Breek Arms194201857
Breek Arms BRK6015RGREEN Sledgehammer Charging Handle Mil Spec AR15/M16 Rifles OD Green Aluminum$69.99
Availability: In Stock
The Breek Arms Sledgehammer charging handle for mil spec AR15/M16 rifles brings purpose-built engineering to one of the most-used controls on your rifle. Built from aerospace-grade 7075-T6 aluminum and finished in gray hard-coat anodize, this charging handle is designed for shooters who run suppressed setups or shoot frequently indoors where gas blowback becomes a real quality-of-life issue. The Sledgehammer's defining feature is its gas-mitigation geometry: a raised shelf at the rear of the upper receiver, internal baffling in the stem to slow gas expansion, and ported relief cuts that redirect excess pressure away from your face rather than straight into it.
\The latches are wide and deeply serrated—wide enough (2.59 inches) to grab confidently even with gloved hands or in poor light, serrated enough to lock in securely without fumbling. At just 1.1 ounces, it adds negligible weight while delivering the kind of durability you expect from a precision aluminum part. Installation requires no gunsmithing; it drops into any mil spec upper as a direct swap. This is the kind of upgrade that doesn't change how your rifle looks but noticeably changes how it feels to shoot, especially if you've spent time coughing through gas leakage with a standard charging handle.
\Made in America and engineered by people who actually shoot suppressed and short-barreled ARs, the Sledgehammer solves a problem that shouldn't exist but does on most production rifles. If you run a can or spend time at the indoor range, this handle earns its place on your gun.
\| Material (Stem) | \7075-T6 aluminum | \
| Material (Latches) | \7075-T6 aluminum | \
| Finish | \Type III hard-coat anodized | \
| Color | \Gray | \
| Latch Width | \2.59 inches | \
| Weight | \1.1 ounces | \
| Compatibility | \Mil spec AR15/M16 rifles | \
| Installation | \No gunsmithing required | \
| Manufactured | \USA | \
Yes, if your rifle uses a mil spec upper receiver. The Sledgehammer is a direct drop-in replacement for any mil spec AR15 or M16—no gunsmithing or modifications needed.
\The Sledgehammer is specifically engineered to mitigate gas in your face. Its design includes a raised shelf at the rear of the upper, internal baffling in the stem to slow gas expansion, and ported relief cuts that redirect pressure away from the shooter rather than toward it. You'll notice the difference especially when running a suppressor or shooting indoors.
\You receive the Sledgehammer charging handle itself. It installs directly into your upper receiver in place of your existing charging handle.
\The Sledgehammer weighs 1.1 ounces, so it adds virtually nothing to your rifle's overall weight or handling balance.
SKU: 194201874 • Width: 3.7in • Height: 0.7in • Depth: 8.7in • Weight: 0.11oz
Availability: In Stock
The Breek Arms Sledgehammer charging handle for mil spec AR15/M16 rifles brings purpose-built engineering to one of the most-used controls on your rifle. Built from aerospace-grade 7075-T6 aluminum and finished in gray hard-coat anodize, this charging handle is designed for shooters who run suppressed setups or shoot frequently indoors where gas blowback becomes a real quality-of-life issue. The Sledgehammer's defining feature is its gas-mitigation geometry: a raised shelf at the rear of the upper receiver, internal baffling in the stem to slow gas expansion, and ported relief cuts that redirect excess pressure away from your face rather than straight into it.
\The latches are wide and deeply serrated—wide enough (2.59 inches) to grab confidently even with gloved hands or in poor light, serrated enough to lock in securely without fumbling. At just 1.1 ounces, it adds negligible weight while delivering the kind of durability you expect from a precision aluminum part. Installation requires no gunsmithing; it drops into any mil spec upper as a direct swap. This is the kind of upgrade that doesn't change how your rifle looks but noticeably changes how it feels to shoot, especially if you've spent time coughing through gas leakage with a standard charging handle.
\Made in America and engineered by people who actually shoot suppressed and short-barreled ARs, the Sledgehammer solves a problem that shouldn't exist but does on most production rifles. If you run a can or spend time at the indoor range, this handle earns its place on your gun.
\| Material (Stem) | \7075-T6 aluminum | \
| Material (Latches) | \7075-T6 aluminum | \
| Finish | \Type III hard-coat anodized | \
| Color | \Gray | \
| Latch Width | \2.59 inches | \
| Weight | \1.1 ounces | \
| Compatibility | \Mil spec AR15/M16 rifles | \
| Installation | \No gunsmithing required | \
| Manufactured | \USA | \
Yes, if your rifle uses a mil spec upper receiver. The Sledgehammer is a direct drop-in replacement for any mil spec AR15 or M16—no gunsmithing or modifications needed.
\The Sledgehammer is specifically engineered to mitigate gas in your face. Its design includes a raised shelf at the rear of the upper, internal baffling in the stem to slow gas expansion, and ported relief cuts that redirect pressure away from the shooter rather than toward it. You'll notice the difference especially when running a suppressor or shooting indoors.
\You receive the Sledgehammer charging handle itself. It installs directly into your upper receiver in place of your existing charging handle.
\The Sledgehammer weighs 1.1 ounces, so it adds virtually nothing to your rifle's overall weight or handling balance.
SKU: 194201874 • Width: 3.7in • Height: 0.7in • Depth: 8.7in • Weight: 0.11oz