APEX TACTICAL SPECIALTIES194202223
Apex Tactical Specialties Sear Red Flat M&P M2.0 Type 3Apex Trigger Kit W/Forward Set$180.50
Availability: In Stock
Current Stock: Out of stock
The Apex Tactical Specialties flat face forward set trigger kit for Smith & Wesson M&P M2.0 metal frame pistols is engineered for shooters who demand a refined, responsive trigger without sacrificing reliability. This is a complete drop-in trigger upgrade—no gunsmithing or special tools required—that combines a patented forward-set design with a flat-faced trigger and adjustable spring options to dial in the exact feel you want, whether you're running duty carry or competing on the range.
What makes this kit stand out is the engineering philosophy: Apex bundled multiple spring weight options into one package, letting you tune your M&P M2.0 trigger pull weight anywhere from approximately 3.3 lbs to 5.5 lbs depending on which springs you install. You get a heavy and duty/carry spring option for both the sear and trigger return, so you can match your mission. The forward-set geometry cuts overall trigger travel by about 40% and dramatically shortens pre-travel, over-travel, and reset distance—meaning faster, more precise follow-up shots and less finger confusion when resetting.
The kit includes a fully machined 2-dot sear, center-mounted pivoting safety that maintains factory safety function, an ultimate striker block kit, and all the hardware needed for installation. The aluminum flat-faced trigger provides a wider contact surface and familiar ergonomics. Apex tested this kit extensively to ensure it performs under real-world conditions. Note: the M2.0 configuration includes an Apex sear plunger that differs from factory setup but delivers the same spring force as the original green spring.
Compatible exclusively with S&W M&P M2.0 metal frame models, including the Competitor and Metal variants. Not compatible with the original M&P platform or M&P Shield pistols.
| Manufacturer | Apex Tactical Specialties Inc |
| Trigger Type | Flat-Face Forward Set |
| Material | Aluminum (trigger), machined steel (sear) |
| Trigger Pull Weight (adjustable) | Approx. 3.3–5.5 lbs |
| Trigger Travel Reduction | ~40% reduction |
| Compatibility | S&W M&P M2.0 metal frame pistols (Competitor, Metal models) |
| Components Included | 13 pieces: trigger, sear, sear actuator, striker block kit, springs (sear & trigger return in heavy and duty/carry weights), safety, sear plunger, rear sight tool |
| Installation | Drop-in; no gunsmithing required |
This kit is designed exclusively for S&W M&P M2.0 metal frame pistols, including the Competitor and Metal variants. It is not compatible with the original M&P, M&P Shield, or other M&P derivatives.
Yes. The kit includes two sear spring options and two trigger return spring options, allowing you to configure your pull weight between approximately 3.3 lbs and 5.5 lbs. Different spring combinations yield different weights; Apex's documentation will guide your selection based on your intended use.
No. This is a drop-in kit that requires no fitting, special tools, or gunsmithing. The kit includes a rear sight tool if you need it, though basic installation is straightforward for anyone comfortable working on their pistol.
The kit provides both options so you can choose the spring weight that suits your mission. The heavy sear spring produces a different pull weight than the duty/carry spring; pairing either with the corresponding trigger return spring lets you dial in your preferred feel for competition, carry, or duty use.
SKU: 167527027 • Weight: 0.2oz
Availability: In Stock
Current Stock: Out of stock
The Apex Tactical Specialties flat face forward set trigger kit for Smith & Wesson M&P M2.0 metal frame pistols is engineered for shooters who demand a refined, responsive trigger without sacrificing reliability. This is a complete drop-in trigger upgrade—no gunsmithing or special tools required—that combines a patented forward-set design with a flat-faced trigger and adjustable spring options to dial in the exact feel you want, whether you're running duty carry or competing on the range.
What makes this kit stand out is the engineering philosophy: Apex bundled multiple spring weight options into one package, letting you tune your M&P M2.0 trigger pull weight anywhere from approximately 3.3 lbs to 5.5 lbs depending on which springs you install. You get a heavy and duty/carry spring option for both the sear and trigger return, so you can match your mission. The forward-set geometry cuts overall trigger travel by about 40% and dramatically shortens pre-travel, over-travel, and reset distance—meaning faster, more precise follow-up shots and less finger confusion when resetting.
The kit includes a fully machined 2-dot sear, center-mounted pivoting safety that maintains factory safety function, an ultimate striker block kit, and all the hardware needed for installation. The aluminum flat-faced trigger provides a wider contact surface and familiar ergonomics. Apex tested this kit extensively to ensure it performs under real-world conditions. Note: the M2.0 configuration includes an Apex sear plunger that differs from factory setup but delivers the same spring force as the original green spring.
Compatible exclusively with S&W M&P M2.0 metal frame models, including the Competitor and Metal variants. Not compatible with the original M&P platform or M&P Shield pistols.
| Manufacturer | Apex Tactical Specialties Inc |
| Trigger Type | Flat-Face Forward Set |
| Material | Aluminum (trigger), machined steel (sear) |
| Trigger Pull Weight (adjustable) | Approx. 3.3–5.5 lbs |
| Trigger Travel Reduction | ~40% reduction |
| Compatibility | S&W M&P M2.0 metal frame pistols (Competitor, Metal models) |
| Components Included | 13 pieces: trigger, sear, sear actuator, striker block kit, springs (sear & trigger return in heavy and duty/carry weights), safety, sear plunger, rear sight tool |
| Installation | Drop-in; no gunsmithing required |
This kit is designed exclusively for S&W M&P M2.0 metal frame pistols, including the Competitor and Metal variants. It is not compatible with the original M&P, M&P Shield, or other M&P derivatives.
Yes. The kit includes two sear spring options and two trigger return spring options, allowing you to configure your pull weight between approximately 3.3 lbs and 5.5 lbs. Different spring combinations yield different weights; Apex's documentation will guide your selection based on your intended use.
No. This is a drop-in kit that requires no fitting, special tools, or gunsmithing. The kit includes a rear sight tool if you need it, though basic installation is straightforward for anyone comfortable working on their pistol.
The kit provides both options so you can choose the spring weight that suits your mission. The heavy sear spring produces a different pull weight than the duty/carry spring; pairing either with the corresponding trigger return spring lets you dial in your preferred feel for competition, carry, or duty use.
SKU: 167527027 • Weight: 0.2oz