RCBS144600678
Rcbs 9225 Single Stage Shell Holder 8Mm Nambu #25$10.31
Availability: In Stock
The RCBS 9232 Single Stage Shell Holder #32 is a precision reloading accessory engineered for shooters working with 22/6mm PPC, 264 LBC-AR, and 7.62x39mm cartridges. Whether you're handloading match ammunition, wildcats, or military surplus cases, a proper shell holder is foundational to consistent, safe reloading—it's what ensures your cases are centered and headspaced correctly in the die with every stroke of the press.
Built from hardened steel, this shell holder is designed to work with single-stage and turret presses. It captures the case head in its bore, holding 0.125 inch of the case head to maintain proper SAAMI headspacing as you size and reform your brass. The specificity of #32 sizing makes it compatible with the cartridges listed—getting the right holder for your caliber matters, because an oversized holder risks sloppy case alignment, while an undersized one won't fit your brass at all.
If you reload 22 PPC variants, have a 264 LBC-AR setup, or process 7.62x39mm for precision work, the RCBS 9232 is a straightforward, no-nonsense component that belongs in your press. It's the kind of thing you buy once and forget about—until you notice your case concentricity is rock-solid.
This holder is sized for 22/6mm PPC, 264 LBC-AR, and 7.62x39mm cartridges. Shell holders are caliber-specific, so confirm your cartridge matches the #32 specification before purchase.
Yes. The RCBS 9232 is designed for single-stage and turret presses. Check your press manual to ensure compatibility with the shell holder system.
The holder captures 0.125 inch of your case head, positioning it for proper alignment with the die and maintaining correct headspacing during sizing and forming operations. This is critical for consistent reloading and safe ammunition.
SKU: 115667275 • Width: 2in • Height: 0.1in • Depth: 6in • Weight: 0.06oz
Availability: In Stock
The RCBS 9232 Single Stage Shell Holder #32 is a precision reloading accessory engineered for shooters working with 22/6mm PPC, 264 LBC-AR, and 7.62x39mm cartridges. Whether you're handloading match ammunition, wildcats, or military surplus cases, a proper shell holder is foundational to consistent, safe reloading—it's what ensures your cases are centered and headspaced correctly in the die with every stroke of the press.
Built from hardened steel, this shell holder is designed to work with single-stage and turret presses. It captures the case head in its bore, holding 0.125 inch of the case head to maintain proper SAAMI headspacing as you size and reform your brass. The specificity of #32 sizing makes it compatible with the cartridges listed—getting the right holder for your caliber matters, because an oversized holder risks sloppy case alignment, while an undersized one won't fit your brass at all.
If you reload 22 PPC variants, have a 264 LBC-AR setup, or process 7.62x39mm for precision work, the RCBS 9232 is a straightforward, no-nonsense component that belongs in your press. It's the kind of thing you buy once and forget about—until you notice your case concentricity is rock-solid.
This holder is sized for 22/6mm PPC, 264 LBC-AR, and 7.62x39mm cartridges. Shell holders are caliber-specific, so confirm your cartridge matches the #32 specification before purchase.
Yes. The RCBS 9232 is designed for single-stage and turret presses. Check your press manual to ensure compatibility with the shell holder system.
The holder captures 0.125 inch of your case head, positioning it for proper alignment with the die and maintaining correct headspacing during sizing and forming operations. This is critical for consistent reloading and safe ammunition.
SKU: 115667275 • Width: 2in • Height: 0.1in • Depth: 6in • Weight: 0.06oz
