AeroPrecision167528792
Atlas R-One 12.7'' Handguard Mlok Free Float For Ar15 Kodiak$194.99
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Aero Precision Atlas S-One 12.7'' handguard M-LOK is built for shooters who demand a lightweight free-float rail without sacrificing durability or modularity. Machined from 6061-T6 aluminum, this mid-length handguard strips away unnecessary material to keep your AR15 trim and responsive while maintaining the strength Aero Precision is known for. The 12.7-inch length strikes a practical balance between sight radius and controls access, making it equally at home on a hunting rifle, competition build, or precision shooter's platform.
What sets the S-One apart is Aero's proprietary ATLAS (Aero Taper Lock Attachment System) mounting platform. Instead of the uneven pressure that can warp lesser handguards during installation, ATLAS uses two mirrored tapered locking nuts and a custom-engineered barrel nut to distribute clamping force evenly across the rail. A ratcheting detent locks everything in positive registration, and all hardware comes included—no hunting for barrel nuts or screws. The system keeps the profile slim and clean while delivering the rigidity serious shooters expect.
The 12.7'' S-One weighs just 7 ounces (plus 1.9 oz for mounting hardware), so it won't burden your rifle when every ounce counts. It features front and rear picatinny rail sections, indexing grooves at 12 o'clock for a sure grip, and quick-disconnect sling attachment points at 3, 6, and 9 o'clock. The eliminated center top rail further reduces weight without compromising functionality. Compatible with mil-spec AR15 uppers and low-profile gas blocks, it's a direct fit for most standard builds—just verify your upper receiver isn't an M4E1 Enhanced model, which uses a different indexing system.
| Brand | Aero Precision |
| Model | Atlas S-One |
| Length | 12.7'' |
| Mounting System | M-LOK / ATLAS |
| Material | 6061-T6 Aluminum |
| Weight (Handguard) | 7.00 oz |
| Weight (Mounting Hardware) | 1.9 oz |
| Inside Diameter | 1.3'' |
| Outside Diameter | 1.5'' |
| Compatible Upper Receivers | Mil-Spec AR15, M4E1 Threaded Upper |
| Not Compatible With | M4E1 Enhanced Upper Receiver |
| Gas Block Compatibility | Low-profile |
The Atlas S-One is compatible with mil-spec AR15 upper receivers and Aero's M4E1 Threaded Upper. It is not compatible with the M4E1 Enhanced Upper Receiver due to indexing tab differences. Check your upper receiver type before ordering to ensure fit.
All mounting hardware for the ATLAS system is included with your handguard—barrel nut, tapered locking nuts, turnbuckle screw, and detent. You won't need to source additional parts to install it.
Yes. The ATLAS mounting system clamps the handguard to the barrel nut, leaving the barrel free-floating and isolated from the handguard itself. This supports consistent accuracy by eliminating contact between the barrel and rail that can affect point of impact.
Yes, the S-One is designed to work with low-profile gas blocks. Its 1.3'' inside diameter provides adequate clearance for low-profile setups.
SKU: 167527934 • Weight: 2oz
Availability: In Stock
Current Stock: Out of stock
The Aero Precision Atlas S-One 12.7'' handguard M-LOK is built for shooters who demand a lightweight free-float rail without sacrificing durability or modularity. Machined from 6061-T6 aluminum, this mid-length handguard strips away unnecessary material to keep your AR15 trim and responsive while maintaining the strength Aero Precision is known for. The 12.7-inch length strikes a practical balance between sight radius and controls access, making it equally at home on a hunting rifle, competition build, or precision shooter's platform.
What sets the S-One apart is Aero's proprietary ATLAS (Aero Taper Lock Attachment System) mounting platform. Instead of the uneven pressure that can warp lesser handguards during installation, ATLAS uses two mirrored tapered locking nuts and a custom-engineered barrel nut to distribute clamping force evenly across the rail. A ratcheting detent locks everything in positive registration, and all hardware comes included—no hunting for barrel nuts or screws. The system keeps the profile slim and clean while delivering the rigidity serious shooters expect.
The 12.7'' S-One weighs just 7 ounces (plus 1.9 oz for mounting hardware), so it won't burden your rifle when every ounce counts. It features front and rear picatinny rail sections, indexing grooves at 12 o'clock for a sure grip, and quick-disconnect sling attachment points at 3, 6, and 9 o'clock. The eliminated center top rail further reduces weight without compromising functionality. Compatible with mil-spec AR15 uppers and low-profile gas blocks, it's a direct fit for most standard builds—just verify your upper receiver isn't an M4E1 Enhanced model, which uses a different indexing system.
| Brand | Aero Precision |
| Model | Atlas S-One |
| Length | 12.7'' |
| Mounting System | M-LOK / ATLAS |
| Material | 6061-T6 Aluminum |
| Weight (Handguard) | 7.00 oz |
| Weight (Mounting Hardware) | 1.9 oz |
| Inside Diameter | 1.3'' |
| Outside Diameter | 1.5'' |
| Compatible Upper Receivers | Mil-Spec AR15, M4E1 Threaded Upper |
| Not Compatible With | M4E1 Enhanced Upper Receiver |
| Gas Block Compatibility | Low-profile |
The Atlas S-One is compatible with mil-spec AR15 upper receivers and Aero's M4E1 Threaded Upper. It is not compatible with the M4E1 Enhanced Upper Receiver due to indexing tab differences. Check your upper receiver type before ordering to ensure fit.
All mounting hardware for the ATLAS system is included with your handguard—barrel nut, tapered locking nuts, turnbuckle screw, and detent. You won't need to source additional parts to install it.
Yes. The ATLAS mounting system clamps the handguard to the barrel nut, leaving the barrel free-floating and isolated from the handguard itself. This supports consistent accuracy by eliminating contact between the barrel and rail that can affect point of impact.
Yes, the S-One is designed to work with low-profile gas blocks. Its 1.3'' inside diameter provides adequate clearance for low-profile setups.
SKU: 167527934 • Weight: 2oz