APEX TACTICAL SPECIALTIES194195785
Apex Tactical Specialties M&P 2.0 Flat Faced Forward Trigger Kit Polymer Purple$104.50
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Apex Tactical 10027Blk is a flat-face forward set trigger kit engineered specifically for the Smith & Wesson M&P M2.0 metal frame pistol. If you're running a stock M&P M2.0 and find yourself wanting a shorter, crisper trigger pull with less travel and a faster reset, this is the kind of drop-in upgrade that transforms how your gun handles. Apex's forward set design reduces over-travel and pre-travel, giving you a cleaner break and quicker follow-up shots—whether you're training for competition or refining your carry setup.
The kit arrives as a complete 13-piece package with everything needed for installation: a flat-faced trigger assembly, forward set sear actuator, fully machined 2-dot sear, striker block components, and a comprehensive spring selection. That spring variety is the real flexibility here—you get both heavy and duty/carry spring options, meaning you can dial your trigger pull weight to somewhere between 3.3 and 5.5 pounds depending on which springs you choose. No gunsmithing needed; the parts fit directly into your M&P M2.0 without any fitting or modification.
Apex engineered this kit with a center-mounted pivoting safety that keeps factory safety standards intact while upgrading your trigger performance. Travel is reduced roughly 40% compared to stock, and the reset is noticeably shorter. Everything is drop-tested and proven reliable. One important detail: this kit includes an Apex sear plunger that must be installed as part of the trigger assembly—the factory setup doesn't use a plunger, so you'll use Apex's version to achieve the correct pull weight with their spring configuration.
Compatible with M&P M2.0 metal frame pistols, including the Competitor and Metal variants. Not compatible with the original M&P or any M&P Shield model.
| Brand | Apex Tactical Specialties |
| Model | 10027Blk |
| Type | Flat-Face Forward Set Trigger Kit |
| Compatibility | Smith & Wesson M&P M2.0 Metal Frame (Competitor and Metal variants) |
| Trigger Pull Weight (adjustable) | Approximately 3.3 or 5.5 lbs depending on springs installed |
| Trigger Travel Reduction | Approximately 40% reduction vs. factory |
| Pieces Included | 13 total (trigger assembly, sear actuator, 2-dot sear, striker block kit, springs, sear plunger, safety) |
| Finish | Black |
| Installation | Drop-in, no fitting required |
No. The Apex 10027Blk is designed for the M&P M2.0 metal frame pistols only, including the Competitor and Metal variants. It is not compatible with the original M&P or any M&P Shield model.
Yes. The kit includes both heavy and duty/carry spring options that allow you to set the trigger pull weight to approximately 3.3 or 5.5 pounds. You choose which springs to install depending on your intended use—lighter for competition, heavier for duty or carry.
No. The Apex Tactical forward set trigger kit is designed as a direct drop-in replacement with no fitting or modification required. The 13-piece package includes all necessary components, including the sear plunger that must be installed as part of the assembly.
The kit contains 13 pieces total: an aluminum flat-faced forward set trigger with frame-specific safety, forward set sear actuator, fully machined 2-dot sear, ultimate striker block kit (striker block, spring, and rear sight tool), forward set spring kit (heavy sear spring, duty/carry sear spring, heavy and duty/carry trigger return springs, polymer slave pin, and Apex sear plunger).
SKU: 144597367 • Width: 3.6in • Height: 0.4in • Depth: 5in • Weight: 0.07oz
Availability: In Stock
Current Stock: Out of stock
The Apex Tactical 10027Blk is a flat-face forward set trigger kit engineered specifically for the Smith & Wesson M&P M2.0 metal frame pistol. If you're running a stock M&P M2.0 and find yourself wanting a shorter, crisper trigger pull with less travel and a faster reset, this is the kind of drop-in upgrade that transforms how your gun handles. Apex's forward set design reduces over-travel and pre-travel, giving you a cleaner break and quicker follow-up shots—whether you're training for competition or refining your carry setup.
The kit arrives as a complete 13-piece package with everything needed for installation: a flat-faced trigger assembly, forward set sear actuator, fully machined 2-dot sear, striker block components, and a comprehensive spring selection. That spring variety is the real flexibility here—you get both heavy and duty/carry spring options, meaning you can dial your trigger pull weight to somewhere between 3.3 and 5.5 pounds depending on which springs you choose. No gunsmithing needed; the parts fit directly into your M&P M2.0 without any fitting or modification.
Apex engineered this kit with a center-mounted pivoting safety that keeps factory safety standards intact while upgrading your trigger performance. Travel is reduced roughly 40% compared to stock, and the reset is noticeably shorter. Everything is drop-tested and proven reliable. One important detail: this kit includes an Apex sear plunger that must be installed as part of the trigger assembly—the factory setup doesn't use a plunger, so you'll use Apex's version to achieve the correct pull weight with their spring configuration.
Compatible with M&P M2.0 metal frame pistols, including the Competitor and Metal variants. Not compatible with the original M&P or any M&P Shield model.
| Brand | Apex Tactical Specialties |
| Model | 10027Blk |
| Type | Flat-Face Forward Set Trigger Kit |
| Compatibility | Smith & Wesson M&P M2.0 Metal Frame (Competitor and Metal variants) |
| Trigger Pull Weight (adjustable) | Approximately 3.3 or 5.5 lbs depending on springs installed |
| Trigger Travel Reduction | Approximately 40% reduction vs. factory |
| Pieces Included | 13 total (trigger assembly, sear actuator, 2-dot sear, striker block kit, springs, sear plunger, safety) |
| Finish | Black |
| Installation | Drop-in, no fitting required |
No. The Apex 10027Blk is designed for the M&P M2.0 metal frame pistols only, including the Competitor and Metal variants. It is not compatible with the original M&P or any M&P Shield model.
Yes. The kit includes both heavy and duty/carry spring options that allow you to set the trigger pull weight to approximately 3.3 or 5.5 pounds. You choose which springs to install depending on your intended use—lighter for competition, heavier for duty or carry.
No. The Apex Tactical forward set trigger kit is designed as a direct drop-in replacement with no fitting or modification required. The 13-piece package includes all necessary components, including the sear plunger that must be installed as part of the assembly.
The kit contains 13 pieces total: an aluminum flat-faced forward set trigger with frame-specific safety, forward set sear actuator, fully machined 2-dot sear, ultimate striker block kit (striker block, spring, and rear sight tool), forward set spring kit (heavy sear spring, duty/carry sear spring, heavy and duty/carry trigger return springs, polymer slave pin, and Apex sear plunger).
SKU: 144597367 • Width: 3.6in • Height: 0.4in • Depth: 5in • Weight: 0.07oz