RCBS167522181
Rcbs 1-1/2 Inch-12 Bullet Puller - Collet .50 Bmg$80.86
Loading...
Loading...
Loading...
Availability: In Stock
The RCBS 1-1/2 Inch-12 Bullet Puller with .416 Barrett collet is a reloader's workhorse for safely extracting jacketed bullets from fired brass without damage. Whether you're sorting through mixed brass, salvaging components from misloads, or recovering bullets from once-fired ammunition, this collet-style puller handles the job cleanly. It's a practical investment for any reloader who wants to maximize component life and keep costs down on expensive magnum cartridges like the .416 Barrett.
The design is straightforward and reliable: the collet chucks the bullet securely while the puller head threads into your single-stage press using standard 7/8-inch-14 threads—the same connection you use for your dies, so setup is familiar. Load your cartridge in the press, tighten the collet around the bullet's ogive, and pull the ram upward to extract it. The collet pulls directly from the case mouth, minimizing risk to both brass and projectile. The newly redesigned collet mechanism improves ease of use compared to older models.
This specific .416 Barrett collet is caliber-specific, so accuracy of fit is exact for your magnum applications. RCBS has engineered collet-style pullers to work across their full line of reloading presses, making this a compatible addition to your bench whether you're running a green press or an older model.
| Thread Size | 7/8-inch-14 |
| Puller Type | Collet |
| Caliber | .416 Barrett |
| Overall Length | 1-1/2 inches |
| Brand | RCBS |
The RCBS collet puller uses standard 7/8-inch-14 threads, making it compatible with most single-stage reloading presses that accept standard dies.
No. This collet is specifically designed for .416 Barrett cartridges. You'll need the appropriate caliber-specific collet for other chamberings.
The collet design is engineered to extract bullets cleanly without crushing the projectile or marring the case mouth, allowing you to reuse both components.
Insert your cartridge in the press, position the puller head, tighten the collet around the bullet, then pull the press ram upward to extract the bullet from the case.
SKU: 167524856 • Width: 1.95in • Height: 1in • Depth: 3.2in • Weight: 0.1875oz
Availability: In Stock
The RCBS 1-1/2 Inch-12 Bullet Puller with .416 Barrett collet is a reloader's workhorse for safely extracting jacketed bullets from fired brass without damage. Whether you're sorting through mixed brass, salvaging components from misloads, or recovering bullets from once-fired ammunition, this collet-style puller handles the job cleanly. It's a practical investment for any reloader who wants to maximize component life and keep costs down on expensive magnum cartridges like the .416 Barrett.
The design is straightforward and reliable: the collet chucks the bullet securely while the puller head threads into your single-stage press using standard 7/8-inch-14 threads—the same connection you use for your dies, so setup is familiar. Load your cartridge in the press, tighten the collet around the bullet's ogive, and pull the ram upward to extract it. The collet pulls directly from the case mouth, minimizing risk to both brass and projectile. The newly redesigned collet mechanism improves ease of use compared to older models.
This specific .416 Barrett collet is caliber-specific, so accuracy of fit is exact for your magnum applications. RCBS has engineered collet-style pullers to work across their full line of reloading presses, making this a compatible addition to your bench whether you're running a green press or an older model.
| Thread Size | 7/8-inch-14 |
| Puller Type | Collet |
| Caliber | .416 Barrett |
| Overall Length | 1-1/2 inches |
| Brand | RCBS |
The RCBS collet puller uses standard 7/8-inch-14 threads, making it compatible with most single-stage reloading presses that accept standard dies.
No. This collet is specifically designed for .416 Barrett cartridges. You'll need the appropriate caliber-specific collet for other chamberings.
The collet design is engineered to extract bullets cleanly without crushing the projectile or marring the case mouth, allowing you to reuse both components.
Insert your cartridge in the press, position the puller head, tighten the collet around the bullet, then pull the press ram upward to extract the bullet from the case.
SKU: 167524856 • Width: 1.95in • Height: 1in • Depth: 3.2in • Weight: 0.1875oz