Warne Scope Mounts114464098
Warne Skyline Precision Cantilever 34mm Scope Mount - 1.54" Height, 20 MOA, Black$279.99
Availability: In Stock
The Warne Skyline Precision 35mm cantilever scope mount is built for AR platform shooters and competitors who demand reliability in the field or on the line. Machined from 7075 T6 aluminum billet, this scope mount combines precision engineering with the durability needed for high-volume shooting and harsh conditions. The 1.54-inch height positions your optic perfectly for standard AR receiver profiles, while the 20 MOA built-in elevation helps long-range shooters maximize their adjustment range without running out of elevation knob travel.
Structural integrity comes from two integral recoil lugs and four mounting crossbolts—geometry designed to maintain zero shot after shot, whether you're running a precision rifle or a duty-grade build. The 2-inch cantilever forward of the rear receiver rail gives you the eye relief breathing room that modern optics and magnification demand, especially under stress or in awkward shooting positions. Unlike traditional Mil Spec Picatinny mounts, the Warne Skyline uses a STANAG rail interface for tighter, more repeatable alignment while remaining fully compatible with standard Picatinny rails—you get the precision upgrade without gear incompatibility headaches.
Versatility is built in: the scope rings feature ten different accessory mounting locations, letting you run night vision bridges, bubble levels, throw levers, or other tactical add-ons without needing a separate rail or adapter. If you're running a mid-range or high-end optic on a rifle that sees serious use, this mount earns its place in your build.
| Ring Diameter | 35mm |
| Mount Type | Cantilever |
| Height | 1.54 inches |
| Built-in Elevation | 20 MOA |
| Material | 7075 T6 Aluminum Billet |
| Rail Interface | STANAG (Picatinny Compatible) |
| Recoil Lugs | 2 Integral |
| Mounting Bolts | 4 Crossbolts |
| Finish | Black |
Yes. The 1.54-inch height and STANAG rail interface are designed for AR-pattern receivers. It's compatible with standard Picatinny rails, so it will fit any AR platform that accepts a top rail mounted optic.
The mount itself is built with 20 minutes of angle (MOA) of elevation baked into its geometry. This gives your scope an extra 20 MOA of upward adjustment without requiring shims or rail spacers—useful for shooters zeroing for distance or running heavy magnification at extended range.
Yes. The Warne Skyline Precision is engineered with MSR competitors and high-round-count shooters in mind. The rigid construction, recoil lugs, and return-to-zero reliability make it a solid choice for precision rifle matches and demanding training.
The scope rings feature ten mounting locations for direct attachment of accessories like night vision bridges, bubble levels, and throw levers—eliminating the need for separate rails or adapters.
SKU: 114463101 • Width: 6.3in • Height: 3in • Depth: 7.2in • Weight: 0.55oz
Availability: In Stock
The Warne Skyline Precision 35mm cantilever scope mount is built for AR platform shooters and competitors who demand reliability in the field or on the line. Machined from 7075 T6 aluminum billet, this scope mount combines precision engineering with the durability needed for high-volume shooting and harsh conditions. The 1.54-inch height positions your optic perfectly for standard AR receiver profiles, while the 20 MOA built-in elevation helps long-range shooters maximize their adjustment range without running out of elevation knob travel.
Structural integrity comes from two integral recoil lugs and four mounting crossbolts—geometry designed to maintain zero shot after shot, whether you're running a precision rifle or a duty-grade build. The 2-inch cantilever forward of the rear receiver rail gives you the eye relief breathing room that modern optics and magnification demand, especially under stress or in awkward shooting positions. Unlike traditional Mil Spec Picatinny mounts, the Warne Skyline uses a STANAG rail interface for tighter, more repeatable alignment while remaining fully compatible with standard Picatinny rails—you get the precision upgrade without gear incompatibility headaches.
Versatility is built in: the scope rings feature ten different accessory mounting locations, letting you run night vision bridges, bubble levels, throw levers, or other tactical add-ons without needing a separate rail or adapter. If you're running a mid-range or high-end optic on a rifle that sees serious use, this mount earns its place in your build.
| Ring Diameter | 35mm |
| Mount Type | Cantilever |
| Height | 1.54 inches |
| Built-in Elevation | 20 MOA |
| Material | 7075 T6 Aluminum Billet |
| Rail Interface | STANAG (Picatinny Compatible) |
| Recoil Lugs | 2 Integral |
| Mounting Bolts | 4 Crossbolts |
| Finish | Black |
Yes. The 1.54-inch height and STANAG rail interface are designed for AR-pattern receivers. It's compatible with standard Picatinny rails, so it will fit any AR platform that accepts a top rail mounted optic.
The mount itself is built with 20 minutes of angle (MOA) of elevation baked into its geometry. This gives your scope an extra 20 MOA of upward adjustment without requiring shims or rail spacers—useful for shooters zeroing for distance or running heavy magnification at extended range.
Yes. The Warne Skyline Precision is engineered with MSR competitors and high-round-count shooters in mind. The rigid construction, recoil lugs, and return-to-zero reliability make it a solid choice for precision rifle matches and demanding training.
The scope rings feature ten mounting locations for direct attachment of accessories like night vision bridges, bubble levels, and throw levers—eliminating the need for separate rails or adapters.
SKU: 114463101 • Width: 6.3in • Height: 3in • Depth: 7.2in • Weight: 0.55oz