Breek Arms194201874
Breek Arms BRK6015MGRAY Sledgehammer Charging Handle Mil Spec AR15/M16 Rifles Gray Aluminum$69.99
Availability: In Stock
The Breek Arms Sledgehammer charging handle is a mil spec AR15/M16 upgrade built to handle hard use and punish gas blowback. If you're running suppressed, shooting indoors, or just tired of catching gas in the face, this OD green aluminum charging handle tackles the problem with engineering that goes beyond a basic bolt carrier grab. Machined from 7075-T6 aerospace-grade aluminum and hard-coat anodized for durability, the Sledgehammer combines wide, serrated latches for positive manipulation with internal gas-management features that actually work.
The gas-busting design is the real story here. A raised rear shelf blocks gas before it exits the upper receiver; internal baffling inside the stem creates turbulence to slow expansion; and strategically positioned relief cuts on top and bottom redirect pressure away from your face instead of funneling it straight at you. It's the kind of thought that separates a tool from a genuine solution. Drop-in installation on any mil spec upper—no gunsmithing, no fuss.
Built in the USA, weighing just 1.1 ounces, and finished in OD green anodize, the Sledgehammer works equally well for precision rifle work, duty use, or any serious shooter tired of fighting their rifle's breathing habit.
| Material | 7075-T6 aluminum (stem and latches) |
| Finish | Type III hard-coat anodized, OD green |
| Weight | 1.1 oz |
| Latch Width | 2.59" |
| Compatibility | Mil spec AR15/M16 rifles |
| Installation | No gunsmithing required |
Yes. The Sledgehammer is designed for all mil spec AR15 and M16 rifles and requires no modifications to install—it's a drop-in upgrade.
The gas-busting features—a raised rear shelf, internal baffling, and ported relief cuts—work together to slow and redirect excess gas pressure that normally vents straight into your face, especially noticeable when shooting suppressed or in enclosed spaces.
Yes. The Sledgehammer is manufactured in the United States.
The Sledgehammer weighs 1.1 ounces and is finished in OD green Type III hard-coat anodize over 7075-T6 aluminum, providing durability and a professional appearance.
SKU: 194201857 • Width: 3.7in • Height: 0.7in • Depth: 8.7in • Weight: 0.105oz
Availability: In Stock
The Breek Arms Sledgehammer charging handle is a mil spec AR15/M16 upgrade built to handle hard use and punish gas blowback. If you're running suppressed, shooting indoors, or just tired of catching gas in the face, this OD green aluminum charging handle tackles the problem with engineering that goes beyond a basic bolt carrier grab. Machined from 7075-T6 aerospace-grade aluminum and hard-coat anodized for durability, the Sledgehammer combines wide, serrated latches for positive manipulation with internal gas-management features that actually work.
The gas-busting design is the real story here. A raised rear shelf blocks gas before it exits the upper receiver; internal baffling inside the stem creates turbulence to slow expansion; and strategically positioned relief cuts on top and bottom redirect pressure away from your face instead of funneling it straight at you. It's the kind of thought that separates a tool from a genuine solution. Drop-in installation on any mil spec upper—no gunsmithing, no fuss.
Built in the USA, weighing just 1.1 ounces, and finished in OD green anodize, the Sledgehammer works equally well for precision rifle work, duty use, or any serious shooter tired of fighting their rifle's breathing habit.
| Material | 7075-T6 aluminum (stem and latches) |
| Finish | Type III hard-coat anodized, OD green |
| Weight | 1.1 oz |
| Latch Width | 2.59" |
| Compatibility | Mil spec AR15/M16 rifles |
| Installation | No gunsmithing required |
Yes. The Sledgehammer is designed for all mil spec AR15 and M16 rifles and requires no modifications to install—it's a drop-in upgrade.
The gas-busting features—a raised rear shelf, internal baffling, and ported relief cuts—work together to slow and redirect excess gas pressure that normally vents straight into your face, especially noticeable when shooting suppressed or in enclosed spaces.
Yes. The Sledgehammer is manufactured in the United States.
The Sledgehammer weighs 1.1 ounces and is finished in OD green Type III hard-coat anodize over 7075-T6 aluminum, providing durability and a professional appearance.
SKU: 194201857 • Width: 3.7in • Height: 0.7in • Depth: 8.7in • Weight: 0.105oz