Availability: In Stock
The RCBS 9202 Single Stage Shell Holder #2 is a hardened steel component built to anchor your cartridge cases during the reloading process. If you're running a single-stage or turret press and need consistent case alignment with your dies, this holder ensures your cases sit at the correct headspace every time you pull the handle. It's sized to accommodate specific case head dimensions and captures 0.125 inch of the case head—the engineering that keeps your reloads safe and repeatable.
Shell holders are one of those often-overlooked details that separate solid reloading from sloppy reloading. The right holder for your caliber means zero case wandering, better concentricity, and dies that wear evenly. This is hardened steel, not stamped tin, so it'll outlast your press if you treat it right.
The #2 designation tells you which case families this holder accommodates—that specificity matters. If you're loading multiple calibers, you'll likely need different holders for different cartridge head sizes, but once you've got the right one in the socket, you're set. At 4 ounces, it's a straightforward, no-frills reloading component that does one job and does it well.
| Brand | RCBS |
| Model | 9202 |
| Type | Single Stage Shell Holder |
| Designation | #2 Multi-Caliber |
| Material | Hardened Steel |
| Weight | 4 oz |
| Case Head Capture | 0.125 inch |
The #2 designation indicates this holder is sized for a specific range of case head diameters. Consult RCBS compatibility charts or your press manual to confirm which cartridges fit the #2 holder—different caliber families require different holders.
Yes. The RCBS 9202 is designed for single-stage and turret presses. Insert it into the ram of your press to secure and align your case during the reloading stroke.
That 0.125 inch of case head contact is the SAAMI standard for proper headspacing and case alignment. It positions the cartridge at the correct depth so the die performs consistently and safely.
Shell holders are standardized components, so the #2 should fit most single-stage and turret presses that use RCBS-style shell holder sockets. Verify your new press uses the same socket design before assuming compatibility.
SKU: 115668399 • Width: 2in • Height: 0.5in • Depth: 6in • Weight: 0.04oz
Availability: In Stock
The RCBS 9202 Single Stage Shell Holder #2 is a hardened steel component built to anchor your cartridge cases during the reloading process. If you're running a single-stage or turret press and need consistent case alignment with your dies, this holder ensures your cases sit at the correct headspace every time you pull the handle. It's sized to accommodate specific case head dimensions and captures 0.125 inch of the case head—the engineering that keeps your reloads safe and repeatable.
Shell holders are one of those often-overlooked details that separate solid reloading from sloppy reloading. The right holder for your caliber means zero case wandering, better concentricity, and dies that wear evenly. This is hardened steel, not stamped tin, so it'll outlast your press if you treat it right.
The #2 designation tells you which case families this holder accommodates—that specificity matters. If you're loading multiple calibers, you'll likely need different holders for different cartridge head sizes, but once you've got the right one in the socket, you're set. At 4 ounces, it's a straightforward, no-frills reloading component that does one job and does it well.
| Brand | RCBS |
| Model | 9202 |
| Type | Single Stage Shell Holder |
| Designation | #2 Multi-Caliber |
| Material | Hardened Steel |
| Weight | 4 oz |
| Case Head Capture | 0.125 inch |
The #2 designation indicates this holder is sized for a specific range of case head diameters. Consult RCBS compatibility charts or your press manual to confirm which cartridges fit the #2 holder—different caliber families require different holders.
Yes. The RCBS 9202 is designed for single-stage and turret presses. Insert it into the ram of your press to secure and align your case during the reloading stroke.
That 0.125 inch of case head contact is the SAAMI standard for proper headspacing and case alignment. It positions the cartridge at the correct depth so the die performs consistently and safely.
Shell holders are standardized components, so the #2 should fit most single-stage and turret presses that use RCBS-style shell holder sockets. Verify your new press uses the same socket design before assuming compatibility.
SKU: 115668399 • Width: 2in • Height: 0.5in • Depth: 6in • Weight: 0.04oz