L.E. Wilson194198714
Wilson Stainless Neck Sizing Die Interchangeable Bushing Type 6.5 PRC Bushing Sold Separately$84.48
Availability: In Stock
The L.E. Wilson stainless neck sizing die with interchangeable bushing type gives precision handloaders the ability to fine-tune neck tension on fired brass for .308 Win and 7mm-08 cartridges. Unlike full-length sizing dies that resize the entire case, a neck sizing die works only on the case neck—the area that matters most for concentricity and case longevity. By eliminating the conventional expander button and using interchangeable bushings instead, Wilson's design lets you control exactly how much sizing your brass receives, keeping cases fire-formed and maintaining superior runout control shot after shot.
This is the die base only; you'll need to source interchangeable sizing bushings separately to match your desired neck tension. The die is designed for use with an arbor press and sizes the neck to 3/16" from the case mouth, a setup many precision shooters prefer for optimal bullet fit and consistent performance. Each die includes a de-capping rod, so you can deprime fired cases without a separate tool.
If you're serious about handloading for accuracy—whether you're working up loads for a target rifle, a hunting rifle, or both—neck sizing offers real advantages over full-length sizing: less case work per reload cycle, extended brass life, and tighter shot-to-shot consistency. L.E. Wilson's reputation for making a full range of bushing sizes means you can dial in the exact neck tension your setup demands.
| Brand | L.E. Wilson |
| Product Type | Neck Sizing Die – Interchangeable Bushing |
| Caliber | .308 Winchester / 7mm-08 Remington |
| Material | Stainless Steel |
| Sizing Method | Interchangeable bushings (sold separately) |
| Neck Sizing Depth | 3/16" from case mouth |
| Press Type | Arbor Press |
| Included Components | Die base, de-capping rod |
| Bushings | Sold separately |
Neck sizing works only on the case neck, where the bullet seats. Full-length sizing resizes the entire case body. Neck sizing creates less case work, extends brass life, and typically improves concentricity and shot-to-shot consistency—ideal for handloaders focused on accuracy and efficiency.
No. The die base and de-capping rod are included, but interchangeable sizing bushings are sold separately. You'll need to select bushings that match your desired neck tension for your specific ammunition setup.
This die is designed for use with an arbor press, not a conventional reloading press. An arbor press gives you the mechanical advantage and control needed for neck sizing operations.
No. Each caliber requires its own appropriately sized bushing. You will need separate bushings for .308 Winchester and 7mm-08 cases, as they have different neck diameters.
SKU: 194197162 • Width: 1.5in • Height: 1.5in • Depth: 4.25in • Weight: 0.7oz
Availability: In Stock
The L.E. Wilson stainless neck sizing die with interchangeable bushing type gives precision handloaders the ability to fine-tune neck tension on fired brass for .308 Win and 7mm-08 cartridges. Unlike full-length sizing dies that resize the entire case, a neck sizing die works only on the case neck—the area that matters most for concentricity and case longevity. By eliminating the conventional expander button and using interchangeable bushings instead, Wilson's design lets you control exactly how much sizing your brass receives, keeping cases fire-formed and maintaining superior runout control shot after shot.
This is the die base only; you'll need to source interchangeable sizing bushings separately to match your desired neck tension. The die is designed for use with an arbor press and sizes the neck to 3/16" from the case mouth, a setup many precision shooters prefer for optimal bullet fit and consistent performance. Each die includes a de-capping rod, so you can deprime fired cases without a separate tool.
If you're serious about handloading for accuracy—whether you're working up loads for a target rifle, a hunting rifle, or both—neck sizing offers real advantages over full-length sizing: less case work per reload cycle, extended brass life, and tighter shot-to-shot consistency. L.E. Wilson's reputation for making a full range of bushing sizes means you can dial in the exact neck tension your setup demands.
| Brand | L.E. Wilson |
| Product Type | Neck Sizing Die – Interchangeable Bushing |
| Caliber | .308 Winchester / 7mm-08 Remington |
| Material | Stainless Steel |
| Sizing Method | Interchangeable bushings (sold separately) |
| Neck Sizing Depth | 3/16" from case mouth |
| Press Type | Arbor Press |
| Included Components | Die base, de-capping rod |
| Bushings | Sold separately |
Neck sizing works only on the case neck, where the bullet seats. Full-length sizing resizes the entire case body. Neck sizing creates less case work, extends brass life, and typically improves concentricity and shot-to-shot consistency—ideal for handloaders focused on accuracy and efficiency.
No. The die base and de-capping rod are included, but interchangeable sizing bushings are sold separately. You'll need to select bushings that match your desired neck tension for your specific ammunition setup.
This die is designed for use with an arbor press, not a conventional reloading press. An arbor press gives you the mechanical advantage and control needed for neck sizing operations.
No. Each caliber requires its own appropriately sized bushing. You will need separate bushings for .308 Winchester and 7mm-08 cases, as they have different neck diameters.
SKU: 194197162 • Width: 1.5in • Height: 1.5in • Depth: 4.25in • Weight: 0.7oz