Seekins Precision114463309
Seekins Precision 34mm Scope Rings, High (1.00"), Matte Finish, 4 Cap Screws$149.00
Loading...
Loading...
Loading...
Availability: In Stock
A scope is only as reliable as the rings holding it. The Seekins Precision 34mm scope rings in low profile (.92") height are built for shooters who demand precision-grade mounting without compromise. Machined from 7075-T6 aluminum and engineered to the mil-spec 1913 Picatinny standard, these rings deliver the kind of rigidity and repeatability that separate a solid setup from one you'll trust at distance. The matte finish resists glare and blends with modern rifle aesthetics—whether you're building a long-range hunter, a competition rifle, or a tactical platform.
What sets Seekins rings apart is obsessive attention to detail. Each pair comes serialized, and the four-cap design distributes clamping pressure evenly across the scope tube, minimizing stress concentration and the risk of tube deformation. Grade 8 T-25 Torx fasteners bite and hold; there's no stripping, no creep, no guessing during torque-down. The low profile (.92") height is the sweet spot for most modern optics on AR platforms and hunting rifles—low enough to co-witness iron sights, high enough to clear most rails and foregrips without unnecessary riser complications.
Whether you're assembling a precision rifle from scratch or upgrading worn or questionable rings on an existing build, choosing Seekins Precision means you're investing in a component that won't be the weak link in your setup. Available in multiple heights to match your specific rifle geometry and optic choice.
| Ring Diameter | 34mm |
| Height | Low Profile (.92") |
| Material | 7075-T6 Aluminum |
| Picatinny Spec | 1913 (Mil-Spec) |
| Cap Design | 4 Screws |
| Fastener Type | Grade 8 T-25 Torx |
| Finish | Matte |
| Configuration | Serialized Pair |
Any scope with a 34mm main tube diameter. This is a standard size for modern hunting and precision rifles. If you're unsure of your scope's tube diameter, check the spec sheet or measure the turret body.
The low profile (.92") height is designed for standard AR platforms and most hunting rifles. It clears typical rails and foregrips while remaining low enough for co-witness with backup iron sights. If you need a different height for your specific setup, Seekins offers additional ring heights: 1.0" High, 1.26" Extra High, and 1.45" AR High.
Consult the manufacturer's torque recommendations for your specific scope. The Grade 8 Torx fasteners are engineered to hold torque reliably; follow your scope and rifle manual for the correct spec.
Contact Bosque Outdoors directly for return and exchange policies.
SKU: 114463653 • Width: 3.5in • Height: 1.8in • Depth: 6.7in • Weight: 0.5oz
Availability: In Stock
A scope is only as reliable as the rings holding it. The Seekins Precision 34mm scope rings in low profile (.92") height are built for shooters who demand precision-grade mounting without compromise. Machined from 7075-T6 aluminum and engineered to the mil-spec 1913 Picatinny standard, these rings deliver the kind of rigidity and repeatability that separate a solid setup from one you'll trust at distance. The matte finish resists glare and blends with modern rifle aesthetics—whether you're building a long-range hunter, a competition rifle, or a tactical platform.
What sets Seekins rings apart is obsessive attention to detail. Each pair comes serialized, and the four-cap design distributes clamping pressure evenly across the scope tube, minimizing stress concentration and the risk of tube deformation. Grade 8 T-25 Torx fasteners bite and hold; there's no stripping, no creep, no guessing during torque-down. The low profile (.92") height is the sweet spot for most modern optics on AR platforms and hunting rifles—low enough to co-witness iron sights, high enough to clear most rails and foregrips without unnecessary riser complications.
Whether you're assembling a precision rifle from scratch or upgrading worn or questionable rings on an existing build, choosing Seekins Precision means you're investing in a component that won't be the weak link in your setup. Available in multiple heights to match your specific rifle geometry and optic choice.
| Ring Diameter | 34mm |
| Height | Low Profile (.92") |
| Material | 7075-T6 Aluminum |
| Picatinny Spec | 1913 (Mil-Spec) |
| Cap Design | 4 Screws |
| Fastener Type | Grade 8 T-25 Torx |
| Finish | Matte |
| Configuration | Serialized Pair |
Any scope with a 34mm main tube diameter. This is a standard size for modern hunting and precision rifles. If you're unsure of your scope's tube diameter, check the spec sheet or measure the turret body.
The low profile (.92") height is designed for standard AR platforms and most hunting rifles. It clears typical rails and foregrips while remaining low enough for co-witness with backup iron sights. If you need a different height for your specific setup, Seekins offers additional ring heights: 1.0" High, 1.26" Extra High, and 1.45" AR High.
Consult the manufacturer's torque recommendations for your specific scope. The Grade 8 Torx fasteners are engineered to hold torque reliably; follow your scope and rifle manual for the correct spec.
Contact Bosque Outdoors directly for return and exchange policies.
SKU: 114463653 • Width: 3.5in • Height: 1.8in • Depth: 6.7in • Weight: 0.5oz