Seekins Precision114461763
Seekins Precision Picatinny 1-Piece Base Matte for Remington 700 SA, 20 MOA, 6-48 Screws$115.00
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
A scope base is only as good as its foundation, and the Seekins Precision Remington 700 SA 20 MOA Picatinny base is built to be exactly that—rock solid and uncompromising. This one-piece billet base is machined from 7075-T6 aluminum to full 1913 Picatinny specification and finished in Type III hardcoat anodized matte black. It's engineered for precision rifle builds where every tenth of an inch matters, whether you're dialing in a long-range hunter or setting up a custom action that demands exact optic mounting.
What sets this base apart is its integral recoil lug, machined directly into the rail itself. This isn't an afterthought—it's a load-bearing feature that locks the base to your action and kills lateral movement when the gun fires. That means zero creep, zero stress on your mounting hardware, and a scope that stays exactly where you zero it. The continuous rail delivers full-length Picatinny compatibility, so you can mount rings anywhere along its length and adjust your sight picture with absolute precision.
The 20 MOA inclination is built in, giving you elevation room on the base itself—useful for long-range setups where you'd otherwise run out of turret adjustment. It ships with Grade 8 T-15 Torx fasteners in 8-40 size, designed for custom actions and upgraded Remington 700 builds that use this thread pattern. Installation is straightforward: the dual fastener holes ensure a bulletproof mechanical connection to your receiver.
If you're building a serious precision rifle and you're not overthinking your base choice, you're doing it wrong. This base removes that variable from the equation.
| Brand | Seekins Precision |
| Rifle Platform | Remington 700 SA (short action) |
| Mount Standard | 1913 Picatinny |
| Material | 7075-T6 aluminum |
| Finish | Type III hardcoat anodized matte black |
| MOA Inclination | 20 MOA |
| Fastener Size | 8-40 (Grade 8 T-15 Torx) |
| Design | One-piece rail with integral recoil lug |
This is designed for Remington 700 short-action (SA) builds using 8-40 fasteners. If your rifle uses the older 6-48 screw pattern, you'll need a different configuration. Verify your action's fastener size before ordering.
The 20 MOA built into the base tilts your scope upward, giving you more elevation adjustment room through your scope's turrets. This is especially useful for long-range hunting or target shooting where you'd otherwise max out your scope's internal elevation adjustment.
Yes. The integral recoil lug prevents the base from shifting rearward under recoil, which protects both your zero and your fasteners. It's a precision feature that justifies the investment in a quality base.
You can mount any standard Picatinny rings anywhere along this rail. The continuous rail design gives you flexibility in where you position your optic for eye relief and cheek weld.
SKU: 114464684 • Width: 3.7in • Height: 1.1in • Depth: 8.4in • Weight: 0.19oz
Availability: In Stock
Current Stock: Out of stock
A scope base is only as good as its foundation, and the Seekins Precision Remington 700 SA 20 MOA Picatinny base is built to be exactly that—rock solid and uncompromising. This one-piece billet base is machined from 7075-T6 aluminum to full 1913 Picatinny specification and finished in Type III hardcoat anodized matte black. It's engineered for precision rifle builds where every tenth of an inch matters, whether you're dialing in a long-range hunter or setting up a custom action that demands exact optic mounting.
What sets this base apart is its integral recoil lug, machined directly into the rail itself. This isn't an afterthought—it's a load-bearing feature that locks the base to your action and kills lateral movement when the gun fires. That means zero creep, zero stress on your mounting hardware, and a scope that stays exactly where you zero it. The continuous rail delivers full-length Picatinny compatibility, so you can mount rings anywhere along its length and adjust your sight picture with absolute precision.
The 20 MOA inclination is built in, giving you elevation room on the base itself—useful for long-range setups where you'd otherwise run out of turret adjustment. It ships with Grade 8 T-15 Torx fasteners in 8-40 size, designed for custom actions and upgraded Remington 700 builds that use this thread pattern. Installation is straightforward: the dual fastener holes ensure a bulletproof mechanical connection to your receiver.
If you're building a serious precision rifle and you're not overthinking your base choice, you're doing it wrong. This base removes that variable from the equation.
| Brand | Seekins Precision |
| Rifle Platform | Remington 700 SA (short action) |
| Mount Standard | 1913 Picatinny |
| Material | 7075-T6 aluminum |
| Finish | Type III hardcoat anodized matte black |
| MOA Inclination | 20 MOA |
| Fastener Size | 8-40 (Grade 8 T-15 Torx) |
| Design | One-piece rail with integral recoil lug |
This is designed for Remington 700 short-action (SA) builds using 8-40 fasteners. If your rifle uses the older 6-48 screw pattern, you'll need a different configuration. Verify your action's fastener size before ordering.
The 20 MOA built into the base tilts your scope upward, giving you more elevation adjustment room through your scope's turrets. This is especially useful for long-range hunting or target shooting where you'd otherwise max out your scope's internal elevation adjustment.
Yes. The integral recoil lug prevents the base from shifting rearward under recoil, which protects both your zero and your fasteners. It's a precision feature that justifies the investment in a quality base.
You can mount any standard Picatinny rings anywhere along this rail. The continuous rail design gives you flexibility in where you position your optic for eye relief and cheek weld.
SKU: 114464684 • Width: 3.7in • Height: 1.1in • Depth: 8.4in • Weight: 0.19oz