Seekins Precision114464203
Seekins Precision 30mm Scope Rings - MSR High (1.45"), Matte Finish, 4 Cap Screws$140.00
Loading...
Loading...
Loading...
Availability: In Stock
A quality scope ring is foundational to an accurate, repeatable rifle build—and the Seekins Precision 34mm Scope Rings in MSR High height deliver the precision engineering that separates a rifle that holds zero from one that doesn't. Built from 7075-T6 aluminum and machined to the 1913 Picatinny specification, these rings are designed to lock your optic in place with the kind of rigidity that matters when you're testing load development or executing long-range shots in the field.
The 1.45" MSR High height positions your scope for comfortable sight alignment over modern AR-platform ergonomics and rail systems, leaving adequate clearance for charging handles and co-witnessed backup sights. The four-screw cap design distributes clamping force evenly around the tube, minimizing stress concentration that can cause zero shift or tube deformation over time. Seekins pairs these rings individually and serializes each set, so you get a matched pair engineered to work as a system.
Construction from 7075-T6 aluminum keeps weight minimal without sacrificing rigidity, and the matte finish resists glint while blending cleanly into tactical and hunting builds alike. Grade 8 T-25 Torx fasteners come standard—they're tougher than standard hardware and less prone to cam-out during installation. Whether you're dialing in a precision rifle, building a dedicated AR optics platform, or upgrading rings on a rifle that's seen use, these are engineered for consistency.
| Manufacturer | Seekins Precision |
| Ring Height | 1.45" (MSR High) |
| Ring Diameter | 34mm |
| Tube Material | 7075-T6 Aluminum |
| Rail Specification | 1913 Picatinny |
| Cap Screws | 4 Grade 8 T-25 Torx |
| Finish | Matte |
These are MSR High rings at 1.45" center height. This height is optimized for AR-platform rifles and modern sporting rifles with Picatinny rails, providing proper sight picture and clearance for charging handles and backup iron sights.
Yes. These rings are designed to accommodate 34mm diameter scope tubes, the standard for many quality hunting and tactical optics.
You receive a matched, serialized pair of scope rings with four Grade 8 T-25 Torx cap screws per ring, ready for installation on your Picatinny rail.
7075-T6 is a premium aluminum alloy known for high strength-to-weight ratio and excellent rigidity. It's commonly used in aerospace and precision engineering applications. For scope rings, this means your optic stays locked in alignment without adding unnecessary weight to your rifle.
SKU: 114463501 • Weight: 0.56oz
Availability: In Stock
A quality scope ring is foundational to an accurate, repeatable rifle build—and the Seekins Precision 34mm Scope Rings in MSR High height deliver the precision engineering that separates a rifle that holds zero from one that doesn't. Built from 7075-T6 aluminum and machined to the 1913 Picatinny specification, these rings are designed to lock your optic in place with the kind of rigidity that matters when you're testing load development or executing long-range shots in the field.
The 1.45" MSR High height positions your scope for comfortable sight alignment over modern AR-platform ergonomics and rail systems, leaving adequate clearance for charging handles and co-witnessed backup sights. The four-screw cap design distributes clamping force evenly around the tube, minimizing stress concentration that can cause zero shift or tube deformation over time. Seekins pairs these rings individually and serializes each set, so you get a matched pair engineered to work as a system.
Construction from 7075-T6 aluminum keeps weight minimal without sacrificing rigidity, and the matte finish resists glint while blending cleanly into tactical and hunting builds alike. Grade 8 T-25 Torx fasteners come standard—they're tougher than standard hardware and less prone to cam-out during installation. Whether you're dialing in a precision rifle, building a dedicated AR optics platform, or upgrading rings on a rifle that's seen use, these are engineered for consistency.
| Manufacturer | Seekins Precision |
| Ring Height | 1.45" (MSR High) |
| Ring Diameter | 34mm |
| Tube Material | 7075-T6 Aluminum |
| Rail Specification | 1913 Picatinny |
| Cap Screws | 4 Grade 8 T-25 Torx |
| Finish | Matte |
These are MSR High rings at 1.45" center height. This height is optimized for AR-platform rifles and modern sporting rifles with Picatinny rails, providing proper sight picture and clearance for charging handles and backup iron sights.
Yes. These rings are designed to accommodate 34mm diameter scope tubes, the standard for many quality hunting and tactical optics.
You receive a matched, serialized pair of scope rings with four Grade 8 T-25 Torx cap screws per ring, ready for installation on your Picatinny rail.
7075-T6 is a premium aluminum alloy known for high strength-to-weight ratio and excellent rigidity. It's commonly used in aerospace and precision engineering applications. For scope rings, this means your optic stays locked in alignment without adding unnecessary weight to your rifle.
SKU: 114463501 • Weight: 0.56oz