$208.95
Availability: In Stock
The Magpul MAG1207-ODG Hunter American Stock is a purpose-built replacement stock for the Ruger American short action rifle in OD Green. If you're running a Ruger American Predator or Ranch model and want to move beyond the factory plastic, this adjustable synthetic stock delivers the ergonomic control and modularity that serious hunters and shooters demand — without requiring any gunsmithing to install.
Built on a reinforced polymer body paired with a Type III hard-anodized aluminum bedding block and steel recoil lugs, this stock handles the recoil and precision demands of bolt-action hunting and target shooting. The fully adjustable length of pull ranges from 13 to 15 inches, so whether you're shooting in heavy winter gear or a t-shirt, you can dial in a stock position that fits your frame and your shooting style. The stock ships with a 0.25-inch cheek riser already installed, and Magpul offers optional 0.00, 0.50, and 0.75-inch risers separately, letting you fine-tune your cheek weld for scope alignment and comfort.
M-LOK slots on the forend sides and bottom open up your options for sling mounts, bipod attachments, and other tactical accessories. The rear QD swivel point accepts optional Magpul sling mount kits for quick disconnect sling setup. Most important: the Hunter American ships with Magpul's STANAG Bolt Action Magazine Well included, so you get reliable detachable box magazine compatibility right out of the box — no additional purchase needed.
Made in the USA, the Hunter American Stock transforms a stock Ruger American into a rifle that handles the way you shoot.
| Brand | Magpul |
| Product Name | Hunter American Stock |
| Color | OD Green |
| Compatibility | Ruger American Short Action, Right Hand |
| Stock Construction | Reinforced polymer with Type III hard-anodized aluminum bedding block |
| Recoil Lugs | High strength steel |
| Length of Pull Range | 13 to 15 inches |
| Cheek Riser (Pre-installed) | 0.25 inches |
| Optional Cheek Risers | 0.00, 0.50, 0.75 inches |
| Accessory Mounting | M-LOK slots on forend sides and bottom |
| Sling Attachment | Rear QD swivel point; optional sling mount kits available |
| Magazine Well | STANAG Bolt Action Magazine Well (MAG1208) included |
| Installation | Drop-in; no gunsmithing required |
| Manufacture | USA |
This stock is designed for the Ruger American short action in right-hand configuration. It fits models like the Predator and Ranch that use AR magazine-compatible stocks. Confirm your rifle's action length and handedness before ordering.
No. The Hunter American Stock is a drop-in replacement that requires no gunsmithing. Installation is straightforward and can be done with basic tools.
The Magpul STANAG Bolt Action Magazine Well (MAG1208) is included. It provides reliable detachable box magazine compatibility for your Ruger American.
Yes. The length of pull is fully adjustable from 13 to 15 inches using the included 0.50-inch spacers. The stock ships with a 0.25-inch cheek riser pre-installed, and optional risers of 0.00, 0.50, and 0.75 inches are available separately for cheek weld tuning.
SKU: 115646609 • Width: 8.1in • Height: 7in • Depth: 37in • Weight: 4.84oz
Availability: In Stock
The Magpul MAG1207-ODG Hunter American Stock is a purpose-built replacement stock for the Ruger American short action rifle in OD Green. If you're running a Ruger American Predator or Ranch model and want to move beyond the factory plastic, this adjustable synthetic stock delivers the ergonomic control and modularity that serious hunters and shooters demand — without requiring any gunsmithing to install.
Built on a reinforced polymer body paired with a Type III hard-anodized aluminum bedding block and steel recoil lugs, this stock handles the recoil and precision demands of bolt-action hunting and target shooting. The fully adjustable length of pull ranges from 13 to 15 inches, so whether you're shooting in heavy winter gear or a t-shirt, you can dial in a stock position that fits your frame and your shooting style. The stock ships with a 0.25-inch cheek riser already installed, and Magpul offers optional 0.00, 0.50, and 0.75-inch risers separately, letting you fine-tune your cheek weld for scope alignment and comfort.
M-LOK slots on the forend sides and bottom open up your options for sling mounts, bipod attachments, and other tactical accessories. The rear QD swivel point accepts optional Magpul sling mount kits for quick disconnect sling setup. Most important: the Hunter American ships with Magpul's STANAG Bolt Action Magazine Well included, so you get reliable detachable box magazine compatibility right out of the box — no additional purchase needed.
Made in the USA, the Hunter American Stock transforms a stock Ruger American into a rifle that handles the way you shoot.
| Brand | Magpul |
| Product Name | Hunter American Stock |
| Color | OD Green |
| Compatibility | Ruger American Short Action, Right Hand |
| Stock Construction | Reinforced polymer with Type III hard-anodized aluminum bedding block |
| Recoil Lugs | High strength steel |
| Length of Pull Range | 13 to 15 inches |
| Cheek Riser (Pre-installed) | 0.25 inches |
| Optional Cheek Risers | 0.00, 0.50, 0.75 inches |
| Accessory Mounting | M-LOK slots on forend sides and bottom |
| Sling Attachment | Rear QD swivel point; optional sling mount kits available |
| Magazine Well | STANAG Bolt Action Magazine Well (MAG1208) included |
| Installation | Drop-in; no gunsmithing required |
| Manufacture | USA |
This stock is designed for the Ruger American short action in right-hand configuration. It fits models like the Predator and Ranch that use AR magazine-compatible stocks. Confirm your rifle's action length and handedness before ordering.
No. The Hunter American Stock is a drop-in replacement that requires no gunsmithing. Installation is straightforward and can be done with basic tools.
The Magpul STANAG Bolt Action Magazine Well (MAG1208) is included. It provides reliable detachable box magazine compatibility for your Ruger American.
Yes. The length of pull is fully adjustable from 13 to 15 inches using the included 0.50-inch spacers. The stock ships with a 0.25-inch cheek riser pre-installed, and optional risers of 0.00, 0.50, and 0.75 inches are available separately for cheek weld tuning.
SKU: 115646609 • Width: 8.1in • Height: 7in • Depth: 37in • Weight: 4.84oz