RCBS115661531
RCBS Full Length Die Set for 300 RCM Reloading$55.16
Availability: In Stock
The RCBS 7.62x54mm Russian full length reloading die set gives you the two-die foundation you need to reload for one of the most common Soviet-era rifle cartridges. Whether you're working up loads for a Mosin-Nagant, SVT, or any other rifle chambered in 7.62×54R, a full length die set handles the core operations: resizing the case body and neck, decapping the spent primer, and seating a fresh bullet with optional crimping. Full length sizing is the standard choice for most reloaders and ensures your fired brass chambers cleanly in the next firing.
The full length sizing die bumps the shoulder back to spec—you control how much by adjusting the die height in the press—and sizes the case body so it fits your rifle's chamber reliably. An expander ball sizes the neck to the correct inside diameter for bullet tension. The seater die seats bullets straight and true, and includes a crimp ring you can engage or bypass by raising or lowering the die in the press. Both dies work with standard RCBS reloading equipment and are built to handle the rigors of high-volume reloading for years.
If you're new to reloading 7.62×54R, a full length die set is the logical place to start. You'll learn proper setup on familiar, forgiving equipment, and the set will outlast multiple barrel replacements. One important reminder: always lubricate cases before full length sizing to prevent stuck cases and damage to your dies.
| Cartridge | 7.62×54mm Russian |
| Die Type | Full Length Rifle |
| Number of Dies | 2 |
| Dies Included | Full Length Sizing Die, Bullet Seating Die |
| Seating Die Features | Built-in Crimp Ring |
| Brand | RCBS |
This RCBS full length die set is compatible with standard RCBS reloading presses and any press that accepts standard 7/8-inch-14 threaded dies, which covers most bench presses used by rifle reloaders.
You get two dies: a full length sizing die that decaps and sizes the case body and neck, and a bullet seating die with an integral crimp ring that you can use or skip depending on your preference and your rifle's chamber.
Yes. Always lubricate your cases before running them through the full length sizing die to prevent the case from sticking in the die and to protect both the die and your brass.
Full length die sets are the standard choice for reloaders starting out with 7.62×54R. Once you master the basics—proper setup, case preparation, and adjustment—you'll have a reliable system that can reload thousands of rounds over the life of your rifle.
SKU: 115797287 • Weight: 1.3oz
Availability: In Stock
The RCBS 7.62x54mm Russian full length reloading die set gives you the two-die foundation you need to reload for one of the most common Soviet-era rifle cartridges. Whether you're working up loads for a Mosin-Nagant, SVT, or any other rifle chambered in 7.62×54R, a full length die set handles the core operations: resizing the case body and neck, decapping the spent primer, and seating a fresh bullet with optional crimping. Full length sizing is the standard choice for most reloaders and ensures your fired brass chambers cleanly in the next firing.
The full length sizing die bumps the shoulder back to spec—you control how much by adjusting the die height in the press—and sizes the case body so it fits your rifle's chamber reliably. An expander ball sizes the neck to the correct inside diameter for bullet tension. The seater die seats bullets straight and true, and includes a crimp ring you can engage or bypass by raising or lowering the die in the press. Both dies work with standard RCBS reloading equipment and are built to handle the rigors of high-volume reloading for years.
If you're new to reloading 7.62×54R, a full length die set is the logical place to start. You'll learn proper setup on familiar, forgiving equipment, and the set will outlast multiple barrel replacements. One important reminder: always lubricate cases before full length sizing to prevent stuck cases and damage to your dies.
| Cartridge | 7.62×54mm Russian |
| Die Type | Full Length Rifle |
| Number of Dies | 2 |
| Dies Included | Full Length Sizing Die, Bullet Seating Die |
| Seating Die Features | Built-in Crimp Ring |
| Brand | RCBS |
This RCBS full length die set is compatible with standard RCBS reloading presses and any press that accepts standard 7/8-inch-14 threaded dies, which covers most bench presses used by rifle reloaders.
You get two dies: a full length sizing die that decaps and sizes the case body and neck, and a bullet seating die with an integral crimp ring that you can use or skip depending on your preference and your rifle's chamber.
Yes. Always lubricate your cases before running them through the full length sizing die to prevent the case from sticking in the die and to protect both the die and your brass.
Full length die sets are the standard choice for reloaders starting out with 7.62×54R. Once you master the basics—proper setup, case preparation, and adjustment—you'll have a reliable system that can reload thousands of rounds over the life of your rifle.
SKU: 115797287 • Weight: 1.3oz