Trijicon114465576
Trijicon 34mm Cantilever Mount w/Q-LOC, 1.59" Height, Black Finish$296.04
Availability: In Stock
The Trijicon Cantilever Mount with Q-LOC is a 34mm tube optics mount purpose-built for hunters and long-range precision shooters who demand rock-solid repeatability without the bulk. This scope base keeps your optic mounted low over the bore—critical for optimizing sight picture and cheek weld—while the spring-loaded Q-LOC system holds zero reliably even if you forget to fully tighten the retention knobs. One-handed, tool-free installation means you can mount or swap optics in the field without extra gear.
Built from mil-spec 6061-T6 aluminum and finished in matte black, the mount is engineered to survive hard use. It's rated for mil-spec drop tests and works with any standard mil-spec or NATO Picatinny rail, making it a versatile choice across modern rifles. The low-profile design keeps weight minimal while maintaining Trijicon's legendary return-to-zero performance—whether you're glassing from a cold blind or dialing in at a distant range.
Torque specs are straightforward: mount the base to the rail with 12–16 in.-lbs. of spring tension alone, or tighten up to 44–66 in.-lbs. for extra security. Ring caps cap at 14–16 in.-lbs. The mount clears objective lenses up to 56mm, and its 1.535" center height is dialed for co-witnessing or optimal scope viewing geometry depending on your setup. Made in the USA.
| Tube Diameter | 34mm |
| Mounting Height (Rail to Optical Axis) | 1.535" |
| Material | 6061-T6 Aluminum |
| Finish | Matte Black Anodized |
| Maximum Objective Lens Diameter | 56mm |
| Rail Torque Spec (Spring Tension) | 12–16 in.-lbs. |
| Rail Torque Spec (Tightened) | 44–66 in.-lbs. |
| Ring Cap Torque Spec | 14–16 in.-lbs. |
| Rail Compatibility | Mil-Spec and NATO Picatinny |
| Country of Origin | USA |
Yes. The Trijicon Cantilever Mount is compatible with any mil-spec or NATO Picatinny rail system, making it suitable for AR-15s, AR-10s, and other modern sporting rifles with standard receiver-top or handguard rails.
This mount is designed for 34mm tube scopes. It will not fit 30mm or 1-inch scopes.
The spring-loaded Q-LOC design allows you to install and remove your scope one-handed without tools. The spring tension maintains zero retention on the optic automatically; the tightening knobs can be secured further (up to 44–66 in.-lbs. on the rail) for added security, but the mount will hold zero even without over-tightening.
The distance from the top of your Picatinny rail to the optical axis (the center of the scope) is 1.535 inches. This low height is ideal for maintaining a natural cheek weld and sight picture on rifles with adjustable stocks or modern ergonomic setups.
SKU: 114463656 • Width: 5in • Height: 3in • Depth: 8.5in • Weight: 0.63oz
Availability: In Stock
The Trijicon Cantilever Mount with Q-LOC is a 34mm tube optics mount purpose-built for hunters and long-range precision shooters who demand rock-solid repeatability without the bulk. This scope base keeps your optic mounted low over the bore—critical for optimizing sight picture and cheek weld—while the spring-loaded Q-LOC system holds zero reliably even if you forget to fully tighten the retention knobs. One-handed, tool-free installation means you can mount or swap optics in the field without extra gear.
Built from mil-spec 6061-T6 aluminum and finished in matte black, the mount is engineered to survive hard use. It's rated for mil-spec drop tests and works with any standard mil-spec or NATO Picatinny rail, making it a versatile choice across modern rifles. The low-profile design keeps weight minimal while maintaining Trijicon's legendary return-to-zero performance—whether you're glassing from a cold blind or dialing in at a distant range.
Torque specs are straightforward: mount the base to the rail with 12–16 in.-lbs. of spring tension alone, or tighten up to 44–66 in.-lbs. for extra security. Ring caps cap at 14–16 in.-lbs. The mount clears objective lenses up to 56mm, and its 1.535" center height is dialed for co-witnessing or optimal scope viewing geometry depending on your setup. Made in the USA.
| Tube Diameter | 34mm |
| Mounting Height (Rail to Optical Axis) | 1.535" |
| Material | 6061-T6 Aluminum |
| Finish | Matte Black Anodized |
| Maximum Objective Lens Diameter | 56mm |
| Rail Torque Spec (Spring Tension) | 12–16 in.-lbs. |
| Rail Torque Spec (Tightened) | 44–66 in.-lbs. |
| Ring Cap Torque Spec | 14–16 in.-lbs. |
| Rail Compatibility | Mil-Spec and NATO Picatinny |
| Country of Origin | USA |
Yes. The Trijicon Cantilever Mount is compatible with any mil-spec or NATO Picatinny rail system, making it suitable for AR-15s, AR-10s, and other modern sporting rifles with standard receiver-top or handguard rails.
This mount is designed for 34mm tube scopes. It will not fit 30mm or 1-inch scopes.
The spring-loaded Q-LOC design allows you to install and remove your scope one-handed without tools. The spring tension maintains zero retention on the optic automatically; the tightening knobs can be secured further (up to 44–66 in.-lbs. on the rail) for added security, but the mount will hold zero even without over-tightening.
The distance from the top of your Picatinny rail to the optical axis (the center of the scope) is 1.535 inches. This low height is ideal for maintaining a natural cheek weld and sight picture on rifles with adjustable stocks or modern ergonomic setups.
SKU: 114463656 • Width: 5in • Height: 3in • Depth: 8.5in • Weight: 0.63oz