$10.31
Loading...
Loading...
Loading...
Availability: In Stock
The RCBS 9208 single stage shell holder is a precision reloading component built to keep .45 Automatic Rimmed cases properly centered in your press during the full reloading cycle. Whether you're loading for a vintage semiauto or specialty rimmed cartridge, this hardened steel holder ensures consistent case alignment with your dies—critical for safe, uniform ammunition. It's sized specifically for .45 Automatic Rimmed case heads and works in RCBS single-stage and turret presses.
Reloading accuracy starts with repeatability, and a quality shell holder is where that begins. The 9208 captures precisely 0.125 inch of the case head to maintain proper SAAMI headspacing geometry across every round you load. That consistency translates directly to better primer seating, cleaner case feeding, and more predictable performance at the range or in the field.
If you're running a single-stage or turret press and working with .45 Automatic Rimmed, this is the right holder for your setup. RCBS shell holders are a simple, unglamorous part of reloading—but they're one of the most important. Worn or mismatched holders introduce variables you don't want; a dedicated, properly sized holder keeps your process tight.
| Model | RCBS 9208 |
| Type | Single Stage Shell Holder |
| Cartridge | .45 Automatic Rimmed |
| Material | Hardened Steel |
| Case Head Capture Depth | 0.125 inch |
| Compatible Press Types | Single-stage and turret presses |
Yes. The RCBS 9208 is designed for use in RCBS single-stage and turret presses. It will not work with progressive presses.
This is the #8 shell holder, sized specifically for .45 Automatic Rimmed cases. It captures the correct amount of case head to maintain proper SAAMI headspacing for this cartridge.
The 0.125 inch capture depth ensures your case is positioned at the correct height relative to the die, which is essential for consistent primer seating depth, proper bullet seating, and safe reloading. Incorrect headspacing can lead to uneven performance across your ammunition lot.
No. Shell holders are cartridge-specific and sized to fit the exact case head dimensions of a particular round. Always use the holder designed for your specific caliber.
SKU: 115767396 • Width: 2in • Height: 0.5in • Depth: 6in • Weight: 0.03oz
Availability: In Stock
The RCBS 9208 single stage shell holder is a precision reloading component built to keep .45 Automatic Rimmed cases properly centered in your press during the full reloading cycle. Whether you're loading for a vintage semiauto or specialty rimmed cartridge, this hardened steel holder ensures consistent case alignment with your dies—critical for safe, uniform ammunition. It's sized specifically for .45 Automatic Rimmed case heads and works in RCBS single-stage and turret presses.
Reloading accuracy starts with repeatability, and a quality shell holder is where that begins. The 9208 captures precisely 0.125 inch of the case head to maintain proper SAAMI headspacing geometry across every round you load. That consistency translates directly to better primer seating, cleaner case feeding, and more predictable performance at the range or in the field.
If you're running a single-stage or turret press and working with .45 Automatic Rimmed, this is the right holder for your setup. RCBS shell holders are a simple, unglamorous part of reloading—but they're one of the most important. Worn or mismatched holders introduce variables you don't want; a dedicated, properly sized holder keeps your process tight.
| Model | RCBS 9208 |
| Type | Single Stage Shell Holder |
| Cartridge | .45 Automatic Rimmed |
| Material | Hardened Steel |
| Case Head Capture Depth | 0.125 inch |
| Compatible Press Types | Single-stage and turret presses |
Yes. The RCBS 9208 is designed for use in RCBS single-stage and turret presses. It will not work with progressive presses.
This is the #8 shell holder, sized specifically for .45 Automatic Rimmed cases. It captures the correct amount of case head to maintain proper SAAMI headspacing for this cartridge.
The 0.125 inch capture depth ensures your case is positioned at the correct height relative to the die, which is essential for consistent primer seating depth, proper bullet seating, and safe reloading. Incorrect headspacing can lead to uneven performance across your ammunition lot.
No. Shell holders are cartridge-specific and sized to fit the exact case head dimensions of a particular round. Always use the holder designed for your specific caliber.
SKU: 115767396 • Width: 2in • Height: 0.5in • Depth: 6in • Weight: 0.03oz
