Yankee Hill Machine200191065
YHM Hub Direct Thread Mount System M14x1LH Thread$74.75
Availability: In Stock
The YHM Hub Direct Thread Mount System M24x1RH Thread is a versatile adapter that lets you convert Yankee Hill Machine HUB-compatible suppressors into direct-thread suppressors for M24x1RH right-hand threaded barrels. If you're running a HUB suppressor but want the simplicity and rock-solid repeatability of direct threading, this mount bridges that gap without forcing you to replace your suppressor or buy a new host rifle. It's a smart move for shooters who've invested in HUB-equipped cans and want to add a direct-thread barrel to their inventory.
Installation is straightforward: remove the existing mount mechanism from your HUB suppressor, thread the YHM adapter onto the suppressor using a 3/4" open end wrench, then simply thread the whole assembly onto your M24x1RH barrel. The .45 caliber bore accommodates a range of centerfire rifle and large-bore carbine cartridges, making this an adaptable choice for hunters and shooters running various platforms. The adapter itself is built from 17-4 precipitation-hardened stainless steel and finished in black oxide—tough, corrosion-resistant materials that stand up to field use and repeated mounting cycles.
At just 1.7 ounces, this mount adds minimal weight to your suppressor system. Whether you're building out a precision rifle setup or consolidating your suppressors across multiple hosts, the YHM Hub Direct Thread Mount offers a practical solution for shooters who value flexibility without compromise.
| Brand | Yankee Hill Machine |
| Mount Type | Direct Thread Adapter |
| Thread Pattern | M24x1RH (right-hand) |
| Suppressor Compatibility | HUB-compatible suppressors |
| Bore Diameter | .45 caliber |
| Material | 17-4PH precipitation-hardened stainless steel |
| Finish | Black oxide |
| Weight | 1.7 oz |
| Installation Tool Required | 3/4" open-end wrench |
This mount adapts any HUB-compatible Yankee Hill Machine suppressor to direct-thread configuration. It requires removal of the existing HUB mount mechanism from your suppressor before installation.
No. This mount is M24x1RH (right-hand thread). You will need a left-hand variant if your barrel is left-hand threaded.
The .45 caliber bore accommodates centerfire rifle and large-bore cartridges. The actual range depends on the suppressor you're mounting, so consult your suppressor's specifications to confirm compatibility with your specific cartridge.
You'll need a 3/4" open-end wrench to remove the existing HUB mount from your suppressor and to thread on the YHM adapter. No specialized tools are required once the adapter is mounted to your suppressor.
SKU: 200191060 • Width: 3.25in • Height: 1.3in • Depth: 5.5in • Weight: 0.168oz
Availability: In Stock
The YHM Hub Direct Thread Mount System M24x1RH Thread is a versatile adapter that lets you convert Yankee Hill Machine HUB-compatible suppressors into direct-thread suppressors for M24x1RH right-hand threaded barrels. If you're running a HUB suppressor but want the simplicity and rock-solid repeatability of direct threading, this mount bridges that gap without forcing you to replace your suppressor or buy a new host rifle. It's a smart move for shooters who've invested in HUB-equipped cans and want to add a direct-thread barrel to their inventory.
Installation is straightforward: remove the existing mount mechanism from your HUB suppressor, thread the YHM adapter onto the suppressor using a 3/4" open end wrench, then simply thread the whole assembly onto your M24x1RH barrel. The .45 caliber bore accommodates a range of centerfire rifle and large-bore carbine cartridges, making this an adaptable choice for hunters and shooters running various platforms. The adapter itself is built from 17-4 precipitation-hardened stainless steel and finished in black oxide—tough, corrosion-resistant materials that stand up to field use and repeated mounting cycles.
At just 1.7 ounces, this mount adds minimal weight to your suppressor system. Whether you're building out a precision rifle setup or consolidating your suppressors across multiple hosts, the YHM Hub Direct Thread Mount offers a practical solution for shooters who value flexibility without compromise.
| Brand | Yankee Hill Machine |
| Mount Type | Direct Thread Adapter |
| Thread Pattern | M24x1RH (right-hand) |
| Suppressor Compatibility | HUB-compatible suppressors |
| Bore Diameter | .45 caliber |
| Material | 17-4PH precipitation-hardened stainless steel |
| Finish | Black oxide |
| Weight | 1.7 oz |
| Installation Tool Required | 3/4" open-end wrench |
This mount adapts any HUB-compatible Yankee Hill Machine suppressor to direct-thread configuration. It requires removal of the existing HUB mount mechanism from your suppressor before installation.
No. This mount is M24x1RH (right-hand thread). You will need a left-hand variant if your barrel is left-hand threaded.
The .45 caliber bore accommodates centerfire rifle and large-bore cartridges. The actual range depends on the suppressor you're mounting, so consult your suppressor's specifications to confirm compatibility with your specific cartridge.
You'll need a 3/4" open-end wrench to remove the existing HUB mount from your suppressor and to thread on the YHM adapter. No specialized tools are required once the adapter is mounted to your suppressor.
SKU: 200191060 • Width: 3.25in • Height: 1.3in • Depth: 5.5in • Weight: 0.168oz