$9.38
Availability: In Stock
The RCBS 9209 single stage shell holder is a precision-engineered cartridge positioning tool for reloaders working with 6.5x54mm Mannlicher and .35 Remington ammunition. Whether you're setting up a single-stage press for meticulous handloading or running a turret setup, this shell holder ensures consistent case alignment with your dies—a small detail that pays dividends in accuracy and longevity. Built from hardened steel, it's made to withstand repeated use and handle the mechanical forces of the reloading process without wear or deformation.
Proper case headspacing matters. The holder captures the case head and positions it precisely relative to your die, maintaining SAAMI-spec dimensions across your run. That consistency translates to uniform sizing, seating, and overall case prep. If you're hand-loading these cartridges—whether for a classic Mannlicher-Schoenauer rifle or a vintage .35 Remington lever gun—a dedicated, properly-sized shell holder beats improvisation every time.
RCBS shell holders are modular by design, so you can build a reloading setup that grows with your cartridge collection. The #9 sizing fits the specific case head diameter of these two cartridges, so you'll need the right holder for each round you load.
| Brand | RCBS |
| Model Number | 9209 |
| Type | Single Stage Shell Holder |
| Cartridge Compatibility | 6.5x54mm Mannlicher, .35 Remington |
| Material | Hardened Steel |
| Case Head Capture | 0.125 inch |
Yes. The RCBS 9209 is designed for use in single-stage presses and is also compatible with turret-style presses.
The #9 is sized for 6.5x54mm Mannlicher and .35 Remington cases.
The shell holder aligns your case head consistently with the die, maintaining proper headspacing according to SAAMI specifications. This ensures uniform sizing, seating depth, and overall case dimensions across your entire batch of reloads.
Yes. Shell holders are cartridge-specific because case head diameters vary. You'll need a #9 for 6.5x54mm Mannlicher and .35 Remington, and different numbered holders for other rounds.
SKU: 115780004 • Width: 2in • Height: 0.1in • Depth: 5.7in • Weight: 0.15oz
Availability: In Stock
The RCBS 9209 single stage shell holder is a precision-engineered cartridge positioning tool for reloaders working with 6.5x54mm Mannlicher and .35 Remington ammunition. Whether you're setting up a single-stage press for meticulous handloading or running a turret setup, this shell holder ensures consistent case alignment with your dies—a small detail that pays dividends in accuracy and longevity. Built from hardened steel, it's made to withstand repeated use and handle the mechanical forces of the reloading process without wear or deformation.
Proper case headspacing matters. The holder captures the case head and positions it precisely relative to your die, maintaining SAAMI-spec dimensions across your run. That consistency translates to uniform sizing, seating, and overall case prep. If you're hand-loading these cartridges—whether for a classic Mannlicher-Schoenauer rifle or a vintage .35 Remington lever gun—a dedicated, properly-sized shell holder beats improvisation every time.
RCBS shell holders are modular by design, so you can build a reloading setup that grows with your cartridge collection. The #9 sizing fits the specific case head diameter of these two cartridges, so you'll need the right holder for each round you load.
| Brand | RCBS |
| Model Number | 9209 |
| Type | Single Stage Shell Holder |
| Cartridge Compatibility | 6.5x54mm Mannlicher, .35 Remington |
| Material | Hardened Steel |
| Case Head Capture | 0.125 inch |
Yes. The RCBS 9209 is designed for use in single-stage presses and is also compatible with turret-style presses.
The #9 is sized for 6.5x54mm Mannlicher and .35 Remington cases.
The shell holder aligns your case head consistently with the die, maintaining proper headspacing according to SAAMI specifications. This ensures uniform sizing, seating depth, and overall case dimensions across your entire batch of reloads.
Yes. Shell holders are cartridge-specific because case head diameters vary. You'll need a #9 for 6.5x54mm Mannlicher and .35 Remington, and different numbered holders for other rounds.
SKU: 115780004 • Width: 2in • Height: 0.1in • Depth: 5.7in • Weight: 0.15oz