Rival Arms115852109
Rival Arms V1 Spiral Fluted Stainless Steel Barrel for Glock 17 Gen 5 - 9mm Luger$179.99
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The Rival Arms V1 Spiral Fluted Stainless Steel Barrel for Glock 17 Gen 3/4 is a match-grade replacement barrel built for shooters serious about accuracy and reliability. Whether you're working toward tighter groups at the range, competing, or just want a factory upgrade, this precision barrel delivers the kind of performance you'd expect from a custom gunsmith—without the gunsmith visit. It's CNC-machined from 416R stainless steel and features a 1:10 twist with 6 groove rifling, designed to handle everything from target ammo to defensive loads in 9mm Luger.
What sets this barrel apart is the attention to detail in every step of manufacture. The barrel receives a low-temperature vacuum PVD coating that creates a tough, wear-resistant finish even in harsh conditions. Inside, the BORSLICK Boron Nitride DCD (Dynamic Compound Deposition) treatment on the bore resists heat and carbon buildup—a real benefit if you shoot hot loads or run extended strings without cleaning breaks. The target-crowned muzzle is precision-finished, and each barrel is hand-inspected before it ships to you. Drop it into your Glock 17 Gen 3 or Gen 4 with zero gunsmithing required.
The spiral fluting isn't just for looks. It reduces overall weight while maintaining rigidity, giving you a barrel that cycles smoothly and prints tight. If you want to thread a suppressor or compensator down the road, the 1/2-28 threads are cut and ready to go. This is the kind of upgrade that pays dividends in consistency and longevity—especially if you reload or shoot frequently.
| Firearm Compatibility | Glock 17 Gen 3/4 |
| Caliber | 9mm Luger |
| Material | 416R Stainless Steel |
| Barrel Twist | 1:10 |
| Rifling | 6 Groove |
| Muzzle Thread | 1/2-28 |
| Muzzle Crown | Target Crowned |
| Coating | Low-temperature Vacuum PVD |
| Bore Treatment | BORSLICK Boron Nitride DCD |
| Installation | Drop-in (No gunsmith required) |
Yes. This barrel is designed as a direct drop-in replacement for Glock 17 Gen 3 and Gen 4 models and requires no gunsmith work to install.
Yes. The barrel features 1/2-28 threaded muzzle, which is the standard thread pitch for most aftermarket suppressors and compensators in 9mm.
The low-temperature vacuum PVD coating protects the exterior of the barrel against wear and corrosion. The BORSLICK Boron Nitride DCD treatment on the inner bore resists heat and carbon buildup inside the barrel, helping maintain accuracy and ease of cleaning over time.
Yes. This is a match-grade precision barrel hand-inspected for accuracy and built from CNC-machined 416R stainless steel with a target-crowned muzzle, designed for shooters who demand tight groups and reliable performance.
SKU: 115699072 • Width: 2.5in • Height: 1.6in • Depth: 7.5in • Weight: 0.34oz
Availability: In Stock
Current Stock: Out of stock
The Rival Arms V1 Spiral Fluted Stainless Steel Barrel for Glock 17 Gen 3/4 is a match-grade replacement barrel built for shooters serious about accuracy and reliability. Whether you're working toward tighter groups at the range, competing, or just want a factory upgrade, this precision barrel delivers the kind of performance you'd expect from a custom gunsmith—without the gunsmith visit. It's CNC-machined from 416R stainless steel and features a 1:10 twist with 6 groove rifling, designed to handle everything from target ammo to defensive loads in 9mm Luger.
What sets this barrel apart is the attention to detail in every step of manufacture. The barrel receives a low-temperature vacuum PVD coating that creates a tough, wear-resistant finish even in harsh conditions. Inside, the BORSLICK Boron Nitride DCD (Dynamic Compound Deposition) treatment on the bore resists heat and carbon buildup—a real benefit if you shoot hot loads or run extended strings without cleaning breaks. The target-crowned muzzle is precision-finished, and each barrel is hand-inspected before it ships to you. Drop it into your Glock 17 Gen 3 or Gen 4 with zero gunsmithing required.
The spiral fluting isn't just for looks. It reduces overall weight while maintaining rigidity, giving you a barrel that cycles smoothly and prints tight. If you want to thread a suppressor or compensator down the road, the 1/2-28 threads are cut and ready to go. This is the kind of upgrade that pays dividends in consistency and longevity—especially if you reload or shoot frequently.
| Firearm Compatibility | Glock 17 Gen 3/4 |
| Caliber | 9mm Luger |
| Material | 416R Stainless Steel |
| Barrel Twist | 1:10 |
| Rifling | 6 Groove |
| Muzzle Thread | 1/2-28 |
| Muzzle Crown | Target Crowned |
| Coating | Low-temperature Vacuum PVD |
| Bore Treatment | BORSLICK Boron Nitride DCD |
| Installation | Drop-in (No gunsmith required) |
Yes. This barrel is designed as a direct drop-in replacement for Glock 17 Gen 3 and Gen 4 models and requires no gunsmith work to install.
Yes. The barrel features 1/2-28 threaded muzzle, which is the standard thread pitch for most aftermarket suppressors and compensators in 9mm.
The low-temperature vacuum PVD coating protects the exterior of the barrel against wear and corrosion. The BORSLICK Boron Nitride DCD treatment on the inner bore resists heat and carbon buildup inside the barrel, helping maintain accuracy and ease of cleaning over time.
Yes. This is a match-grade precision barrel hand-inspected for accuracy and built from CNC-machined 416R stainless steel with a target-crowned muzzle, designed for shooters who demand tight groups and reliable performance.
SKU: 115699072 • Width: 2.5in • Height: 1.6in • Depth: 7.5in • Weight: 0.34oz