Triggertech115654606
TriggerTech Adjustable Trigger for Remington, 1.5-4LB Pull Weight$174.99
Loading...
Loading...
Loading...
Availability: In Stock
If you're running a Remington 700 and your factory trigger feels mushy or heavy, a TriggerTech Adjustable Trigger for Remington is a straightforward way to sharpen your shot. This drop-in trigger lets you dial in your preferred pull weight between 1.5 and 4 pounds, so whether you're tuning for precision at the bench or setting up for hunting, you can find the break that works best for your style. The design prioritizes a clean, predictable release—TriggerTech calls it "Frictionless Release Technology"—which means minimal creep before the sear trips and very little over-travel after.
Adjusting the pull weight is simple: an externally accessible set screw lets you fine-tune in 1-ounce increments without disassembling the trigger. Many shooters notice the break feels noticeably crisper than heavier factory triggers, and some report the pull weight reading as effectively 0.5 pounds lighter than the measured spec because there's so little friction in the release. Built with 7075-aluminum housing and 440C stainless steel internals, it's engineered to hold up in field conditions.
This is a right-hand trigger designed for Remington 700 models. Installation is a drop-in fit, though a gunsmith can verify your specific action if you're unsure of compatibility. If you've been managing with a stock Rem 700 trigger and you're ready for a noticeable upgrade in trigger control and consistency, this is a proven choice that won't require a complete trigger housing replacement.
| Brand | TriggerTech |
| Product Type | Single-Stage Adjustable Trigger |
| Compatibility | Remington 700 (right-hand) |
| Pull Weight Range | 1.5 to 4.0 lbs |
| Adjustment Increment | 1 ounce |
| Housing Material | 7075 Aluminum |
| Internal Components | 440C Stainless Steel |
| Installation | Drop-in |
This trigger is designed as a drop-in fit for Remington 700 right-hand models. If you have an unusual action variant or left-hand rifle, confirm compatibility before ordering.
An externally accessible set screw lets you adjust the pull weight in 1-ounce increments across the 1.5 to 4.0-pound range. No disassembly is required for adjustment.
It refers to the trigger mechanism's minimal creep (movement before break) and short over-travel (movement after break). The result is a crisp, predictable release that many shooters perceive as feeling lighter and more responsive than a friction-based trigger of the same measured pull weight.
This is a single-stage adjustable trigger, meaning there's one consistent pull weight from start to break with no distinct stages.
SKU: 121685489 • Width: 4.25in • Height: 1.5in • Depth: 5.25in • Weight: 0.38oz
Availability: In Stock
If you're running a Remington 700 and your factory trigger feels mushy or heavy, a TriggerTech Adjustable Trigger for Remington is a straightforward way to sharpen your shot. This drop-in trigger lets you dial in your preferred pull weight between 1.5 and 4 pounds, so whether you're tuning for precision at the bench or setting up for hunting, you can find the break that works best for your style. The design prioritizes a clean, predictable release—TriggerTech calls it "Frictionless Release Technology"—which means minimal creep before the sear trips and very little over-travel after.
Adjusting the pull weight is simple: an externally accessible set screw lets you fine-tune in 1-ounce increments without disassembling the trigger. Many shooters notice the break feels noticeably crisper than heavier factory triggers, and some report the pull weight reading as effectively 0.5 pounds lighter than the measured spec because there's so little friction in the release. Built with 7075-aluminum housing and 440C stainless steel internals, it's engineered to hold up in field conditions.
This is a right-hand trigger designed for Remington 700 models. Installation is a drop-in fit, though a gunsmith can verify your specific action if you're unsure of compatibility. If you've been managing with a stock Rem 700 trigger and you're ready for a noticeable upgrade in trigger control and consistency, this is a proven choice that won't require a complete trigger housing replacement.
| Brand | TriggerTech |
| Product Type | Single-Stage Adjustable Trigger |
| Compatibility | Remington 700 (right-hand) |
| Pull Weight Range | 1.5 to 4.0 lbs |
| Adjustment Increment | 1 ounce |
| Housing Material | 7075 Aluminum |
| Internal Components | 440C Stainless Steel |
| Installation | Drop-in |
This trigger is designed as a drop-in fit for Remington 700 right-hand models. If you have an unusual action variant or left-hand rifle, confirm compatibility before ordering.
An externally accessible set screw lets you adjust the pull weight in 1-ounce increments across the 1.5 to 4.0-pound range. No disassembly is required for adjustment.
It refers to the trigger mechanism's minimal creep (movement before break) and short over-travel (movement after break). The result is a crisp, predictable release that many shooters perceive as feeling lighter and more responsive than a friction-based trigger of the same measured pull weight.
This is a single-stage adjustable trigger, meaning there's one consistent pull weight from start to break with no distinct stages.
SKU: 121685489 • Width: 4.25in • Height: 1.5in • Depth: 5.25in • Weight: 0.38oz