AeroPrecision167528121
M4E1 300Blk Assembled Upper 16''Bbl Threaded W/Rm15'' Hg Fde$534.99
Availability: In Stock
Current Stock: Out of stock
The Aero Precision M4E1 .300 Blackout assembled upper with 8-inch barrel is a complete, ready-to-run upper receiver built for short-range combat, home defense, and suppressed shooting. This isn't a bare receiver—it ships fully assembled with a 4150 Chrome Moly Vanadium barrel, low-profile gas block, and Aero's ATLAS R-ONE handguard, so you're only missing a bolt carrier group and charging handle to have a functioning upper. The 8-inch barrel length is ideal for .300 Blackout's subsonic versatility, especially in shorter platforms where maneuverability matters and a can is part of your setup.
The ATLAS R-ONE handguard is Aero's answer to keeping weight and profile slim without sacrificing attachment real estate or strength. It uses Aero's proprietary ATLAS mounting system—a proven quick-disconnect platform that plays well with accessories while staying rock-solid. The handguard sports full-length picatinny on top and QD sling points at 3, 6, and 9 o'clock, so you can configure it however your mission demands. The low-profile gas block fits under the R-ONE without compromises, keeping the whole package lean.
The barrel itself is where the precision lives. Aero's 4150 CMV steel is treated with a QPQ finish inside and out—corrosion-resistant and durable through real use and storage. The 1-in-7 twist handles modern .300 Blackout loads across the spectrum, from subsonic heavyweight pills to faster rounds. The muzzle is threaded 5/8x24, standard for .300 Blackout suppressors and brakes. Note that this upper comes with an A2 flash hider, but it's not pinned or welded, so you're free to add your can or other muzzle device. The upper receiver itself features M4 feedramps, M4E1's enhanced forging for a modern look, picatinny that blends with Aero's handguards, .250 takedown pin holes, and comes with port door and forward assist already installed.
This is a no-nonsense upper for shooters who want a quality mid-length build without piecing together parts individually. Whether you're running it on an SBR for home defense or fitting it to an existing lower for a dedicated .300 Blackout carbine, Aero's quality and attention to detail come through in every detail.
| Product | M4E1 Assembled Upper Receiver, .300 Blackout |
| Barrel Length | 8 inches |
| Barrel Caliber | .300 Blackout |
| Barrel Material | 4150 Chrome Moly Vanadium |
| Barrel Finish | QPQ corrosion resistant |
| Twist Rate | 1 in 7 |
| Barrel Weight | 18 oz |
| Muzzle Threading | 5/8x24 |
| Included Muzzle Device | Standard A2 Flash Hider (not pinned/welded) |
| Gas System | Pistol length |
| Gas Block | Low-profile |
| Gas Port Size | .109 inches |
| Handguard | ATLAS R-ONE |
| Handguard ID | 1.3 inches |
| Handguard OD | 1.5 inches |
| Top Rail | Full-length Picatinny |
| Sling Attachment | QD socket at 3, 6, and 9 o'clock |
| Upper Receiver | M4E1 with M4 feedramps and .250 takedown pin holes |
| Included Components | Upper receiver, ATLAS R-ONE handguard, barrel, low-profile gas block, port door, forward assist, A2 flash hider |
| Not Included | Bolt carrier group, charging handle |
| Color | FDE (Flat Dark Earth) |
No—this is a complete upper receiver assembly, but you'll need to add a bolt carrier group and charging handle to make it functional. Once you install those two components on a compatible lower receiver, you'll have a complete rifle.
Yes. The barrel is threaded 5/8x24, which is the standard muzzle thread for .300 Blackout suppressors. The A2 flash hider included is not pinned or welded, so you can easily remove it and install a suppressor. The low-profile gas block also works cleanly with suppressed setups.
The barrel has a 1-in-7 twist rate, which is the standard for .300 Blackout. This twist stabilizes both subsonic and supersonic .300 Blackout ammunition, making it versatile for suppressed shooting, hunting, and range use.
This upper is compatible with mil-spec AR-15 lower receivers. The .250 takedown pin holes match standard spec, so assembly is straightforward. Just ensure your lower is rated for .300 Blackout if you plan to use subsonic or supersonic loads.
SKU: 167528120 • Weight: 4oz
Availability: In Stock
Current Stock: Out of stock
The Aero Precision M4E1 .300 Blackout assembled upper with 8-inch barrel is a complete, ready-to-run upper receiver built for short-range combat, home defense, and suppressed shooting. This isn't a bare receiver—it ships fully assembled with a 4150 Chrome Moly Vanadium barrel, low-profile gas block, and Aero's ATLAS R-ONE handguard, so you're only missing a bolt carrier group and charging handle to have a functioning upper. The 8-inch barrel length is ideal for .300 Blackout's subsonic versatility, especially in shorter platforms where maneuverability matters and a can is part of your setup.
The ATLAS R-ONE handguard is Aero's answer to keeping weight and profile slim without sacrificing attachment real estate or strength. It uses Aero's proprietary ATLAS mounting system—a proven quick-disconnect platform that plays well with accessories while staying rock-solid. The handguard sports full-length picatinny on top and QD sling points at 3, 6, and 9 o'clock, so you can configure it however your mission demands. The low-profile gas block fits under the R-ONE without compromises, keeping the whole package lean.
The barrel itself is where the precision lives. Aero's 4150 CMV steel is treated with a QPQ finish inside and out—corrosion-resistant and durable through real use and storage. The 1-in-7 twist handles modern .300 Blackout loads across the spectrum, from subsonic heavyweight pills to faster rounds. The muzzle is threaded 5/8x24, standard for .300 Blackout suppressors and brakes. Note that this upper comes with an A2 flash hider, but it's not pinned or welded, so you're free to add your can or other muzzle device. The upper receiver itself features M4 feedramps, M4E1's enhanced forging for a modern look, picatinny that blends with Aero's handguards, .250 takedown pin holes, and comes with port door and forward assist already installed.
This is a no-nonsense upper for shooters who want a quality mid-length build without piecing together parts individually. Whether you're running it on an SBR for home defense or fitting it to an existing lower for a dedicated .300 Blackout carbine, Aero's quality and attention to detail come through in every detail.
| Product | M4E1 Assembled Upper Receiver, .300 Blackout |
| Barrel Length | 8 inches |
| Barrel Caliber | .300 Blackout |
| Barrel Material | 4150 Chrome Moly Vanadium |
| Barrel Finish | QPQ corrosion resistant |
| Twist Rate | 1 in 7 |
| Barrel Weight | 18 oz |
| Muzzle Threading | 5/8x24 |
| Included Muzzle Device | Standard A2 Flash Hider (not pinned/welded) |
| Gas System | Pistol length |
| Gas Block | Low-profile |
| Gas Port Size | .109 inches |
| Handguard | ATLAS R-ONE |
| Handguard ID | 1.3 inches |
| Handguard OD | 1.5 inches |
| Top Rail | Full-length Picatinny |
| Sling Attachment | QD socket at 3, 6, and 9 o'clock |
| Upper Receiver | M4E1 with M4 feedramps and .250 takedown pin holes |
| Included Components | Upper receiver, ATLAS R-ONE handguard, barrel, low-profile gas block, port door, forward assist, A2 flash hider |
| Not Included | Bolt carrier group, charging handle |
| Color | FDE (Flat Dark Earth) |
No—this is a complete upper receiver assembly, but you'll need to add a bolt carrier group and charging handle to make it functional. Once you install those two components on a compatible lower receiver, you'll have a complete rifle.
Yes. The barrel is threaded 5/8x24, which is the standard muzzle thread for .300 Blackout suppressors. The A2 flash hider included is not pinned or welded, so you can easily remove it and install a suppressor. The low-profile gas block also works cleanly with suppressed setups.
The barrel has a 1-in-7 twist rate, which is the standard for .300 Blackout. This twist stabilizes both subsonic and supersonic .300 Blackout ammunition, making it versatile for suppressed shooting, hunting, and range use.
This upper is compatible with mil-spec AR-15 lower receivers. The .250 takedown pin holes match standard spec, so assembly is straightforward. Just ensure your lower is rated for .300 Blackout if you plan to use subsonic or supersonic loads.
SKU: 167528120 • Weight: 4oz