$10.31
Loading...
Loading...
Loading...
Availability: In Stock
The RCBS 9205 Single Stage Shell Holder #5 is the precision component that keeps your 348 Winchester cases properly aligned and positioned during the reloading process. If you're loading for this classic cartridge on a single-stage or turret press, the right shell holder is non-negotiable—it ensures your cases sit at the correct headspace depth relative to the die, which directly affects case life, accuracy, and safety. This RCBS #5 holder is engineered specifically for 348 Winchester case heads, so you get a snug, reliable fit every time you seat a case into the press.
Built from hardened steel, RCBS shell holders are made to withstand repeated cycling and the pressures of full-power rifle cartridges. The holder captures 0.125 inch of the case head, holding it firmly in the correct position as the die performs its work—whether you're resizing, priming, or seating bullets. That precision contact zone is what separates a solid reloading setup from one that drifts and causes headspace inconsistencies. Over hundreds or thousands of rounds, that consistency compounds into reliable brass and predictable ballistics.
The #5 designation is specific to 348 Winchester, so verify compatibility with your case before ordering if you're reloading multiple cartridges. RCBS makes different numbered holders for different case head sizes, and using the correct one for your caliber is part of safe, accurate reloading practice.
| Product Name | RCBS 9205 Single Stage Shell Holder #5 |
| Cartridge | 348 Winchester |
| Holder Type | Single Stage / Turret Press |
| Material | Hardened Steel |
| Case Head Engagement | 0.125 inch |
Yes. The RCBS #5 is designed for both single-stage and turret press applications. It will fit the shell holder slot on either press type.
Yes, this RCBS 9205 #5 holder is sized specifically for 348 Winchester case heads. If you're loading multiple calibers, each cartridge may require a different numbered holder to ensure proper fit and headspacing.
That 0.125 inch of contact between the holder and the case head positions the case at the correct depth relative to the die, ensuring consistent headspacing throughout your reloading session and contributing to safe, accurate ammunition.
SKU: 115677918 • Width: 2in • Height: 1in • Depth: 6in • Weight: 0.1oz
Availability: In Stock
The RCBS 9205 Single Stage Shell Holder #5 is the precision component that keeps your 348 Winchester cases properly aligned and positioned during the reloading process. If you're loading for this classic cartridge on a single-stage or turret press, the right shell holder is non-negotiable—it ensures your cases sit at the correct headspace depth relative to the die, which directly affects case life, accuracy, and safety. This RCBS #5 holder is engineered specifically for 348 Winchester case heads, so you get a snug, reliable fit every time you seat a case into the press.
Built from hardened steel, RCBS shell holders are made to withstand repeated cycling and the pressures of full-power rifle cartridges. The holder captures 0.125 inch of the case head, holding it firmly in the correct position as the die performs its work—whether you're resizing, priming, or seating bullets. That precision contact zone is what separates a solid reloading setup from one that drifts and causes headspace inconsistencies. Over hundreds or thousands of rounds, that consistency compounds into reliable brass and predictable ballistics.
The #5 designation is specific to 348 Winchester, so verify compatibility with your case before ordering if you're reloading multiple cartridges. RCBS makes different numbered holders for different case head sizes, and using the correct one for your caliber is part of safe, accurate reloading practice.
| Product Name | RCBS 9205 Single Stage Shell Holder #5 |
| Cartridge | 348 Winchester |
| Holder Type | Single Stage / Turret Press |
| Material | Hardened Steel |
| Case Head Engagement | 0.125 inch |
Yes. The RCBS #5 is designed for both single-stage and turret press applications. It will fit the shell holder slot on either press type.
Yes, this RCBS 9205 #5 holder is sized specifically for 348 Winchester case heads. If you're loading multiple calibers, each cartridge may require a different numbered holder to ensure proper fit and headspacing.
That 0.125 inch of contact between the holder and the case head positions the case at the correct depth relative to the die, ensuring consistent headspacing throughout your reloading session and contributing to safe, accurate ammunition.
SKU: 115677918 • Width: 2in • Height: 1in • Depth: 6in • Weight: 0.1oz
