (one-piece) |
| Compatibility | Savage A17 |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Picatinny Spec | MIL-STD 1913 (±.002") |
| Recommended Torque | 20 inch-pounds |
| Fasteners Included | Socket head Torx screws, wrench |
Yes. The EGW base mounts directly to the factory scope mount holes on the Savage A17 receiver. No drilling or tapping required.
Any standard Picatinny or Weaver rings will fit. The Picatinny slots are machined to MIL-STD 1913 spec, ensuring secure, repeatable fit.
The base comes with socket head Torx screws and the wrench needed for installation. EGW also recommends using blue Loctite and torquing to 20 inch-pounds.
Absolutely. Because it accepts any Picatinny or Weaver rings, you can swap optics, adjust eye relief, and upgrade your setup independently without replacing the base.
SKU: 197556126 • Weight: 0.19oz