L.E. Wilson194198739
Wilson Stainless Neck Sizing Die Interchangeable Bushing Type 6mm Dasher Bushing Sold Separately$84.48
Loading...
Loading...
Loading...
Availability: In Stock
The L.E. Wilson stainless neck sizing die with interchangeable bushing type gives precision reloaders direct control over how much the neck of your cartridge case gets sized. Built for the 6mm and 6.5 Creedmoor, this die lets you fine-tune neck tension to match your rifle's chamber and your ammunition demands—a capability that separates careful handloaders from those stuck with one-size-fits-all dies. Unlike conventional sizing dies that use a fixed expander button, the Wilson design eliminates that step, which means better case concentricity and measurably longer brass life. That's why serious shooters and precision rifle builders reach for them.
The die sizes the neck to 3/16" from the case mouth, a proven approach that many shooters prefer for consistent neck tension without working the shoulder. You'll need an arbor press to operate it; the die includes a de-capping rod to handle spent primers. The bushings themselves are sold separately, which lets you buy only the sizes that match your exact needs and swap them as your loads evolve. L.E. Wilson manufactures a wide range of bushing sizes—more than most competitors—so you can dial in the fit for each cartridge and keep your cases running at peak performance across multiple rifles if needed.
This is purpose-built equipment for the reloader who takes neck tension seriously and wants the flexibility to adjust without buying multiple dies. If you're working up precision loads for a 6mm or 6.5 Creedmoor and you've outgrown standard sizing dies, the Wilson neck die puts control back in your hands.
| Caliber | 6mm/6.5 Creedmoor |
| Die Type | Neck Sizing Die, Interchangeable Bushing |
| Material | Stainless Steel |
| Sizing Depth | 3/16" from case mouth |
| Bushing Type | Interchangeable (sold separately) |
| Included Accessories | De-capping rod |
| Manufacturer | L.E. Wilson |
Yes, the die is designed for use with an arbor press. It is not compatible with standard reloading presses.
No, bushings are sold separately. This lets you purchase only the specific sizes you need for your rifles and loads.
Yes, by swapping to different bushing sizes, you can tune neck tension to match the chamber dimensions of different rifles, which is one of the main advantages of the interchangeable bushing design.
By eliminating the conventional expander button and letting you size only the neck to your exact specifications, the die reduces unnecessary working of the case shoulder and body, which extends the number of times you can safely reload that brass.
SKU: 194198736 • Width: 1.5in • Height: 1.5in • Depth: 4.25in • Weight: 0.7oz
Availability: In Stock
The L.E. Wilson stainless neck sizing die with interchangeable bushing type gives precision reloaders direct control over how much the neck of your cartridge case gets sized. Built for the 6mm and 6.5 Creedmoor, this die lets you fine-tune neck tension to match your rifle's chamber and your ammunition demands—a capability that separates careful handloaders from those stuck with one-size-fits-all dies. Unlike conventional sizing dies that use a fixed expander button, the Wilson design eliminates that step, which means better case concentricity and measurably longer brass life. That's why serious shooters and precision rifle builders reach for them.
The die sizes the neck to 3/16" from the case mouth, a proven approach that many shooters prefer for consistent neck tension without working the shoulder. You'll need an arbor press to operate it; the die includes a de-capping rod to handle spent primers. The bushings themselves are sold separately, which lets you buy only the sizes that match your exact needs and swap them as your loads evolve. L.E. Wilson manufactures a wide range of bushing sizes—more than most competitors—so you can dial in the fit for each cartridge and keep your cases running at peak performance across multiple rifles if needed.
This is purpose-built equipment for the reloader who takes neck tension seriously and wants the flexibility to adjust without buying multiple dies. If you're working up precision loads for a 6mm or 6.5 Creedmoor and you've outgrown standard sizing dies, the Wilson neck die puts control back in your hands.
| Caliber | 6mm/6.5 Creedmoor |
| Die Type | Neck Sizing Die, Interchangeable Bushing |
| Material | Stainless Steel |
| Sizing Depth | 3/16" from case mouth |
| Bushing Type | Interchangeable (sold separately) |
| Included Accessories | De-capping rod |
| Manufacturer | L.E. Wilson |
Yes, the die is designed for use with an arbor press. It is not compatible with standard reloading presses.
No, bushings are sold separately. This lets you purchase only the specific sizes you need for your rifles and loads.
Yes, by swapping to different bushing sizes, you can tune neck tension to match the chamber dimensions of different rifles, which is one of the main advantages of the interchangeable bushing design.
By eliminating the conventional expander button and letting you size only the neck to your exact specifications, the die reduces unnecessary working of the case shoulder and body, which extends the number of times you can safely reload that brass.
SKU: 194198736 • Width: 1.5in • Height: 1.5in • Depth: 4.25in • Weight: 0.7oz