Talley Manufacturing114465786
Talley Lightweight 2-Piece Scopemount with Integral 1" Rings, Low Profile, Black Anodized for Ruger 10/22$43.68
Availability: In Stock
The Talley Lightweight 2-Piece Scopemount with Integral 1" Rings is a purpose-built optics solution for Ruger 10/22 owners who refuse to sacrifice precision for weight. Unlike traditional scope mounts that bolt ring bases to separate receivers, Talley's integral ring-and-base design eliminates that joint entirely—which means a stronger, more rigid foundation for your scope and real weight savings where they matter. This approach has been the hallmark of Mel Forbes' design philosophy at New Ultralight Arms, and it shows in the execution here.
Medium-height rings position your scope at the optimal sight line for 10/22 irons or backup sights, and the black anodized finish blends seamlessly with your rifle while resisting corrosion in the field. The dual-piece construction (base and integral ring assembly) makes installation straightforward without compromising the rigidity you need for accurate shooting.
Each ring cap measures 5/8" wide and secures with four TORX screws, giving you plenty of clamping surface to keep your scope locked in place during recoil and handling—no creep, no shift. This matters whether you're running a compact rimfire scope on a precision .22 rifle or a general-purpose optic on a hunting rig.
Built for hunters, target shooters, and anyone who runs a scope on a 10/22, this mount rewards attention to detail. The engineering is clean, the weight penalty is negligible, and the strength-to-mass ratio outperforms heavier traditional mounts. If you've already dialed in a 10/22 for hunting or distance shooting, you understand: every fraction of an ounce counts, and stability cannot be compromised.
| Mounting System | 2-Piece (integral ring and base) |
| Ring Size | 1 inch |
| Height | Medium |
| Ring Cap Width | 5/8 inch |
| Screws per Ring Cap | 4 (TORX) |
| Finish | Black Anodized |
| Compatibility | Ruger 10/22 |
Yes, this mount is specifically designed for the Ruger 10/22 platform. The base and ring geometry, along with medium height positioning, are tailored to fit and function on 10/22 receivers.
This mount uses 1-inch integral rings, meaning the rings are built into the mount itself. Your scope must have a 1-inch tube diameter to fit properly.
By combining the ring and base into one unit, there's no joint between them, which creates a stronger, more rigid assembly and eliminates a potential flex point. This also reduces overall weight compared to traditional two-component mounts.
The product ships as a complete 2-piece scopemount assembly with TORX screws. Refer to the product listing for any additional components or accessories bundled with your purchase.
SKU: 114462366 • Width: 5.2in • Height: 2.1in • Depth: 8.4in • Weight: 0.22oz
Availability: In Stock
The Talley Lightweight 2-Piece Scopemount with Integral 1" Rings is a purpose-built optics solution for Ruger 10/22 owners who refuse to sacrifice precision for weight. Unlike traditional scope mounts that bolt ring bases to separate receivers, Talley's integral ring-and-base design eliminates that joint entirely—which means a stronger, more rigid foundation for your scope and real weight savings where they matter. This approach has been the hallmark of Mel Forbes' design philosophy at New Ultralight Arms, and it shows in the execution here.
Medium-height rings position your scope at the optimal sight line for 10/22 irons or backup sights, and the black anodized finish blends seamlessly with your rifle while resisting corrosion in the field. The dual-piece construction (base and integral ring assembly) makes installation straightforward without compromising the rigidity you need for accurate shooting.
Each ring cap measures 5/8" wide and secures with four TORX screws, giving you plenty of clamping surface to keep your scope locked in place during recoil and handling—no creep, no shift. This matters whether you're running a compact rimfire scope on a precision .22 rifle or a general-purpose optic on a hunting rig.
Built for hunters, target shooters, and anyone who runs a scope on a 10/22, this mount rewards attention to detail. The engineering is clean, the weight penalty is negligible, and the strength-to-mass ratio outperforms heavier traditional mounts. If you've already dialed in a 10/22 for hunting or distance shooting, you understand: every fraction of an ounce counts, and stability cannot be compromised.
| Mounting System | 2-Piece (integral ring and base) |
| Ring Size | 1 inch |
| Height | Medium |
| Ring Cap Width | 5/8 inch |
| Screws per Ring Cap | 4 (TORX) |
| Finish | Black Anodized |
| Compatibility | Ruger 10/22 |
Yes, this mount is specifically designed for the Ruger 10/22 platform. The base and ring geometry, along with medium height positioning, are tailored to fit and function on 10/22 receivers.
This mount uses 1-inch integral rings, meaning the rings are built into the mount itself. Your scope must have a 1-inch tube diameter to fit properly.
By combining the ring and base into one unit, there's no joint between them, which creates a stronger, more rigid assembly and eliminates a potential flex point. This also reduces overall weight compared to traditional two-component mounts.
The product ships as a complete 2-piece scopemount assembly with TORX screws. Refer to the product listing for any additional components or accessories bundled with your purchase.
SKU: 114462366 • Width: 5.2in • Height: 2.1in • Depth: 8.4in • Weight: 0.22oz