Availability: In Stock
The RCBS Summit single stage reloading press brings serious bench-to-target precision to handloaders who demand a no-compromise platform for consistent ammunition assembly. Built from cast iron and steel with a polished 2-inch solid steel ram, the Summit delivers the rigidity and smooth operation that separate quality presses from the rest. This is a tool engineered for reloaders who understand that meticulous case prep and consistent loading cycles directly translate to tighter groups downrange.
The Summit's unconventional C-frame design is its biggest practical advantage: a 4.5-inch frontal opening gives you unrestricted hand access to your cases and dies without the frame obstruction you'll find on traditional designs. Mount it anywhere on your bench—no linkage below means no footprint constraints. The ambidextrous handle accommodates both right- and left-handed loaders equally well, and the zero-fitting ensures you can keep the ram moving smoothly with whatever lubricant works best for you.
This press accepts standard 7/8"-14 threaded dies, and works with 1-1/4"-12 dies when the reducing bushing is removed, giving you broad compatibility with most popular reloading die sets. The die-lowers-to-case action (rather than the case rising to meet the die) means superior control and repeatability through every cycle. Manufactured in the USA, the Summit is built to handle the full spectrum of handloading tasks—from precision rifle cartridges to high-volume pistol rounds—with the kind of solid, predictable performance that keeps serious reloaders coming back.
| Press Type | Single Stage |
| Frame Material | Cast Iron with Steel Linkage |
| Ram Diameter | 2 inches, solid steel, polished |
| Die Thread Compatibility | 7/8"-14 standard; 1-1/4"-12 with bushing removed |
| Frontal Opening | 4.5 inches |
| Hand Configuration | Ambidextrous |
| Lubrication | Zero fitting |
| Manufacturer | Made in the USA |
The Summit works with standard 7/8"-14 threaded dies. With the reducing bushing removed, it also accepts 1-1/4"-12 dies, giving you broad compatibility with most reloading die sets on the market.
Yes. The Summit features an ambidextrous handle design that works equally well for both right- and left-handed loaders.
The C-frame design and lack of linkage below the press mean you can mount it almost anywhere on your bench. With no equipment extending underneath, you have maximum flexibility in your setup without the typical footprint constraints of other single stage presses.
The Summit lowers the die onto the case rather than raising the case to meet the die. This design, combined with the polished 2-inch solid steel ram, delivers smooth, consistent cycles and superior control through every reloading operation.
SKU: 115649473 • Width: 6.75in • Height: 5.75in • Depth: 15.25in • Weight: 21.06oz
Availability: In Stock
The RCBS Summit single stage reloading press brings serious bench-to-target precision to handloaders who demand a no-compromise platform for consistent ammunition assembly. Built from cast iron and steel with a polished 2-inch solid steel ram, the Summit delivers the rigidity and smooth operation that separate quality presses from the rest. This is a tool engineered for reloaders who understand that meticulous case prep and consistent loading cycles directly translate to tighter groups downrange.
The Summit's unconventional C-frame design is its biggest practical advantage: a 4.5-inch frontal opening gives you unrestricted hand access to your cases and dies without the frame obstruction you'll find on traditional designs. Mount it anywhere on your bench—no linkage below means no footprint constraints. The ambidextrous handle accommodates both right- and left-handed loaders equally well, and the zero-fitting ensures you can keep the ram moving smoothly with whatever lubricant works best for you.
This press accepts standard 7/8"-14 threaded dies, and works with 1-1/4"-12 dies when the reducing bushing is removed, giving you broad compatibility with most popular reloading die sets. The die-lowers-to-case action (rather than the case rising to meet the die) means superior control and repeatability through every cycle. Manufactured in the USA, the Summit is built to handle the full spectrum of handloading tasks—from precision rifle cartridges to high-volume pistol rounds—with the kind of solid, predictable performance that keeps serious reloaders coming back.
| Press Type | Single Stage |
| Frame Material | Cast Iron with Steel Linkage |
| Ram Diameter | 2 inches, solid steel, polished |
| Die Thread Compatibility | 7/8"-14 standard; 1-1/4"-12 with bushing removed |
| Frontal Opening | 4.5 inches |
| Hand Configuration | Ambidextrous |
| Lubrication | Zero fitting |
| Manufacturer | Made in the USA |
The Summit works with standard 7/8"-14 threaded dies. With the reducing bushing removed, it also accepts 1-1/4"-12 dies, giving you broad compatibility with most reloading die sets on the market.
Yes. The Summit features an ambidextrous handle design that works equally well for both right- and left-handed loaders.
The C-frame design and lack of linkage below the press mean you can mount it almost anywhere on your bench. With no equipment extending underneath, you have maximum flexibility in your setup without the typical footprint constraints of other single stage presses.
The Summit lowers the die onto the case rather than raising the case to meet the die. This design, combined with the polished 2-inch solid steel ram, delivers smooth, consistent cycles and superior control through every reloading operation.
SKU: 115649473 • Width: 6.75in • Height: 5.75in • Depth: 15.25in • Weight: 21.06oz