Redding Reloading Equipment167522125
Redding Competition Rifle Seating Die .243 Win$146.63
Availability: In Stock
The Redding Competition Rifle Seating Die for .24 Nosler is a precision reloading die built for handloaders who demand consistency and concentricity in every round they produce. Unlike conventional seating dies, this Redding unit addresses the alignment challenges that plague standard designs through a proprietary seating stem system and manufacturing tolerances that set it apart from the competition. If you're loading for accuracy at distance or prepping match-grade ammunition, this die's engineering delivers the kind of precision that shows up on target.
The core innovation here is the seating stem itself—precision ground to match bullet diameter with such exactness that the stem floats on a column of air within its housing. This isn't marketing speak; it means your bullets are guided into the case with minimal runout. The case and bullet are fully supported and aligned in a close-fitting, precision-ground sleeve before seating begins, eliminating the canting and offset that plague looser die designs.
The micrometer adjustment is equally refined. Calibrated in .001-inch increments and infinitely adjustable without detent clicks, it lets you dial in your exact seating depth and save that setting for repeatable, shot-to-shot consistency. Whether you're fine-tuning for your specific rifle or locking in a preferred seating depth, this feature makes the die friendly to your workflow.
Note: This die is not suitable for compressed loads. If you're running maximum loads in .24 Nosler, verify your reloading manual before committing to a seating depth.
| Product | Redding Competition Rifle Seating Die |
| Caliber | .24 Nosler |
| Type | Rifle Seating Die |
| Micrometer Calibration | .001 inch increments |
| Micrometer Adjustment | Infinitely adjustable (no clicks) |
| Restrictions | Not for use with compressed loads |
The Redding Competition die uses a precision-ground seating stem matched to bullet diameter and a close-fitting alignment sleeve that supports both the case and bullet before seating begins. This design eliminates the concentricity issues inherent in conventional seating dies, resulting in rounds with minimal runout and tighter accuracy at distance.
No. This die is not designed for use with compressed loads. Always verify your reloading manual for your specific .24 Nosler load and seating depth before use.
The micrometer is calibrated in .001-inch increments and adjusts infinitely without clicks, allowing you to dial in exact seating depth. It also has a setting feature so you can lock in and save your preferred depth for consistent, repeatable results.
This is a standard .24 Nosler rifle seating die and will work with any standard reloading press that accepts dies in that caliber. Confirm your press is compatible with rifle dies before purchase.
SKU: 167524799 • Width: 4.4in • Height: 1.75in • Depth: 5.9in • Weight: 0.9oz
Availability: In Stock
The Redding Competition Rifle Seating Die for .24 Nosler is a precision reloading die built for handloaders who demand consistency and concentricity in every round they produce. Unlike conventional seating dies, this Redding unit addresses the alignment challenges that plague standard designs through a proprietary seating stem system and manufacturing tolerances that set it apart from the competition. If you're loading for accuracy at distance or prepping match-grade ammunition, this die's engineering delivers the kind of precision that shows up on target.
The core innovation here is the seating stem itself—precision ground to match bullet diameter with such exactness that the stem floats on a column of air within its housing. This isn't marketing speak; it means your bullets are guided into the case with minimal runout. The case and bullet are fully supported and aligned in a close-fitting, precision-ground sleeve before seating begins, eliminating the canting and offset that plague looser die designs.
The micrometer adjustment is equally refined. Calibrated in .001-inch increments and infinitely adjustable without detent clicks, it lets you dial in your exact seating depth and save that setting for repeatable, shot-to-shot consistency. Whether you're fine-tuning for your specific rifle or locking in a preferred seating depth, this feature makes the die friendly to your workflow.
Note: This die is not suitable for compressed loads. If you're running maximum loads in .24 Nosler, verify your reloading manual before committing to a seating depth.
| Product | Redding Competition Rifle Seating Die |
| Caliber | .24 Nosler |
| Type | Rifle Seating Die |
| Micrometer Calibration | .001 inch increments |
| Micrometer Adjustment | Infinitely adjustable (no clicks) |
| Restrictions | Not for use with compressed loads |
The Redding Competition die uses a precision-ground seating stem matched to bullet diameter and a close-fitting alignment sleeve that supports both the case and bullet before seating begins. This design eliminates the concentricity issues inherent in conventional seating dies, resulting in rounds with minimal runout and tighter accuracy at distance.
No. This die is not designed for use with compressed loads. Always verify your reloading manual for your specific .24 Nosler load and seating depth before use.
The micrometer is calibrated in .001-inch increments and adjusts infinitely without clicks, allowing you to dial in exact seating depth. It also has a setting feature so you can lock in and save your preferred depth for consistent, repeatable results.
This is a standard .24 Nosler rifle seating die and will work with any standard reloading press that accepts dies in that caliber. Confirm your press is compatible with rifle dies before purchase.
SKU: 167524799 • Width: 4.4in • Height: 1.75in • Depth: 5.9in • Weight: 0.9oz