$72.00
Availability: In Stock
Current Stock: Out of stock
The Rearden R2S Flash Hider with 1/2-36 threads is a purpose-built muzzle device designed to work seamlessly with Plan B suppressor mounts. Built from 17-4 PH stainless steel, this flash hider delivers the durability and precision fit you need for a suppressed rifle build. The square shoulder design ensures consistent indexing against your barrel, while the black nitride finish provides both corrosion resistance and a tighter seal for suppressor integration. Whether you're building a precision rifle, a hunting gun, or a range rig, this flash hider gives you a reliable interface between barrel and silencer.
Proper installation is key to getting the most from this muzzle device and the suppressor system it supports. Rearden's design requires careful attention to torque specs and alignment—use an alignment rod during setup, torque the flash hider to 15–25 ft-lbs, then secure it with Rockset compound to prevent backing out. The nitride finish's tighter tolerances demand clean threads and tapers on both the muzzle device and suppressor before assembly; torque the suppressor itself to 10 ft-lbs. If your barrel lacks a thread relief, you may need shims to achieve the correct timing—these are sold separately.
This flash hider is compatible with 17-4 PH Atlas and Atlas XL suppressors, as well as other Plan B-type suppressor mounts. The 1/2-36 thread specification fits many modern rifles, but always verify your barrel's thread pitch and diameter before ordering. Keep in mind that proper installation and maintenance of both the muzzle device and suppressor will ensure reliable function and longevity.
| Thread Pitch | 1/2-36 |
| Shoulder Style | Square |
| Material | 17-4 PH Stainless Steel |
| Finish | Black Nitride (67 HRC) |
| Mount Type | Plan B Compatible |
| Suppressor Compatibility | Atlas, Atlas XL, and other Plan B-type mounts |
| Recommended Flash Hider Torque | 15–25 ft-lbs |
| Recommended Suppressor Torque | 10 ft-lbs |
| Shims Included | No |
The R2S is designed for Plan B-type suppressor mounts and is compatible with 17-4 PH Atlas and Atlas XL suppressors. Always verify your suppressor's mount type before purchase.
The R2S comes with 1/2-36 threads, which is common on many modern rifles. Confirm your barrel's thread specification before ordering.
Shims are not included with this flash hider. If your barrel does not have a thread relief, you may need shims to achieve the correct suppressor timing. Shims are sold separately.
Use an alignment rod during setup to ensure the entire system is square. Torque the flash hider to the barrel at 15–25 ft-lbs, then secure it with Rockset compound to prevent backing out. Clean all threads and tapers before mounting the suppressor, then torque the suppressor to 10 ft-lbs and verify alignment.
SKU: 194199033 • Weight: 0.5oz
Availability: In Stock
Current Stock: Out of stock
The Rearden R2S Flash Hider with 1/2-36 threads is a purpose-built muzzle device designed to work seamlessly with Plan B suppressor mounts. Built from 17-4 PH stainless steel, this flash hider delivers the durability and precision fit you need for a suppressed rifle build. The square shoulder design ensures consistent indexing against your barrel, while the black nitride finish provides both corrosion resistance and a tighter seal for suppressor integration. Whether you're building a precision rifle, a hunting gun, or a range rig, this flash hider gives you a reliable interface between barrel and silencer.
Proper installation is key to getting the most from this muzzle device and the suppressor system it supports. Rearden's design requires careful attention to torque specs and alignment—use an alignment rod during setup, torque the flash hider to 15–25 ft-lbs, then secure it with Rockset compound to prevent backing out. The nitride finish's tighter tolerances demand clean threads and tapers on both the muzzle device and suppressor before assembly; torque the suppressor itself to 10 ft-lbs. If your barrel lacks a thread relief, you may need shims to achieve the correct timing—these are sold separately.
This flash hider is compatible with 17-4 PH Atlas and Atlas XL suppressors, as well as other Plan B-type suppressor mounts. The 1/2-36 thread specification fits many modern rifles, but always verify your barrel's thread pitch and diameter before ordering. Keep in mind that proper installation and maintenance of both the muzzle device and suppressor will ensure reliable function and longevity.
| Thread Pitch | 1/2-36 |
| Shoulder Style | Square |
| Material | 17-4 PH Stainless Steel |
| Finish | Black Nitride (67 HRC) |
| Mount Type | Plan B Compatible |
| Suppressor Compatibility | Atlas, Atlas XL, and other Plan B-type mounts |
| Recommended Flash Hider Torque | 15–25 ft-lbs |
| Recommended Suppressor Torque | 10 ft-lbs |
| Shims Included | No |
The R2S is designed for Plan B-type suppressor mounts and is compatible with 17-4 PH Atlas and Atlas XL suppressors. Always verify your suppressor's mount type before purchase.
The R2S comes with 1/2-36 threads, which is common on many modern rifles. Confirm your barrel's thread specification before ordering.
Shims are not included with this flash hider. If your barrel does not have a thread relief, you may need shims to achieve the correct suppressor timing. Shims are sold separately.
Use an alignment rod during setup to ensure the entire system is square. Torque the flash hider to the barrel at 15–25 ft-lbs, then secure it with Rockset compound to prevent backing out. Clean all threads and tapers before mounting the suppressor, then torque the suppressor to 10 ft-lbs and verify alignment.
SKU: 194199033 • Weight: 0.5oz