Rival Arms115665028
Rival Arms V1 Spiral Fluted Threaded Barrel for Glock 17 Gen 3/4, 9mm Luger, Stainless Steel$199.99
Availability: In Stock
If you're running a Glock 17 Gen 3 or Gen 4 in 9mm and want to move beyond what comes factory, a quality aftermarket barrel can genuinely tighten your groups. The Rival Arms Spiral Fluted Stainless Steel Threaded Barrel for Glock 17 Gen 3/4 is built as a match-grade drop-in replacement that handles the precision work without requiring a gunsmith. It's machined from 416R stainless steel billet, so you get the corrosion resistance and durability that outlasts harsh range sessions and field use alike.
What sets this barrel apart is the attention to detail in the finishing. The spiral fluting is more than aesthetic—it reduces weight where it counts without sacrificing rigidity. Inside, a boron nitride treatment (BORSLICK DCD) resists heat and carbon fouling, which means cleaner performance and easier maintenance over time. The bore is individually hand-inspected and target crowned at the muzzle, so you're not gambling on accuracy out of the box. A low-temperature vacuum PVD coating on the exterior provides a hard, durable barrier against wear in the harshest conditions.
The 1/2"-28 threaded muzzle opens the door to suppressors, compensators, and other muzzle devices, giving you flexibility to build the platform you want. Whether you're working up handloads at the bench, pushing precision at an USPSA match, or just chasing tighter groups at the range, a match-grade barrel is one of the few upgrades that delivers measurable results. Drop it in, and you're done—no fitting, no headspace guessing.
| Firearm Fit | Glock 17 Gen 3/4 |
| Caliber | 9mm Luger |
| Material | 416R Stainless Steel |
| Twist Rate | 1:10 |
| Rifling | 6 Groove |
| Muzzle Thread | 1/2"-28 |
| Type | Threaded, Drop-in |
| Bore Treatment | BORSLICK Boron Nitride DCD |
| Exterior Coating | Low-Temperature Vacuum PVD |
Yes. This barrel is designed as a match-grade drop-in replacement for Glock 17 Gen 3 and Gen 4 platforms. No modifications or gunsmith work are needed.
Yes. The barrel is threaded 1/2"-28, which is the standard suppressor thread pitch for 9mm pistols. You can attach any suppressor or compensator rated for that thread specification.
This barrel is machined from a 416R stainless steel billet to match-grade tolerances, individually hand-inspected, and finished with a target crown at the muzzle. These precision manufacturing steps deliver tighter bore concentricity and consistency than typical factory production, which translates to more reliable grouping on target.
Based on the product information provided, you receive the barrel itself. Confirm with our team if any installation hardware or accessories are included with your purchase.
SKU: 115666439 • Width: 3in • Height: 1.6in • Depth: 9.3in • Weight: 0.38oz
Availability: In Stock
If you're running a Glock 17 Gen 3 or Gen 4 in 9mm and want to move beyond what comes factory, a quality aftermarket barrel can genuinely tighten your groups. The Rival Arms Spiral Fluted Stainless Steel Threaded Barrel for Glock 17 Gen 3/4 is built as a match-grade drop-in replacement that handles the precision work without requiring a gunsmith. It's machined from 416R stainless steel billet, so you get the corrosion resistance and durability that outlasts harsh range sessions and field use alike.
What sets this barrel apart is the attention to detail in the finishing. The spiral fluting is more than aesthetic—it reduces weight where it counts without sacrificing rigidity. Inside, a boron nitride treatment (BORSLICK DCD) resists heat and carbon fouling, which means cleaner performance and easier maintenance over time. The bore is individually hand-inspected and target crowned at the muzzle, so you're not gambling on accuracy out of the box. A low-temperature vacuum PVD coating on the exterior provides a hard, durable barrier against wear in the harshest conditions.
The 1/2"-28 threaded muzzle opens the door to suppressors, compensators, and other muzzle devices, giving you flexibility to build the platform you want. Whether you're working up handloads at the bench, pushing precision at an USPSA match, or just chasing tighter groups at the range, a match-grade barrel is one of the few upgrades that delivers measurable results. Drop it in, and you're done—no fitting, no headspace guessing.
| Firearm Fit | Glock 17 Gen 3/4 |
| Caliber | 9mm Luger |
| Material | 416R Stainless Steel |
| Twist Rate | 1:10 |
| Rifling | 6 Groove |
| Muzzle Thread | 1/2"-28 |
| Type | Threaded, Drop-in |
| Bore Treatment | BORSLICK Boron Nitride DCD |
| Exterior Coating | Low-Temperature Vacuum PVD |
Yes. This barrel is designed as a match-grade drop-in replacement for Glock 17 Gen 3 and Gen 4 platforms. No modifications or gunsmith work are needed.
Yes. The barrel is threaded 1/2"-28, which is the standard suppressor thread pitch for 9mm pistols. You can attach any suppressor or compensator rated for that thread specification.
This barrel is machined from a 416R stainless steel billet to match-grade tolerances, individually hand-inspected, and finished with a target crown at the muzzle. These precision manufacturing steps deliver tighter bore concentricity and consistency than typical factory production, which translates to more reliable grouping on target.
Based on the product information provided, you receive the barrel itself. Confirm with our team if any installation hardware or accessories are included with your purchase.
SKU: 115666439 • Width: 3in • Height: 1.6in • Depth: 9.3in • Weight: 0.38oz