Redding Reloading Equipment197558553
Redding Body Die .30-06 Sprg$39.58
Availability: In Stock
Current Stock: Out of stock
The Redding Competition Rifle Seating Die for .30-06 Springfield is built for reloaders who demand tight concentricity and repeatable bullet seating depth. If you've struggled with precision seating dies that allow bullet wander or produce inconsistent runout, this die attacks both problems with a fundamentally different design. The competition-grade seating stem floats on air in its guide—a result of manufacturing tolerances so tight that every cartridge gets the same straight-line support and alignment before the bullet even touches the press. For hand loaders pursuing sub-MOA accuracy or loading match-grade ammo, this level of precision matters.
The core difference lies in how the die supports your work. Rather than relying on the standard seating approach, the .30-06 Sprg competition seating die completely houses both the cartridge case and bullet in a close-fitting, precision-ground sleeve before seating begins. This architecture prevents the bullet from cocking or shifting sideways—the root cause of concentricity issues in conventional dies. The seating stem itself is precision ground to match bullet diameter exactly, eliminating play and wobble that other designs tolerate.
Depth control is handled by a calibrated micrometer marked in .001-inch increments, offering infinite adjustment without detent clicks. That means you can dial in your exact seating depth and lock it down repeatably. The die also includes a setting feature so you can reference your preferred seating depth or match your rifle's chamber geometry without trial and error. One important note: this die is not intended for use with compressed loads, so keep that in mind when working up your .30-06 recipes.
| Caliber | .30-06 Springfield |
| Type | Rifle Seating Die |
| Manufacturer | Redding |
| Micrometer Increments | .001 inch |
No. Redding specifically recommends against using this competition seating die with compressed loads.
The competition design uses a precision-ground seating stem that floats on an air column within an extremely tight guide, paired with a precision-ground sleeve that completely supports and aligns both the cartridge case and bullet before seating. This architecture eliminates the concentricity and bullet wander issues that occur in conventional seating dies.
No. The micrometer is infinitely adjustable without detent clicks, allowing for very fine depth adjustments and a setting feature to reference a preferred seating depth.
This is a .30-06 Springfield seating die. It is caliber-specific and will not work with other cartridges.
SKU: 167526243 • Width: 4.4in • Height: 1.85in • Depth: 6in • Weight: 1.05oz
Availability: In Stock
Current Stock: Out of stock
The Redding Competition Rifle Seating Die for .30-06 Springfield is built for reloaders who demand tight concentricity and repeatable bullet seating depth. If you've struggled with precision seating dies that allow bullet wander or produce inconsistent runout, this die attacks both problems with a fundamentally different design. The competition-grade seating stem floats on air in its guide—a result of manufacturing tolerances so tight that every cartridge gets the same straight-line support and alignment before the bullet even touches the press. For hand loaders pursuing sub-MOA accuracy or loading match-grade ammo, this level of precision matters.
The core difference lies in how the die supports your work. Rather than relying on the standard seating approach, the .30-06 Sprg competition seating die completely houses both the cartridge case and bullet in a close-fitting, precision-ground sleeve before seating begins. This architecture prevents the bullet from cocking or shifting sideways—the root cause of concentricity issues in conventional dies. The seating stem itself is precision ground to match bullet diameter exactly, eliminating play and wobble that other designs tolerate.
Depth control is handled by a calibrated micrometer marked in .001-inch increments, offering infinite adjustment without detent clicks. That means you can dial in your exact seating depth and lock it down repeatably. The die also includes a setting feature so you can reference your preferred seating depth or match your rifle's chamber geometry without trial and error. One important note: this die is not intended for use with compressed loads, so keep that in mind when working up your .30-06 recipes.
| Caliber | .30-06 Springfield |
| Type | Rifle Seating Die |
| Manufacturer | Redding |
| Micrometer Increments | .001 inch |
No. Redding specifically recommends against using this competition seating die with compressed loads.
The competition design uses a precision-ground seating stem that floats on an air column within an extremely tight guide, paired with a precision-ground sleeve that completely supports and aligns both the cartridge case and bullet before seating. This architecture eliminates the concentricity and bullet wander issues that occur in conventional seating dies.
No. The micrometer is infinitely adjustable without detent clicks, allowing for very fine depth adjustments and a setting feature to reference a preferred seating depth.
This is a .30-06 Springfield seating die. It is caliber-specific and will not work with other cartridges.
SKU: 167526243 • Width: 4.4in • Height: 1.85in • Depth: 6in • Weight: 1.05oz