Availability: In Stock
The RCBS 32901 full-length 2-die set for 6.5 Creedmoor gives you the core tools you need to reload rifle ammunition. This is a straightforward, proven setup: a full-length sizing die and a bullet seater die, both engineered to handle the 6.5 Creedmoor cartridge. Whether you're building match ammo for a precision rifle, reloading for hunting, or stocking ammunition for the range, a quality full-length die set is where most reloaders—especially newcomers—should start. RCBS dies are built to last; many shooters run the same set through multiple barrels or a whole rifle's lifespan.
The full-length sizing die does the heavy lifting: it bumps the case shoulder to your adjusted length, sizes the case body so it chambers cleanly, and decaps the spent primer. The expander ball inside the die sizes the neck to the correct tension for your bullets. You'll need to lube your cases before running them through the sizing die—that's standard practice. The seater die handles bullet seating and includes a crimp ring if you want to crimp the case mouth to the bullet. By adjusting the die height in your press, you can easily toggle between seating and crimping, or skip the crimp altogether.
This is a no-frills, versatile setup that works for 6.5 Creedmoor loads across the board. Before you start, grab a cartridge headspace gage tool so you can dial in the correct shoulder bump on your sizing die—it takes a few minutes and ensures consistent, safe ammunition. Once you've got your dies set up right, you're ready to load round after round with confidence.
| Brand | RCBS |
| Product Number | 32901 |
| Cartridge | 6.5 Creedmoor |
| Die Type | Full-length 2-die set (sizing and seating) |
| Case Type | Bottleneck rifle |
Yes. Cases must be lubricated before full-length sizing to prevent sticking and ensure smooth operation through the die.
Yes. The full-length sizing die resizes the entire case body and shoulder, so it works with new brass and fired cases alike. This makes it ideal if you're working with mixed brass or consolidating ammunition from different sources.
The seater die has a built-in crimp ring. You can crimp or skip crimping by adjusting the die height in your press—no separate die needed.
This die set is the foundation. You'll also need a reloading press, a scale, calipers, brass, primers, powder, and bullets. Many reloaders also invest in a cartridge headspace gage tool to dial in precise shoulder bump on the sizing die.
SKU: 115675914 • Width: 4.5in • Height: 1.8in • Depth: 5.9in • Weight: 1.25oz
Availability: In Stock
The RCBS 32901 full-length 2-die set for 6.5 Creedmoor gives you the core tools you need to reload rifle ammunition. This is a straightforward, proven setup: a full-length sizing die and a bullet seater die, both engineered to handle the 6.5 Creedmoor cartridge. Whether you're building match ammo for a precision rifle, reloading for hunting, or stocking ammunition for the range, a quality full-length die set is where most reloaders—especially newcomers—should start. RCBS dies are built to last; many shooters run the same set through multiple barrels or a whole rifle's lifespan.
The full-length sizing die does the heavy lifting: it bumps the case shoulder to your adjusted length, sizes the case body so it chambers cleanly, and decaps the spent primer. The expander ball inside the die sizes the neck to the correct tension for your bullets. You'll need to lube your cases before running them through the sizing die—that's standard practice. The seater die handles bullet seating and includes a crimp ring if you want to crimp the case mouth to the bullet. By adjusting the die height in your press, you can easily toggle between seating and crimping, or skip the crimp altogether.
This is a no-frills, versatile setup that works for 6.5 Creedmoor loads across the board. Before you start, grab a cartridge headspace gage tool so you can dial in the correct shoulder bump on your sizing die—it takes a few minutes and ensures consistent, safe ammunition. Once you've got your dies set up right, you're ready to load round after round with confidence.
| Brand | RCBS |
| Product Number | 32901 |
| Cartridge | 6.5 Creedmoor |
| Die Type | Full-length 2-die set (sizing and seating) |
| Case Type | Bottleneck rifle |
Yes. Cases must be lubricated before full-length sizing to prevent sticking and ensure smooth operation through the die.
Yes. The full-length sizing die resizes the entire case body and shoulder, so it works with new brass and fired cases alike. This makes it ideal if you're working with mixed brass or consolidating ammunition from different sources.
The seater die has a built-in crimp ring. You can crimp or skip crimping by adjusting the die height in your press—no separate die needed.
This die set is the foundation. You'll also need a reloading press, a scale, calipers, brass, primers, powder, and bullets. Many reloaders also invest in a cartridge headspace gage tool to dial in precise shoulder bump on the sizing die.
SKU: 115675914 • Width: 4.5in • Height: 1.8in • Depth: 5.9in • Weight: 1.25oz