Warne Scope Mounts114464066
Warne Skyline Precision Cantilever 34mm Scope Mount - Black, 1.54" Height, 0 MOA$287.99
Loading...
Loading...
Loading...
Availability: In Stock
The Warne Skyline Precision Cantilever 34mm scope mount is a serious choice for hunters and precision shooters who demand rock-solid repeatability and the flexibility to dial in their optics exactly how they need them. Built from 7075 T6 aluminum billet, this cantilever mount pairs 20 MOA of built-in elevation with a 1.54" center height—a setup that puts most modern cartridges on target at distance while keeping your sight picture high enough for modern rifle profiles and accessories. Whether you're running a long-range hunting rig, a competition rifle, or a hard-use field gun, this mount is engineered to stay put under recoil and return to zero reliably.
What sets the Skyline Precision apart is the thoughtful design behind its accessory system. Ten different mounting interfaces are machined directly into the rings, letting you attach compatible accessories independently of your scope. That means you can dial in your eye relief once and leave it alone—no shuffling rings or loosening bases every time you swap or adjust something. The cantilever design itself places the forward section of the mount well ahead of the rear action, a layout favored for precision work and long-range hunting where every inch of adjustment range and optical clarity counts.
Two integral recoil lugs and four mounting crossbolts anchor this mount to your rifle with the kind of clamping force and contact area that keeps things tight through thousands of rounds. The STANAG rail interface delivers more precise alignment and superior return-to-zero capability than traditional Picatinny rails, while remaining fully compatible with standard Picatinny systems. Black hardcoat anodizing protects against weather and wear in the field.
| Ring Diameter | 34mm |
| Mount Type | Cantilever |
| Elevation Built-in | 20 MOA |
| Center Height | 1.54" |
| Material | 7075 T6 aluminum billet |
| Recoil Lugs | 2 integral |
| Mounting Crossbolts | 4 |
| Rail Interface | STANAG (Picatinny-compatible) |
| Finish | Black anodized |
The Warne Skyline Precision Cantilever mount is designed to fit rifles with Picatinny rails. The STANAG interface is compatible with standard Picatinny mounting systems, so it will work on any modern rifle platform equipped with a Picatinny top rail—AR-15s, bolt guns, lever actions with aftermarket rails, and more.
This mount has a 1.54" center height, which is a tall cantilever setup. The 1.54" measurement is taken from the rifle's rail to the center of the scope tube. Tall mounts like this clear most modern accessories, furniture, and optics, and work well on rifles with modern profiles. Compare this height to your rifle and optics to ensure adequate clearance and proper cheek weld.
No—this is the mount only. Your 34mm scope is sold separately. The mount uses a cantilever design, so the scope tube overhangs the forward portion of the mount.
The integrated 20 MOA elevation tilt pre-angles the scope upward so your turrets have extra travel for downrange shooting. This is useful for long-range hunting and precision applications where you might need to dial elevation adjustments well beyond what an unpressed scope would allow.
SKU: 114464098 • Width: 6.3in • Height: 2.7in • Depth: 7.2in • Weight: 0.5oz
Availability: In Stock
The Warne Skyline Precision Cantilever 34mm scope mount is a serious choice for hunters and precision shooters who demand rock-solid repeatability and the flexibility to dial in their optics exactly how they need them. Built from 7075 T6 aluminum billet, this cantilever mount pairs 20 MOA of built-in elevation with a 1.54" center height—a setup that puts most modern cartridges on target at distance while keeping your sight picture high enough for modern rifle profiles and accessories. Whether you're running a long-range hunting rig, a competition rifle, or a hard-use field gun, this mount is engineered to stay put under recoil and return to zero reliably.
What sets the Skyline Precision apart is the thoughtful design behind its accessory system. Ten different mounting interfaces are machined directly into the rings, letting you attach compatible accessories independently of your scope. That means you can dial in your eye relief once and leave it alone—no shuffling rings or loosening bases every time you swap or adjust something. The cantilever design itself places the forward section of the mount well ahead of the rear action, a layout favored for precision work and long-range hunting where every inch of adjustment range and optical clarity counts.
Two integral recoil lugs and four mounting crossbolts anchor this mount to your rifle with the kind of clamping force and contact area that keeps things tight through thousands of rounds. The STANAG rail interface delivers more precise alignment and superior return-to-zero capability than traditional Picatinny rails, while remaining fully compatible with standard Picatinny systems. Black hardcoat anodizing protects against weather and wear in the field.
| Ring Diameter | 34mm |
| Mount Type | Cantilever |
| Elevation Built-in | 20 MOA |
| Center Height | 1.54" |
| Material | 7075 T6 aluminum billet |
| Recoil Lugs | 2 integral |
| Mounting Crossbolts | 4 |
| Rail Interface | STANAG (Picatinny-compatible) |
| Finish | Black anodized |
The Warne Skyline Precision Cantilever mount is designed to fit rifles with Picatinny rails. The STANAG interface is compatible with standard Picatinny mounting systems, so it will work on any modern rifle platform equipped with a Picatinny top rail—AR-15s, bolt guns, lever actions with aftermarket rails, and more.
This mount has a 1.54" center height, which is a tall cantilever setup. The 1.54" measurement is taken from the rifle's rail to the center of the scope tube. Tall mounts like this clear most modern accessories, furniture, and optics, and work well on rifles with modern profiles. Compare this height to your rifle and optics to ensure adequate clearance and proper cheek weld.
No—this is the mount only. Your 34mm scope is sold separately. The mount uses a cantilever design, so the scope tube overhangs the forward portion of the mount.
The integrated 20 MOA elevation tilt pre-angles the scope upward so your turrets have extra travel for downrange shooting. This is useful for long-range hunting and precision applications where you might need to dial elevation adjustments well beyond what an unpressed scope would allow.
SKU: 114464098 • Width: 6.3in • Height: 2.7in • Depth: 7.2in • Weight: 0.5oz
