Triggertech121685489
TriggerTech Adjustable Trigger for Remington - 1.5-4LB Pull Weight$184.99
Availability: In Stock
The TriggerTech Adjustable Trigger for Remington is a drop-in upgrade designed to transform the trigger performance of your Remington 700 rifle. Built on TriggerTech's Frictionless Release Technology, this trigger delivers a clean, predictable break with minimal creep and negligible over-travel—the kind of mechanical feedback that tightens groups and builds shooter confidence on the bench, in the field, or at long range.
What sets this trigger apart is its adjustability and consistency. The pull weight ranges from 1.5 to 4.0 pounds and adjusts in 1-ounce increments via an externally accessible set screw, so you can dial in the exact break weight that suits your shooting style or discipline without disassembly. Most shooters report the break feeling roughly half a pound lighter than friction-based triggers pulling the same weight—a direct benefit of the frictionless design. Because there's no reliance on coatings, polishing, or lubrication to function, the trigger maintains that same crisp, consistent break shot after shot and through thousands of rounds, without the drift that plagues conventional designs.
Durability is built in: hardened 440C stainless steel internals resist corrosion and wear, making this trigger equally at home in wet climates, dusty fields, or harsh alpine conditions. The design philosophy—eliminating friction rather than masking it—means you get reliability without the maintenance hassle.
| Brand | TriggerTech |
| Compatibility | Remington 700 |
| Pull Weight Range | 1.5–4.0 lbs |
| Adjustment Increment | 1 oz |
| Adjustment Method | External set screw |
| Internal Material | Hardened 440C stainless steel |
| Installation Type | Drop-in |
Yes. This is a drop-in trigger designed for Remington 700 models. Installation does not require gunsmithing or modification.
Absolutely. The pull weight adjusts from 1.5 to 4.0 pounds in 1-ounce increments using an externally accessible set screw. No disassembly is necessary.
The frictionless design eliminates drag at the engagement surfaces, so the break feels crisper and lighter—typically about half a pound lighter—than conventional friction-based triggers of the same measured weight.
Pull weights are affected by firing pin spring weight. Overweight firing pin springs may cause pull weights to vary above the advertised range. If you're experiencing unexpected pull weight drift, check your firing pin spring.
SKU: 115654606 • Width: 4.25in • Height: 1.5in • Depth: 5.5in • Weight: 0.38oz
Availability: In Stock
The TriggerTech Adjustable Trigger for Remington is a drop-in upgrade designed to transform the trigger performance of your Remington 700 rifle. Built on TriggerTech's Frictionless Release Technology, this trigger delivers a clean, predictable break with minimal creep and negligible over-travel—the kind of mechanical feedback that tightens groups and builds shooter confidence on the bench, in the field, or at long range.
What sets this trigger apart is its adjustability and consistency. The pull weight ranges from 1.5 to 4.0 pounds and adjusts in 1-ounce increments via an externally accessible set screw, so you can dial in the exact break weight that suits your shooting style or discipline without disassembly. Most shooters report the break feeling roughly half a pound lighter than friction-based triggers pulling the same weight—a direct benefit of the frictionless design. Because there's no reliance on coatings, polishing, or lubrication to function, the trigger maintains that same crisp, consistent break shot after shot and through thousands of rounds, without the drift that plagues conventional designs.
Durability is built in: hardened 440C stainless steel internals resist corrosion and wear, making this trigger equally at home in wet climates, dusty fields, or harsh alpine conditions. The design philosophy—eliminating friction rather than masking it—means you get reliability without the maintenance hassle.
| Brand | TriggerTech |
| Compatibility | Remington 700 |
| Pull Weight Range | 1.5–4.0 lbs |
| Adjustment Increment | 1 oz |
| Adjustment Method | External set screw |
| Internal Material | Hardened 440C stainless steel |
| Installation Type | Drop-in |
Yes. This is a drop-in trigger designed for Remington 700 models. Installation does not require gunsmithing or modification.
Absolutely. The pull weight adjusts from 1.5 to 4.0 pounds in 1-ounce increments using an externally accessible set screw. No disassembly is necessary.
The frictionless design eliminates drag at the engagement surfaces, so the break feels crisper and lighter—typically about half a pound lighter—than conventional friction-based triggers of the same measured weight.
Pull weights are affected by firing pin spring weight. Overweight firing pin springs may cause pull weights to vary above the advertised range. If you're experiencing unexpected pull weight drift, check your firing pin spring.
SKU: 115654606 • Width: 4.25in • Height: 1.5in • Depth: 5.5in • Weight: 0.38oz