POWERBELT BULLETS115858283
CVA AC1105 450 Bushmaster Muzzle Brake - 11/16"x24 Thread$41.25
Loading...
Loading...
Loading...
Availability: In Stock
If you shoot a Ruger American Rifle in .450 Bushmaster, you know that cartridge hits hard—which means it recoils hard. The Ruger 90641 muzzle brake for Ruger American 450 Bushmaster is engineered to tame that impulse, giving you better control and accuracy as you work through a shooting string. By redirecting gases to manage recoil, this brake lets you stay on target longer and shoot more comfortably, whether you're hunting or running drills at the range.
This is a straightforward, no-frills brake that does the job without overthinking it. It threads onto your barrel with a standard 11/16-24 TPI fit, clocks into position with an external jam nut, and secures in seconds using a basic box wrench or crescent wrench. The design also helps manage noise and blast signature to the sides, which your shooting buddies will appreciate. Built from alloy steel with a matte black finish, it's tough and ready for field use.
Ruger manufactures this brake in the USA, so you're getting a domestically made part that matches your rifle's quality standard. At 3 ounces and just over 2 inches long, it adds minimal length to your setup while delivering real recoil management where you need it most.
| Thread Size | 11/16-24 TPI |
| Overall Length | 2.20 inches |
| Diameter | 1.0 inch |
| Weight | 3.0 ounces |
| Material | Alloy steel |
| Finish | Matte black |
| Compatibility | Ruger American Rifle Ranch, .450 Bushmaster |
Yes. This brake is designed and threaded specifically for the Ruger American Rifle chambered in .450 Bushmaster with 11/16-24 TPI threads. Confirm your barrel's thread pitch and diameter before purchase.
The brake is engineered to reduce felt recoil and manage muzzle impulse, improving your ability to stay on target during rapid fire. The degree of reduction depends on caliber performance and shooting technique.
No. The brake installs quickly using an 11/16 box wrench or crescent wrench to tighten the external jam nut. No special tools or gunsmithing required.
You receive the muzzle brake. Installation requires a standard box wrench or crescent wrench, which you likely already have on hand.
SKU: 115845976 • Weight: 0.25oz
Availability: In Stock
If you shoot a Ruger American Rifle in .450 Bushmaster, you know that cartridge hits hard—which means it recoils hard. The Ruger 90641 muzzle brake for Ruger American 450 Bushmaster is engineered to tame that impulse, giving you better control and accuracy as you work through a shooting string. By redirecting gases to manage recoil, this brake lets you stay on target longer and shoot more comfortably, whether you're hunting or running drills at the range.
This is a straightforward, no-frills brake that does the job without overthinking it. It threads onto your barrel with a standard 11/16-24 TPI fit, clocks into position with an external jam nut, and secures in seconds using a basic box wrench or crescent wrench. The design also helps manage noise and blast signature to the sides, which your shooting buddies will appreciate. Built from alloy steel with a matte black finish, it's tough and ready for field use.
Ruger manufactures this brake in the USA, so you're getting a domestically made part that matches your rifle's quality standard. At 3 ounces and just over 2 inches long, it adds minimal length to your setup while delivering real recoil management where you need it most.
| Thread Size | 11/16-24 TPI |
| Overall Length | 2.20 inches |
| Diameter | 1.0 inch |
| Weight | 3.0 ounces |
| Material | Alloy steel |
| Finish | Matte black |
| Compatibility | Ruger American Rifle Ranch, .450 Bushmaster |
Yes. This brake is designed and threaded specifically for the Ruger American Rifle chambered in .450 Bushmaster with 11/16-24 TPI threads. Confirm your barrel's thread pitch and diameter before purchase.
The brake is engineered to reduce felt recoil and manage muzzle impulse, improving your ability to stay on target during rapid fire. The degree of reduction depends on caliber performance and shooting technique.
No. The brake installs quickly using an 11/16 box wrench or crescent wrench to tighten the external jam nut. No special tools or gunsmithing required.
You receive the muzzle brake. Installation requires a standard box wrench or crescent wrench, which you likely already have on hand.
SKU: 115845976 • Weight: 0.25oz