EGW197556071
Egw Savage 212 0 Moa$35.99
Availability: In Stock
Current Stock: Out of stock
The EGW Savage 210 scope base transforms your shotgun's mounting system into a modern Picatinny rail setup without any gunsmithing. Built for Savage 210 receivers, this one-piece aluminum mount uses your factory scope holes—no drilling, no tapping required. If you're upgrading from iron sights or swapping optics frequently, a quality Picatinny base gives you the flexibility to dial in eye relief and choose from a vastly wider range of modern scope rings than legacy mounts allow.
Precision machining is the foundation here. EGW machines these bases from extruded 6061 T6 aluminum and gauges the Picatinny slots to MIL-STD 1913 specification (±.002"), so Weaver and Picatinny rings fit consistently and securely. The full-width cross-slots accept standard Picatinny and Weaver rings, giving you genuine choice when you're ready to mount glass. Socket head Torx screws and a wrench are included in the box, along with EGW's recommendation to torque to 20 inch-pounds and apply a drop of blue Loctite—a straightforward installation that takes minutes.
Weight matters on a shotgun, and EGW's Tactical profile includes a milled center channel that shaves ounces without sacrificing rigidity. The result is a lightweight, rock-solid base that won't flex under recoil or affect your gun's handling in the field or at the range.
| Material | Extruded 6061 T6 aluminum |
| Picatinny Slot Tolerance | ±.002" (MIL-STD 1913) |
| Compatible Rings | Picatinny and Weaver |
| Firearm Fit | Savage 210 receiver factory mount holes |
| Fasteners Included | Socket head Torx screws with wrench |
| Recommended Torque | 20 inch-pounds |
| Locking Compound | Blue Loctite recommended |
Yes. This base is drilled specifically for the factory scope mount holes on Savage 210 receivers. No gunsmithing is needed—it bolts right on using your existing holes.
Both Picatinny and Weaver rings are compatible. Standard Weaver rings will fit Picatinny rails, so you have a wide selection of modern rings to choose from.
The mount comes with socket head Torx screws, a Torx wrench, and everything you need to install it. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
Yes. The Tactical profile includes a milled center channel that reduces weight while maintaining rigidity, so you're not adding unnecessary bulk to your gun.
SKU: 197556053 • Weight: 0.26oz
Availability: In Stock
Current Stock: Out of stock
The EGW Savage 210 scope base transforms your shotgun's mounting system into a modern Picatinny rail setup without any gunsmithing. Built for Savage 210 receivers, this one-piece aluminum mount uses your factory scope holes—no drilling, no tapping required. If you're upgrading from iron sights or swapping optics frequently, a quality Picatinny base gives you the flexibility to dial in eye relief and choose from a vastly wider range of modern scope rings than legacy mounts allow.
Precision machining is the foundation here. EGW machines these bases from extruded 6061 T6 aluminum and gauges the Picatinny slots to MIL-STD 1913 specification (±.002"), so Weaver and Picatinny rings fit consistently and securely. The full-width cross-slots accept standard Picatinny and Weaver rings, giving you genuine choice when you're ready to mount glass. Socket head Torx screws and a wrench are included in the box, along with EGW's recommendation to torque to 20 inch-pounds and apply a drop of blue Loctite—a straightforward installation that takes minutes.
Weight matters on a shotgun, and EGW's Tactical profile includes a milled center channel that shaves ounces without sacrificing rigidity. The result is a lightweight, rock-solid base that won't flex under recoil or affect your gun's handling in the field or at the range.
| Material | Extruded 6061 T6 aluminum |
| Picatinny Slot Tolerance | ±.002" (MIL-STD 1913) |
| Compatible Rings | Picatinny and Weaver |
| Firearm Fit | Savage 210 receiver factory mount holes |
| Fasteners Included | Socket head Torx screws with wrench |
| Recommended Torque | 20 inch-pounds |
| Locking Compound | Blue Loctite recommended |
Yes. This base is drilled specifically for the factory scope mount holes on Savage 210 receivers. No gunsmithing is needed—it bolts right on using your existing holes.
Both Picatinny and Weaver rings are compatible. Standard Weaver rings will fit Picatinny rails, so you have a wide selection of modern rings to choose from.
The mount comes with socket head Torx screws, a Torx wrench, and everything you need to install it. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
Yes. The Tactical profile includes a milled center channel that reduces weight while maintaining rigidity, so you're not adding unnecessary bulk to your gun.
SKU: 197556053 • Weight: 0.26oz