APEX TACTICAL SPECIALTIES194195797
Apex Tactical Specialties M&P 2.0 Flat Faced Forward Trigger Kit Polymer Fde$104.50
Availability: In Stock
The Apex Tactical Specialties Forward Set Flat Face Trigger Kit for M&P 2.0 (Red) is a competition-grade trigger upgrade designed to give M&P 2.0 shooters a cleaner, faster trigger reset and measurably shorter takeup. This kit addresses the common frustrations with factory M&P triggers: excessive pre-travel, dead zones on reset, and a long, mushy break. If you shoot matches, run drills at the range, or simply want your duty or carry gun to perform like it should, a quality aftermarket trigger is one of the highest-impact upgrades you can make.
The kit centers on a patent-pending sear actuator that shortens the overall trigger stroke by dropping the striker earlier in the pull cycle compared to the factory design. That alone cuts wasted motion and speeds up follow-up shots. The forward-set trigger bar itself increases reach to the trigger face, letting shooters with longer fingers seat their trigger finger lower for better leverage and more control. The flat face gives consistent contact and eliminates the curved factory design that can cause bind or catch on calluses during rapid fire.
An improved striker block kit with a refined radius on the striking surface smooths out the entire pull and kills most of the false reset problems shooters experience with stock M&P triggers. The full spring kit supplied here is tuned to deliver a 4 to 5 pound pull weight, with final results typically landing between 4 and 6 pounds depending on your specific gun's return spring and sear spring pairing. You'll notice shorter pre-travel, cleaner break, and a snappier reset—exactly what matters when you're training or competing.
Installation requires gunsmith-level knowledge and tools; this is not a field-strip job. The center-mounted pivoting safety retains the stock M&P 2.0 safety geometry, so you lose nothing in terms of ergonomics or reliability. Red anodizing on the trigger bar is a nice touch that makes the upgrade visible when the slide is locked back.
| Product Name | Forward Set Flat Face Trigger Kit for M&P 2.0 (Red) |
| Model Number | 100153 |
| Brand | Apex Tactical Specialties |
| Firearm Compatibility | Smith & Wesson M&P 2.0 |
| Trigger Pull Weight | 4–6 lbs (dependent on gun's return spring and sear spring) |
| Trigger Face Style | Flat |
| Trigger Bar Color | Red anodized |
| Kit Contents | Forward-set trigger bar, patent-pending sear actuator, striker block kit, full spring kit |
Yes. The Apex Forward Set Flat Face Trigger Kit is designed specifically for the M&P 2.0 platform and maintains compatibility with the factory center-mounted safety and M&P 2.0 frame geometry.
The full spring kit supplied here is tuned to deliver between 4 and 5 pounds, though your final result may fall anywhere in the 4–6 pound range depending on your gun's individual return spring and sear spring. This is typical variation in mechanical triggers and not a defect.
The kit contains the forward-set trigger bar, sear actuator, striker block kit, and spring kit. Installation requires gunsmith tools and knowledge; this is not a simple field-strip procedure and should be performed by someone with trigger work experience or by a qualified gunsmith.
The forward-set design, reduced pre-travel, and smoother break are ideal for competitive shooting and training. Many shooters also carry M&P 2.0s with Apex upgrades, though any carry trigger choice is a personal decision based on your training and comfort level.
SKU: 121689086 • Width: 3.6in • Height: 0.9in • Depth: 3.8in • Weight: 0.07oz
Availability: In Stock
The Apex Tactical Specialties Forward Set Flat Face Trigger Kit for M&P 2.0 (Red) is a competition-grade trigger upgrade designed to give M&P 2.0 shooters a cleaner, faster trigger reset and measurably shorter takeup. This kit addresses the common frustrations with factory M&P triggers: excessive pre-travel, dead zones on reset, and a long, mushy break. If you shoot matches, run drills at the range, or simply want your duty or carry gun to perform like it should, a quality aftermarket trigger is one of the highest-impact upgrades you can make.
The kit centers on a patent-pending sear actuator that shortens the overall trigger stroke by dropping the striker earlier in the pull cycle compared to the factory design. That alone cuts wasted motion and speeds up follow-up shots. The forward-set trigger bar itself increases reach to the trigger face, letting shooters with longer fingers seat their trigger finger lower for better leverage and more control. The flat face gives consistent contact and eliminates the curved factory design that can cause bind or catch on calluses during rapid fire.
An improved striker block kit with a refined radius on the striking surface smooths out the entire pull and kills most of the false reset problems shooters experience with stock M&P triggers. The full spring kit supplied here is tuned to deliver a 4 to 5 pound pull weight, with final results typically landing between 4 and 6 pounds depending on your specific gun's return spring and sear spring pairing. You'll notice shorter pre-travel, cleaner break, and a snappier reset—exactly what matters when you're training or competing.
Installation requires gunsmith-level knowledge and tools; this is not a field-strip job. The center-mounted pivoting safety retains the stock M&P 2.0 safety geometry, so you lose nothing in terms of ergonomics or reliability. Red anodizing on the trigger bar is a nice touch that makes the upgrade visible when the slide is locked back.
| Product Name | Forward Set Flat Face Trigger Kit for M&P 2.0 (Red) |
| Model Number | 100153 |
| Brand | Apex Tactical Specialties |
| Firearm Compatibility | Smith & Wesson M&P 2.0 |
| Trigger Pull Weight | 4–6 lbs (dependent on gun's return spring and sear spring) |
| Trigger Face Style | Flat |
| Trigger Bar Color | Red anodized |
| Kit Contents | Forward-set trigger bar, patent-pending sear actuator, striker block kit, full spring kit |
Yes. The Apex Forward Set Flat Face Trigger Kit is designed specifically for the M&P 2.0 platform and maintains compatibility with the factory center-mounted safety and M&P 2.0 frame geometry.
The full spring kit supplied here is tuned to deliver between 4 and 5 pounds, though your final result may fall anywhere in the 4–6 pound range depending on your gun's individual return spring and sear spring. This is typical variation in mechanical triggers and not a defect.
The kit contains the forward-set trigger bar, sear actuator, striker block kit, and spring kit. Installation requires gunsmith tools and knowledge; this is not a simple field-strip procedure and should be performed by someone with trigger work experience or by a qualified gunsmith.
The forward-set design, reduced pre-travel, and smoother break are ideal for competitive shooting and training. Many shooters also carry M&P 2.0s with Apex upgrades, though any carry trigger choice is a personal decision based on your training and comfort level.
SKU: 121689086 • Width: 3.6in • Height: 0.9in • Depth: 3.8in • Weight: 0.07oz