EGW197556335
Egw Savage 64 0 Moa$35.99
Loading...
Loading...
Loading...
Availability: In Stock
The EGW Savage 25 scope base brings modern Picatinny rail versatility to your Savage rifle without drilling or tapping the receiver. If you're running a Savage and want to swap scopes quickly, change eye relief on the fly, or simply have more optic options than factory scope mounts allow, this one-piece aluminum rail installs in minutes using the existing factory scope mount holes. It's the kind of upgrade that costs nothing in accuracy and everything in convenience.
Built from 6061 T6 extruded aluminum and precision machined to MIL-STD 1913 specs, the base accepts both Picatinny and Weaver rings, so you're not locked into any single ring manufacturer. The cross-slots are gauged to plus or minus .002 inches—tight tolerances that keep your optic stable and repeatable. EGW's lightweight tactical design includes a milled center channel that saves a few grams without compromising rigidity, a detail that matters if you're glassing for a long day or taking a rifle into the backcountry.
Installation is straightforward: the base drills to fit Savage's factory holes, and you get socket head Torx screws and the wrench to install them. EGW recommends 20 inch-pounds of torque and a drop of blue loctite—conservative assembly that keeps everything locked in place without over-tightening aluminum. Whether you're a precision rifle shooter looking to dial in the perfect scope height or a hunter who wants the flexibility to try different glass without permanent modifications, this base gives you that freedom.
| Brand | EGW |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Compatible Rings | Picatinny or Weaver |
| Slot Tolerance | ±.002" |
| Fit | Savage rifles with factory scope mount holes |
| Hardware Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds (with blue loctite) |
The EGW Savage 25 base is drilled to fit the factory scope mount holes on Savage receivers. Confirm your rifle has standard factory scope mount holes before ordering.
The Picatinny rail accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and the ability to swap rings without replacing the base.
No. The base uses the existing factory scope mount holes on your Savage rifle, so no drilling or tapping of the receiver is required.
The base comes with socket head Torx screws, a Torx wrench for installation, and EGW's recommendation to use 20 inch-pounds of torque with blue loctite during assembly.
SKU: 197556269 • Weight: 0.21oz
Availability: In Stock
The EGW Savage 25 scope base brings modern Picatinny rail versatility to your Savage rifle without drilling or tapping the receiver. If you're running a Savage and want to swap scopes quickly, change eye relief on the fly, or simply have more optic options than factory scope mounts allow, this one-piece aluminum rail installs in minutes using the existing factory scope mount holes. It's the kind of upgrade that costs nothing in accuracy and everything in convenience.
Built from 6061 T6 extruded aluminum and precision machined to MIL-STD 1913 specs, the base accepts both Picatinny and Weaver rings, so you're not locked into any single ring manufacturer. The cross-slots are gauged to plus or minus .002 inches—tight tolerances that keep your optic stable and repeatable. EGW's lightweight tactical design includes a milled center channel that saves a few grams without compromising rigidity, a detail that matters if you're glassing for a long day or taking a rifle into the backcountry.
Installation is straightforward: the base drills to fit Savage's factory holes, and you get socket head Torx screws and the wrench to install them. EGW recommends 20 inch-pounds of torque and a drop of blue loctite—conservative assembly that keeps everything locked in place without over-tightening aluminum. Whether you're a precision rifle shooter looking to dial in the perfect scope height or a hunter who wants the flexibility to try different glass without permanent modifications, this base gives you that freedom.
| Brand | EGW |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Compatible Rings | Picatinny or Weaver |
| Slot Tolerance | ±.002" |
| Fit | Savage rifles with factory scope mount holes |
| Hardware Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds (with blue loctite) |
The EGW Savage 25 base is drilled to fit the factory scope mount holes on Savage receivers. Confirm your rifle has standard factory scope mount holes before ordering.
The Picatinny rail accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and the ability to swap rings without replacing the base.
No. The base uses the existing factory scope mount holes on your Savage rifle, so no drilling or tapping of the receiver is required.
The base comes with socket head Torx screws, a Torx wrench for installation, and EGW's recommendation to use 20 inch-pounds of torque with blue loctite during assembly.
SKU: 197556269 • Weight: 0.21oz