Availability: In Stock
The Rugged Suppressor MB001 3-Port Brake is a recoil-reduction muzzle device built around Rugged's proven Dual Taper Locking System. If you run Rugged suppressors—the Radiant762, Surge762, Razor762, or Micro30—this brake threads directly onto your rifle and gives you a quick-attach interface that matches your can's taper lock, so swapping between suppressed and unsuppressed shooting is seamless. With its .30 caliber aperture and 5/8"-24 TPI threads, it's engineered for centerfire rifle shooters who want to tame felt recoil on unsuppressed strings while maintaining compatibility with their suppressor setup.
The 3-port design channels gas to mitigate recoil impulse without the blast signature of a traditional muzzle brake. At 2.16 inches long, it's compact enough not to drastically extend your overall length, making it practical for hunting rifles and tactical builds alike. The black finish is durable and low-profile. Timing shims are included, so you can dial in the brake's angular orientation for best gas direction and suppressor alignment.
This is the working solution for shooters who demand consistency between their suppressed and unsuppressed configurations. Whether you're training at the range, hunting in the field, or running a precision rifle, the MB001 bridges the gap—one thread pitch, one brake, one suppressor family.
| Thread Pitch | 5/8"-24 TPI |
| Overall Length | 2.16" |
| Bore Diameter | .30 caliber aperture |
| Finish | Black |
| Locking System | Dual Taper Locking System |
| Included | Timing shims |
The MB001 works with the Radiant762, Surge762, Razor762, and Micro30 suppressors. It uses Rugged's Dual Taper Locking System, which is standard across these cans, allowing fast attachment and removal.
The MB001 features 5/8"-24 TPI threads, which is the standard thread pitch for larger centerfire rifle barrels like .308 Winchester, .300 Win Mag, and similar cartridges.
Yes. The 3-port design is specifically engineered to reduce felt recoil when you're shooting unsuppressed. It directs gas to counteract the rifle's rearward motion.
Yes, timing shims come with the brake. They let you adjust the angular position of the brake to optimize gas direction and ensure proper suppressor alignment when you attach your can.
SKU: 115648419 • Width: 1.5in • Height: 1.5in • Depth: 2.5in • Weight: 0.25oz
Availability: In Stock
The Rugged Suppressor MB001 3-Port Brake is a recoil-reduction muzzle device built around Rugged's proven Dual Taper Locking System. If you run Rugged suppressors—the Radiant762, Surge762, Razor762, or Micro30—this brake threads directly onto your rifle and gives you a quick-attach interface that matches your can's taper lock, so swapping between suppressed and unsuppressed shooting is seamless. With its .30 caliber aperture and 5/8"-24 TPI threads, it's engineered for centerfire rifle shooters who want to tame felt recoil on unsuppressed strings while maintaining compatibility with their suppressor setup.
The 3-port design channels gas to mitigate recoil impulse without the blast signature of a traditional muzzle brake. At 2.16 inches long, it's compact enough not to drastically extend your overall length, making it practical for hunting rifles and tactical builds alike. The black finish is durable and low-profile. Timing shims are included, so you can dial in the brake's angular orientation for best gas direction and suppressor alignment.
This is the working solution for shooters who demand consistency between their suppressed and unsuppressed configurations. Whether you're training at the range, hunting in the field, or running a precision rifle, the MB001 bridges the gap—one thread pitch, one brake, one suppressor family.
| Thread Pitch | 5/8"-24 TPI |
| Overall Length | 2.16" |
| Bore Diameter | .30 caliber aperture |
| Finish | Black |
| Locking System | Dual Taper Locking System |
| Included | Timing shims |
The MB001 works with the Radiant762, Surge762, Razor762, and Micro30 suppressors. It uses Rugged's Dual Taper Locking System, which is standard across these cans, allowing fast attachment and removal.
The MB001 features 5/8"-24 TPI threads, which is the standard thread pitch for larger centerfire rifle barrels like .308 Winchester, .300 Win Mag, and similar cartridges.
Yes. The 3-port design is specifically engineered to reduce felt recoil when you're shooting unsuppressed. It directs gas to counteract the rifle's rearward motion.
Yes, timing shims come with the brake. They let you adjust the angular position of the brake to optimize gas direction and ensure proper suppressor alignment when you attach your can.
SKU: 115648419 • Width: 1.5in • Height: 1.5in • Depth: 2.5in • Weight: 0.25oz