Ultradyne USA121685992
Ultradyne Apollo S Compensator 6.5mm 5/8x24 Thread - Precision Muzzle Brake$128.80
Availability: In Stock
The Ultradyne 6.5 Apollo Max Compensator is a precision muzzle brake engineered to manage recoil on 6.5 Creedmoor rifles without the typical trade-offs. Built from 416 stainless steel with a 5/8x24 TPI thread pattern that fits most standard rifle muzzles, this compensator reduces felt recoil while keeping your sight picture clear—the design vents gases downrange and sideways, never upward into your optics or back toward your face. That translates to faster follow-up shots and cleaner target transitions, whether you're running a precision bolt-gun at the range or working through multiple shots in the field.
The engineering here avoids the common frustrations that come with muzzle devices. You get reduced muzzle climb without the flash and blast redirection that makes shooting uncomfortable or compromises your ability to spot your hits. At 4.4 ounces, it's lightweight enough to preserve your rifle's handling, and it's compatible with Ultradyne's Dynamount system for future upgrades. The compensator arrives with a 0.875-inch timing nut, so you can get running immediately once you thread it on.
This is the tool for shooters who value consistency and control. If you're running a 6.5 Creedmoor and you want your second shot to be as easy and accurate as your first—without the muzzle rise that eats into precision—the Apollo Max gets the job done.
| Brand | Ultradyne USA |
| Product Type | Muzzle Brake / Compensator |
| Thread Pattern | 5/8x24 TPI |
| Material | 416 Stainless Steel |
| Weight | 4.4 ounces |
| Includes | 0.875-inch timing nut |
| Compatible Systems | Ultradyne Dynamount |
| Minimum Barrel Length | 12 inches (not recommended for shorter barrels) |
The Ultradyne 6.5 Apollo Max Compensator is threaded for 5/8x24 TPI, which is the standard muzzle thread for most 6.5 Creedmoor rifles.
Yes, the Apollo Max is compatible with Ultradyne's Dynamount system, so you can integrate it into a modular muzzle device setup if you choose to upgrade later.
The compensator ships with a 0.875-inch timing nut, which allows you to install it immediately once you thread it onto your muzzle.
The Apollo Max is not recommended for barrels shorter than 12 inches. If your rifle has a shorter muzzle, contact us to confirm compatibility.
SKU: 115687187 • Width: 2in • Height: 2in • Depth: 4.25in • Weight: 0.44oz
Availability: In Stock
The Ultradyne 6.5 Apollo Max Compensator is a precision muzzle brake engineered to manage recoil on 6.5 Creedmoor rifles without the typical trade-offs. Built from 416 stainless steel with a 5/8x24 TPI thread pattern that fits most standard rifle muzzles, this compensator reduces felt recoil while keeping your sight picture clear—the design vents gases downrange and sideways, never upward into your optics or back toward your face. That translates to faster follow-up shots and cleaner target transitions, whether you're running a precision bolt-gun at the range or working through multiple shots in the field.
The engineering here avoids the common frustrations that come with muzzle devices. You get reduced muzzle climb without the flash and blast redirection that makes shooting uncomfortable or compromises your ability to spot your hits. At 4.4 ounces, it's lightweight enough to preserve your rifle's handling, and it's compatible with Ultradyne's Dynamount system for future upgrades. The compensator arrives with a 0.875-inch timing nut, so you can get running immediately once you thread it on.
This is the tool for shooters who value consistency and control. If you're running a 6.5 Creedmoor and you want your second shot to be as easy and accurate as your first—without the muzzle rise that eats into precision—the Apollo Max gets the job done.
| Brand | Ultradyne USA |
| Product Type | Muzzle Brake / Compensator |
| Thread Pattern | 5/8x24 TPI |
| Material | 416 Stainless Steel |
| Weight | 4.4 ounces |
| Includes | 0.875-inch timing nut |
| Compatible Systems | Ultradyne Dynamount |
| Minimum Barrel Length | 12 inches (not recommended for shorter barrels) |
The Ultradyne 6.5 Apollo Max Compensator is threaded for 5/8x24 TPI, which is the standard muzzle thread for most 6.5 Creedmoor rifles.
Yes, the Apollo Max is compatible with Ultradyne's Dynamount system, so you can integrate it into a modular muzzle device setup if you choose to upgrade later.
The compensator ships with a 0.875-inch timing nut, which allows you to install it immediately once you thread it onto your muzzle.
The Apollo Max is not recommended for barrels shorter than 12 inches. If your rifle has a shorter muzzle, contact us to confirm compatibility.
SKU: 115687187 • Width: 2in • Height: 2in • Depth: 4.25in • Weight: 0.44oz