Talley Manufacturing114462366
Talley Lightweight 2-Piece Scopemount with Integral 1" Rings, Medium Height, Black Anodized for Ruger 10/22$43.09
Loading...
Loading...
Loading...
Availability: In Stock
The Talley Lightweight 2-Piece Scopemount with Integral 1" Rings is a low-profile scope mount purpose-built for the Ruger 10/22 that strips weight without sacrificing strength or reliability. Unlike traditional mounts that join separate rings and bases, Talley's design fuses the ring and base into a unified structure. This single-stage construction eliminates a potential failure point, keeps your rifle lighter, and gives you a mount that's genuinely rigid where it counts. If you're setting up a 10/22 for hunting, plinking, or target work—especially when weight matters—this is the kind of thoughtful engineering that makes a difference over a long day afield.
Built to secure optics firmly without fussiness, each ring cap spans 5/8" wide and fastens with four TORX screws. That wide footprint and multiple contact points mean larger scope tubes stay put through recoil and handling. The low-profile design keeps the scope close to the bore, reducing height over the rifle and maintaining a natural sight picture and cheek weld. Black anodized finish handles field conditions without drawing attention.
This mount reflects the ultralight design philosophy of Mel Forbes and New Ultralight Arms, where every design choice serves a real purpose. Whether you're hunting rimfire game, zeroing a new optic, or just want a dependable mount that won't add heft to your rifle, the Talley delivers.
| Ring Diameter | 1" |
| Ring Cap Width | 5/8" |
| Fastener Type | TORX Screws (4 per cap) |
| Profile | Low |
| Finish | Black Anodized |
| Configuration | 2-Piece |
| Firearm | Ruger 10/22 |
Yes. The Talley Lightweight 2-Piece Scopemount is engineered specifically for the Ruger 10/22 platform.
The integral rings accommodate standard 1" scope tubes. The 5/8" wide ring caps and four TORX screws per cap are designed to secure larger objective lenses firmly without slipping.
The mount consists of two pieces: the left and right ring/base assemblies. Unlike traditional mounts, however, each piece has the ring and base integrated into one unit rather than bolted together separately, reducing weight and eliminating a potential weak point.
The design positions the scope close to the bore with minimal height, promoting a natural sight picture and cheek weld on the 10/22 without excessive elevation over the rifle.
SKU: 114465786 • Width: 3.2in • Height: 2.2in • Depth: 10.3in • Weight: 0.2oz
Availability: In Stock
The Talley Lightweight 2-Piece Scopemount with Integral 1" Rings is a low-profile scope mount purpose-built for the Ruger 10/22 that strips weight without sacrificing strength or reliability. Unlike traditional mounts that join separate rings and bases, Talley's design fuses the ring and base into a unified structure. This single-stage construction eliminates a potential failure point, keeps your rifle lighter, and gives you a mount that's genuinely rigid where it counts. If you're setting up a 10/22 for hunting, plinking, or target work—especially when weight matters—this is the kind of thoughtful engineering that makes a difference over a long day afield.
Built to secure optics firmly without fussiness, each ring cap spans 5/8" wide and fastens with four TORX screws. That wide footprint and multiple contact points mean larger scope tubes stay put through recoil and handling. The low-profile design keeps the scope close to the bore, reducing height over the rifle and maintaining a natural sight picture and cheek weld. Black anodized finish handles field conditions without drawing attention.
This mount reflects the ultralight design philosophy of Mel Forbes and New Ultralight Arms, where every design choice serves a real purpose. Whether you're hunting rimfire game, zeroing a new optic, or just want a dependable mount that won't add heft to your rifle, the Talley delivers.
| Ring Diameter | 1" |
| Ring Cap Width | 5/8" |
| Fastener Type | TORX Screws (4 per cap) |
| Profile | Low |
| Finish | Black Anodized |
| Configuration | 2-Piece |
| Firearm | Ruger 10/22 |
Yes. The Talley Lightweight 2-Piece Scopemount is engineered specifically for the Ruger 10/22 platform.
The integral rings accommodate standard 1" scope tubes. The 5/8" wide ring caps and four TORX screws per cap are designed to secure larger objective lenses firmly without slipping.
The mount consists of two pieces: the left and right ring/base assemblies. Unlike traditional mounts, however, each piece has the ring and base integrated into one unit rather than bolted together separately, reducing weight and eliminating a potential weak point.
The design positions the scope close to the bore with minimal height, promoting a natural sight picture and cheek weld on the 10/22 without excessive elevation over the rifle.
SKU: 114465786 • Width: 3.2in • Height: 2.2in • Depth: 10.3in • Weight: 0.2oz