$164.46
Availability: In Stock
Current Stock: Out of stock
The Lyman Case Trim Xpress 220 Volt Trimmer is a dedicated electric case trimmer built for rifle reloaders who want speed and consistency without jury-rigging a power drill to a bench-mounted tool. Unlike manual trimmers or drill-powered setups, the Case Trim Xpress has its own integrated motor with variable speed control and a carbide cutter designed to handle the precision work that accurate ammunition demands. If you're trimming rifle brass regularly—whether you're loading for hunting, competition, or precision range work—this tool cuts the tedium and delivers repeatable results.
The trimmer uses a spring-loaded bushing system that references the case shoulder of bottleneck cartridges to center and support each round while the carbide cutter does the work. No separate pilots or adapters needed; just drop in the appropriate bushing from the included set of 10 (covering most popular bottleneck rifle cases), push the case forward, and the spring mechanism handles the rest. You'll trim roughly 15 cases per minute with clean, chatter-free cuts—a pace that makes batch reloading far less tedious. The adjustment wheel lets you dial in case length to 0.001-inch precision, so once you set it for your cartridge, consistency is locked in.
The compact, low-profile footprint means it doesn't dominate your reloading bench, and the 220-volt electric supply eliminates the need to source or maintain a separate motor. This is a working reloader's tool: straightforward, reliable, and built to simplify one of the most repetitive steps in the handloading process.
| Power Supply | 220 Volt electric |
| Motor Type | Variable speed |
| Cutter Material | Carbide |
| Trimming Rate | Approximately 15 cases per minute |
| Adjustment Increments | 0.001 inch |
| Included Bushings | 10 (for bottleneck rifle cases) |
| Compatible Cases | Bottleneck rifle cartridges (not for straight-wall cases) |
| Design | Compact, low-profile housing |
The Case Trim Xpress is designed for bottleneck rifle cartridges and uses bushings that reference the case shoulder to center the round. The 10 included bushings fit most popular bottleneck rifle cases. It is not suitable for straight-wall cases.
No. The spring-loaded bushing system handles centering and support directly; you don't need separate pilots or adapters. Select the correct bushing for your cartridge, insert it, and you're ready to trim.
The trimmer comes with a set of 10 bushings designed to fit most popular bottleneck rifle cartridges. The 220-volt motor is integrated into the unit.
Yes. The adjustment wheel allows you to dial in case length to 0.001-inch increments, so once you set it for your cartridge, every case will trim to that length consistently.
SKU: 167526162 • Width: 5.7in • Height: 4.7in • Depth: 8.75in • Weight: 3.9oz
Availability: In Stock
Current Stock: Out of stock
The Lyman Case Trim Xpress 220 Volt Trimmer is a dedicated electric case trimmer built for rifle reloaders who want speed and consistency without jury-rigging a power drill to a bench-mounted tool. Unlike manual trimmers or drill-powered setups, the Case Trim Xpress has its own integrated motor with variable speed control and a carbide cutter designed to handle the precision work that accurate ammunition demands. If you're trimming rifle brass regularly—whether you're loading for hunting, competition, or precision range work—this tool cuts the tedium and delivers repeatable results.
The trimmer uses a spring-loaded bushing system that references the case shoulder of bottleneck cartridges to center and support each round while the carbide cutter does the work. No separate pilots or adapters needed; just drop in the appropriate bushing from the included set of 10 (covering most popular bottleneck rifle cases), push the case forward, and the spring mechanism handles the rest. You'll trim roughly 15 cases per minute with clean, chatter-free cuts—a pace that makes batch reloading far less tedious. The adjustment wheel lets you dial in case length to 0.001-inch precision, so once you set it for your cartridge, consistency is locked in.
The compact, low-profile footprint means it doesn't dominate your reloading bench, and the 220-volt electric supply eliminates the need to source or maintain a separate motor. This is a working reloader's tool: straightforward, reliable, and built to simplify one of the most repetitive steps in the handloading process.
| Power Supply | 220 Volt electric |
| Motor Type | Variable speed |
| Cutter Material | Carbide |
| Trimming Rate | Approximately 15 cases per minute |
| Adjustment Increments | 0.001 inch |
| Included Bushings | 10 (for bottleneck rifle cases) |
| Compatible Cases | Bottleneck rifle cartridges (not for straight-wall cases) |
| Design | Compact, low-profile housing |
The Case Trim Xpress is designed for bottleneck rifle cartridges and uses bushings that reference the case shoulder to center the round. The 10 included bushings fit most popular bottleneck rifle cases. It is not suitable for straight-wall cases.
No. The spring-loaded bushing system handles centering and support directly; you don't need separate pilots or adapters. Select the correct bushing for your cartridge, insert it, and you're ready to trim.
The trimmer comes with a set of 10 bushings designed to fit most popular bottleneck rifle cartridges. The 220-volt motor is integrated into the unit.
Yes. The adjustment wheel allows you to dial in case length to 0.001-inch increments, so once you set it for your cartridge, every case will trim to that length consistently.
SKU: 167526162 • Width: 5.7in • Height: 4.7in • Depth: 8.75in • Weight: 3.9oz
