Area 419167525045
Area 419 Zero M-Series Sizing Dies 6 Cm W/ Shell Holder$500.00
Availability: In Stock
The Area 419 Zero M-Series Sizing Die for 6 BR is a precision reloading die built from the ground up to work seamlessly with the ZERO press ecosystem. Unlike generic sizing dies, this is a 1-1/4" die engineered specifically for shooters who demand match-grade ammunition without the guesswork. Area 419 designed it after years of real-world testing and feedback from reloaders—understanding that a sizing die doesn't exist in isolation but as part of a system that includes your press, brass, and rifle. The result is a die that simplifies the sizing process while delivering the precision needed for competitive and long-range shooting.
What sets the M-Series apart is its micrometer-adjustable headspace control and hydraulic shoulder pressure relief. You get true, repeatable sizing—no more sticky bolts after the second firing, no complicated trial-and-error setup. The die ships with a precision ground expander mandrel set to .002" neck tension (standard for most applications), and you can add additional mandrel increments separately if your loads demand it. Full-length neck-to-extractor sizing keeps neck tension consistent across your brass, while spring ejection and a replaceable steel decap pin handle the hard work of processing fired primers.
Important: this die requires a ZERO M-Series or Hybrid turret (1-1/4" only)—it will not fit standard 7/8" turrets or presses. It also demands a larger-diameter ZERO M-Series shellholder; standard shellholders won't work. The package includes the die, shellholder, a die ring, a spare decapping pin, and installation tools. Everything is manufactured in the USA and built to the kind of tight tolerances that separate good ammo from great ammo.
| Caliber | 6 BR |
| Die Type | Full-Length Sizing Die (M-Series) |
| Turret Compatibility | 1-1/4" ZERO Hybrid or ZERO M-Series turret only; NOT compatible with 7/8" turrets |
| Shellholder Required | ZERO M-Series shellholder (larger diameter—standard shellholders incompatible) |
| Neck Tension (Standard) | .002" (adjustable; additional mandrels available separately) |
| Included Accessories | Shellholder, ZERO Die Ring, spare decapping pin, installation/removal tools |
| Country of Origin | USA |
Not unless you have a ZERO press with a 1-1/4" Hybrid or M-Series turret and a ZERO M-Series shellholder. This die is not compatible with standard 7/8" turrets, 7/8" presses, or standard shellholders. The M-Series shellholder has a larger diameter rim than conventional shellholders. Verify your press turret size and shellholder before ordering.
The package includes the 6 BR sizing die, the ZERO M-Series shellholder, an Area 419 ZERO Die Ring, a spare decapping pin, and the necessary installation and removal tools.
Yes. The die ships with a precision ground expander mandrel set to .002" neck tension, which works for most reloading applications. Area 419 offers a separate Mandrel Kit if you need different neck tension increments for specialized loads.
The micrometer-adjustable headspace control, hydraulic shoulder pressure relief, and precision reamer cut ensure true, repeatable sizing without the sticky bolt issues that plague poorly sized brass. These features work together with the ZERO press design to eliminate the guesswork and produce consistent, high-precision ammunition suitable for competition and long-range shooting.
SKU: 167525053 • Width: 6in • Height: 3in • Depth: 10in • Weight: 3.33oz
Availability: In Stock
The Area 419 Zero M-Series Sizing Die for 6 BR is a precision reloading die built from the ground up to work seamlessly with the ZERO press ecosystem. Unlike generic sizing dies, this is a 1-1/4" die engineered specifically for shooters who demand match-grade ammunition without the guesswork. Area 419 designed it after years of real-world testing and feedback from reloaders—understanding that a sizing die doesn't exist in isolation but as part of a system that includes your press, brass, and rifle. The result is a die that simplifies the sizing process while delivering the precision needed for competitive and long-range shooting.
What sets the M-Series apart is its micrometer-adjustable headspace control and hydraulic shoulder pressure relief. You get true, repeatable sizing—no more sticky bolts after the second firing, no complicated trial-and-error setup. The die ships with a precision ground expander mandrel set to .002" neck tension (standard for most applications), and you can add additional mandrel increments separately if your loads demand it. Full-length neck-to-extractor sizing keeps neck tension consistent across your brass, while spring ejection and a replaceable steel decap pin handle the hard work of processing fired primers.
Important: this die requires a ZERO M-Series or Hybrid turret (1-1/4" only)—it will not fit standard 7/8" turrets or presses. It also demands a larger-diameter ZERO M-Series shellholder; standard shellholders won't work. The package includes the die, shellholder, a die ring, a spare decapping pin, and installation tools. Everything is manufactured in the USA and built to the kind of tight tolerances that separate good ammo from great ammo.
| Caliber | 6 BR |
| Die Type | Full-Length Sizing Die (M-Series) |
| Turret Compatibility | 1-1/4" ZERO Hybrid or ZERO M-Series turret only; NOT compatible with 7/8" turrets |
| Shellholder Required | ZERO M-Series shellholder (larger diameter—standard shellholders incompatible) |
| Neck Tension (Standard) | .002" (adjustable; additional mandrels available separately) |
| Included Accessories | Shellholder, ZERO Die Ring, spare decapping pin, installation/removal tools |
| Country of Origin | USA |
Not unless you have a ZERO press with a 1-1/4" Hybrid or M-Series turret and a ZERO M-Series shellholder. This die is not compatible with standard 7/8" turrets, 7/8" presses, or standard shellholders. The M-Series shellholder has a larger diameter rim than conventional shellholders. Verify your press turret size and shellholder before ordering.
The package includes the 6 BR sizing die, the ZERO M-Series shellholder, an Area 419 ZERO Die Ring, a spare decapping pin, and the necessary installation and removal tools.
Yes. The die ships with a precision ground expander mandrel set to .002" neck tension, which works for most reloading applications. Area 419 offers a separate Mandrel Kit if you need different neck tension increments for specialized loads.
The micrometer-adjustable headspace control, hydraulic shoulder pressure relief, and precision reamer cut ensure true, repeatable sizing without the sticky bolt issues that plague poorly sized brass. These features work together with the ZERO press design to eliminate the guesswork and produce consistent, high-precision ammunition suitable for competition and long-range shooting.
SKU: 167525053 • Width: 6in • Height: 3in • Depth: 10in • Weight: 3.33oz