Yankee Hill Machine200191060
YHM Hub Direct Thread Mount System M24x1RH Thread$74.75
Availability: In Stock
The YHM Hub Direct Thread Mount System 3/4x24 Thread is a direct-thread adapter that lets you convert Yankee Hill Machine HUB-compatible suppressors to a simple, solid mounting platform. If you're running a HUB suppressor and want to skip the traditional mount assembly, this threaded collar does one job well: it screws onto your barrel and accepts your suppressor without additional hardware. No proprietary mounts, no complex setup—just clean, straightforward suppressor mounting for shooters who value simplicity and reliability.
Installation is straightforward. Remove your existing HUB mount from the suppressor, install the direct-thread mount in its place using a 3/4" open-end wrench, and thread the whole assembly onto a 3/4x24 barrel. The mount is machined from 17-4PH stainless steel and heat-treated for durability, then finished in black oxide to resist corrosion. At 1.7 ounces, it adds minimal weight to your rig while giving you a rock-solid connection.
This mount is built for shooters who've already committed to the HUB ecosystem and want to simplify their setup. Whether you're optimizing a precision rifle, a hunting gun, or a precision .45 caliber build, a direct-thread system removes variables and potential issues that come with removable mounts. YHM's engineering means you get a reliable, repeatable interface that stays put shot after shot.
| Thread Size | 3/4x24 |
| Material | 17-4PH Heat-Treated Stainless Steel |
| Finish | Black Oxide |
| Bore Diameter | .45 Caliber |
| Weight | 1.7 oz |
| Installation Tool Required | 3/4" Open-End Wrench |
The YHM Hub Direct Thread Mount works with any HUB-compatible suppressor and any barrel threaded 3/4x24. If your suppressor is HUB-based and your rifle barrel has 3/4x24 threads, you're good to go. If you're unsure about your suppressor's mount type, check the documentation or contact us.
You'll need a 3/4" open-end wrench to uninstall the old mount from your suppressor and thread on the direct-thread adapter. Once installed on the suppressor, simply thread the assembly onto your barrel by hand or with light wrench pressure.
This unit is machined with a .45 caliber bore. Verify your suppressor's intended caliber before pairing it with this mount.
Direct-thread mounts eliminate the connection points and potential loosening that can occur with removable systems. They're lighter, simpler, and provide a more rigid mounting interface—a straightforward option if you plan to leave your suppressor on one rifle.
SKU: 200191058 • Width: 3.25in • Height: 1.3in • Depth: 5.5in • Weight: 0.134oz
Availability: In Stock
The YHM Hub Direct Thread Mount System 3/4x24 Thread is a direct-thread adapter that lets you convert Yankee Hill Machine HUB-compatible suppressors to a simple, solid mounting platform. If you're running a HUB suppressor and want to skip the traditional mount assembly, this threaded collar does one job well: it screws onto your barrel and accepts your suppressor without additional hardware. No proprietary mounts, no complex setup—just clean, straightforward suppressor mounting for shooters who value simplicity and reliability.
Installation is straightforward. Remove your existing HUB mount from the suppressor, install the direct-thread mount in its place using a 3/4" open-end wrench, and thread the whole assembly onto a 3/4x24 barrel. The mount is machined from 17-4PH stainless steel and heat-treated for durability, then finished in black oxide to resist corrosion. At 1.7 ounces, it adds minimal weight to your rig while giving you a rock-solid connection.
This mount is built for shooters who've already committed to the HUB ecosystem and want to simplify their setup. Whether you're optimizing a precision rifle, a hunting gun, or a precision .45 caliber build, a direct-thread system removes variables and potential issues that come with removable mounts. YHM's engineering means you get a reliable, repeatable interface that stays put shot after shot.
| Thread Size | 3/4x24 |
| Material | 17-4PH Heat-Treated Stainless Steel |
| Finish | Black Oxide |
| Bore Diameter | .45 Caliber |
| Weight | 1.7 oz |
| Installation Tool Required | 3/4" Open-End Wrench |
The YHM Hub Direct Thread Mount works with any HUB-compatible suppressor and any barrel threaded 3/4x24. If your suppressor is HUB-based and your rifle barrel has 3/4x24 threads, you're good to go. If you're unsure about your suppressor's mount type, check the documentation or contact us.
You'll need a 3/4" open-end wrench to uninstall the old mount from your suppressor and thread on the direct-thread adapter. Once installed on the suppressor, simply thread the assembly onto your barrel by hand or with light wrench pressure.
This unit is machined with a .45 caliber bore. Verify your suppressor's intended caliber before pairing it with this mount.
Direct-thread mounts eliminate the connection points and potential loosening that can occur with removable systems. They're lighter, simpler, and provide a more rigid mounting interface—a straightforward option if you plan to leave your suppressor on one rifle.
SKU: 200191058 • Width: 3.25in • Height: 1.3in • Depth: 5.5in • Weight: 0.134oz