
Availability: In Stock
Current Stock: Out of stock
The Rearden FHD FH 5/8-24 Nitride is a muzzle device engineered for shooters who demand durability and precision. Built from 17-4 PH H900 stainless steel with a hardened black nitride finish (67 HRC surface hardness), this adapter is designed to work with Plan B compatible mounting systems, including Atlas and Atlas XL suppressors. If you're running a modern suppressor setup and need a rock-solid interface between your barrel and can, this is the piece that ties it together.
What sets this device apart is the attention to detail in its design. The updated version features larger wrench flats on the rear, making installation and removal easier even when you're working in the field or at the bench. The 5/8-24 thread pitch is a standard on many modern rifle barrels, giving you broad compatibility across common platforms. The black nitride finish isn't just for looks—it's a proven coating that resists corrosion and holds up to hard use, whether you're shooting suppressed or running it solo.
Installation matters. You'll want to use an alignment rod to ensure everything sits true before torquing down. Clean all surfaces thoroughly, apply proper torque, and use Rockset to lock things in place. If your barrel doesn't have a thread relief groove, you may need a shim—check your barrel's shoulder before you assume you're ready to go. Note that using this adapter with a Q Suppressors can void your warranty, so verify compatibility with your specific suppressor before committing.
This is a precision part for a precision job. If you're building or upgrading a suppressor-ready rifle and need a dependable muzzle interface, the Rearden FHD FH gives you the solid construction and design thought that serious shooters expect.
| Material | 17-4 PH H900 Stainless Steel |
| Thread Pitch | 5/8-24 |
| Finish | Black Nitride (67 HRC) |
| Compatibility | Plan B, Atlas, Atlas XL mounts |
| Shims Included | No |
This device is compatible with Plan B, Atlas, and Atlas XL suppressor mounts. It is not recommended for use with Q Suppressors, as doing so voids the warranty.
Shims are not included with the device. Whether you need them depends on your barrel—specifically, whether it has a thread relief groove at the shoulder. If your barrel lacks that relief, you'll need shims to properly time the device. Check your barrel before installation.
You'll need a wrench to torque the device (the enlarged rear flats make this easier), an alignment rod to confirm the system is true, and Rockset to lock the connection once it's tightened. Clean all surfaces thoroughly before assembly.
Yes. The black nitride coating is applied to a hardness of 67 HRC, making it resistant to corrosion and impact. It's a proven finish for hard-use muzzle devices and will hold up well in field conditions.

SKU: 152744878 • Weight: 1oz





Availability: In Stock
Current Stock: Out of stock
The Rearden FHD FH 5/8-24 Nitride is a muzzle device engineered for shooters who demand durability and precision. Built from 17-4 PH H900 stainless steel with a hardened black nitride finish (67 HRC surface hardness), this adapter is designed to work with Plan B compatible mounting systems, including Atlas and Atlas XL suppressors. If you're running a modern suppressor setup and need a rock-solid interface between your barrel and can, this is the piece that ties it together.
What sets this device apart is the attention to detail in its design. The updated version features larger wrench flats on the rear, making installation and removal easier even when you're working in the field or at the bench. The 5/8-24 thread pitch is a standard on many modern rifle barrels, giving you broad compatibility across common platforms. The black nitride finish isn't just for looks—it's a proven coating that resists corrosion and holds up to hard use, whether you're shooting suppressed or running it solo.
Installation matters. You'll want to use an alignment rod to ensure everything sits true before torquing down. Clean all surfaces thoroughly, apply proper torque, and use Rockset to lock things in place. If your barrel doesn't have a thread relief groove, you may need a shim—check your barrel's shoulder before you assume you're ready to go. Note that using this adapter with a Q Suppressors can void your warranty, so verify compatibility with your specific suppressor before committing.
This is a precision part for a precision job. If you're building or upgrading a suppressor-ready rifle and need a dependable muzzle interface, the Rearden FHD FH gives you the solid construction and design thought that serious shooters expect.
| Material | 17-4 PH H900 Stainless Steel |
| Thread Pitch | 5/8-24 |
| Finish | Black Nitride (67 HRC) |
| Compatibility | Plan B, Atlas, Atlas XL mounts |
| Shims Included | No |
This device is compatible with Plan B, Atlas, and Atlas XL suppressor mounts. It is not recommended for use with Q Suppressors, as doing so voids the warranty.
Shims are not included with the device. Whether you need them depends on your barrel—specifically, whether it has a thread relief groove at the shoulder. If your barrel lacks that relief, you'll need shims to properly time the device. Check your barrel before installation.
You'll need a wrench to torque the device (the enlarged rear flats make this easier), an alignment rod to confirm the system is true, and Rockset to lock the connection once it's tightened. Clean all surfaces thoroughly before assembly.
Yes. The black nitride coating is applied to a hardness of 67 HRC, making it resistant to corrosion and impact. It's a proven finish for hard-use muzzle devices and will hold up well in field conditions.
SKU: 152744878 • Weight: 1oz
