Seekins Precision114461679
Seekins Precision Picatinny 1-Piece Base Matte for Remington 700 Short Action, 0 MOA, 6-48 Screws$115.00
Loading...
Loading...
Loading...
Availability: In Stock
The Seekins Precision Picatinny 1-piece base matte for Remington 700 long action is the foundation your precision rifle needs. A scope base is where accuracy begins—any flex, shift, or misalignment cascades through your entire optics system and ruins your zero. Seekins engineered this rail to eliminate that failure point. The single-piece design, machined from solid 7075-T6 aluminum and hardcoat anodized matte black, runs the full length of your receiver with zero compromise. It's built to the 1913 Picatinny specification, so it accepts standard rings and tactical accessories without fuss.
What separates this base from budget alternatives is the integrated recoil lug milled directly into the aluminum. That lug absorbs the hammer blow of recoil and transfers it straight into your action, preventing the base from shifting under fire and keeping stress off the fasteners. The 8-40 screws (Grade 8 T-15 Torx) lock down solid on upgraded or custom Remington 700 long-action receivers. This base ships with zero MOA, so it sits flat—ideal if your rings provide the elevation adjustment, or if you're building a rifle with dedicated optics already dialed in.
Whether you're assembling a long-range hunting rifle, a precision target gun, or a custom build that demands real quality, this Seekins base is worth the investment. It's the kind of part you install once and never think about again because it simply works.
| Brand | Seekins Precision |
| Design | One-piece Picatinny rail |
| Material | 7075-T6 aluminum |
| Finish | Type III hardcoat anodized matte black |
| Rail Standard | 1913 Picatinny (mil-spec) |
| MOA | 0 MOA |
| Fastener Size | 8-40 Torx (Grade 8) |
| Fit | Remington 700 long action (and compatible custom actions) |
| Features | Integrated recoil lug |
Yes. This base is machined for Remington 700 long-action receivers and uses 8-40 fasteners. It's also compatible with some upgraded and custom long-action platforms that accept 8-40 screws. Verify your receiver's fastener specification before purchasing.
Any scope ring or tactical accessory built to the standard 1913 Picatinny specification will mount directly to this rail. That includes hunting scopes, tactical optics, and accessory rails. The base itself is just the platform—you source rings to match your optic and intended use.
The recoil lug is a projection milled into the base that seats against a corresponding cut in your receiver. During firing, it absorbs the rearward force of recoil and channels it into the action itself, rather than letting the base flex or the screws take the shock. This keeps your zero stable and extends the life of your fasteners.
No. This is the base only. You'll need to source Picatinny-compatible rings separately to mount your scope or optic.
SKU: 114463425 • Width: 3.2in • Height: 0.6in • Depth: 9.4in • Weight: 0.25oz
Current Stock: Out of stock
Availability: In Stock
Current Stock: Out of stock
The Seekins Precision Picatinny 1-piece base matte for Remington 700 long action is the foundation your precision rifle needs. A scope base is where accuracy begins—any flex, shift, or misalignment cascades through your entire optics system and ruins your zero. Seekins engineered this rail to eliminate that failure point. The single-piece design, machined from solid 7075-T6 aluminum and hardcoat anodized matte black, runs the full length of your receiver with zero compromise. It's built to the 1913 Picatinny specification, so it accepts standard rings and tactical accessories without fuss.
What separates this base from budget alternatives is the integrated recoil lug milled directly into the aluminum. That lug absorbs the hammer blow of recoil and transfers it straight into your action, preventing the base from shifting under fire and keeping stress off the fasteners. The 8-40 screws (Grade 8 T-15 Torx) lock down solid on upgraded or custom Remington 700 long-action receivers. This base ships with zero MOA, so it sits flat—ideal if your rings provide the elevation adjustment, or if you're building a rifle with dedicated optics already dialed in.
Whether you're assembling a long-range hunting rifle, a precision target gun, or a custom build that demands real quality, this Seekins base is worth the investment. It's the kind of part you install once and never think about again because it simply works.
| Brand | Seekins Precision |
| Design | One-piece Picatinny rail |
| Material | 7075-T6 aluminum |
| Finish | Type III hardcoat anodized matte black |
| Rail Standard | 1913 Picatinny (mil-spec) |
| MOA | 0 MOA |
| Fastener Size | 8-40 Torx (Grade 8) |
| Fit | Remington 700 long action (and compatible custom actions) |
| Features | Integrated recoil lug |
Yes. This base is machined for Remington 700 long-action receivers and uses 8-40 fasteners. It's also compatible with some upgraded and custom long-action platforms that accept 8-40 screws. Verify your receiver's fastener specification before purchasing.
Any scope ring or tactical accessory built to the standard 1913 Picatinny specification will mount directly to this rail. That includes hunting scopes, tactical optics, and accessory rails. The base itself is just the platform—you source rings to match your optic and intended use.
The recoil lug is a projection milled into the base that seats against a corresponding cut in your receiver. During firing, it absorbs the rearward force of recoil and channels it into the action itself, rather than letting the base flex or the screws take the shock. This keeps your zero stable and extends the life of your fasteners.
No. This is the base only. You'll need to source Picatinny-compatible rings separately to mount your scope or optic.
SKU: 114463425 • Width: 3.2in • Height: 0.6in • Depth: 9.4in • Weight: 0.25oz