Lyman167526162
Lyman Case Trim Xpress 220 Volt Trimmer$172.61
Loading...
Loading...
Loading...
Availability: In Stock
The Lyman Brass Smith Case Trim Xpress is a dedicated electric case trimmer built for rifle reloaders who demand speed and consistency without the hassle of rigging up a drill press or hunting for a separate motor. Unlike bench-mounted systems that eat up real estate or handheld approaches that demand muscle and patience, this machine handles case trimming at roughly 15 cases per minute with a variable-speed motor and a carbide cutter that stays sharp through thousands of cuts. It's purpose-built for bottleneck rifle cartridges and comes ready to work with a set of 10 bushings that fit the most common calibers.
The Xpress trimmer uses spring-loaded bushings that contact the shoulder of bottleneck cases, centering them against the cutter with no loose pilots to fuss with. That shoulder-contact design means you get repeatable, chatter-free trims every time—critical when you're matching case lengths to .001" tolerance. An adjustment wheel lets you dial in your exact trim length, so switching between different cartridges or matching a tight specification is straightforward. The compact, low-profile housing fits into cramped reload benches without dominating the workspace.
If you're trimming volume or just tired of hand-trimming brass, the Xpress brings consistency and speed to a tedious reloading step. The built-in 115V motor means you plug it in and go—no auxiliary equipment required. It's a smart buy for anyone serious about brass prep who wants results without the learning curve or bench sprawl of larger machinery.
| Power | 115V electric |
| Motor Type | Variable speed |
| Cutter | Carbide |
| Case Compatibility | Bottleneck rifle cases (not straight-wall) |
| Included Bushings | 10 bushings for popular bottleneck cartridges |
| Trimming Speed | Approximately 15 cases per minute |
| Adjustment Resolution | .001" increments |
| Centering Method | Shoulder contact via spring-loaded bushings |
The trimmer is designed for bottleneck rifle cartridges and comes with 10 bushings covering the most popular bottleneck calibers. It is not suitable for straight-wall cases. The bushings contact the shoulder of the case to center it, so you should verify that your specific cartridge is among the standard types covered by the included bushings.
No. The Case Trim Xpress has a built-in variable-speed 115V electric motor, so it operates independently. You simply plug it in—no external drive equipment or drill press required.
The trimmer features an adjustment wheel that allows you to set case lengths in .001" increments, giving you the precision needed to match exacting reloading specifications.
The Case Trim Xpress comes with a set of 10 bushings designed to fit most popular bottleneck rifle cartridges. No pilots are needed; the bushings alone handle case centering.
SKU: 115685474 • Width: 5.6in • Height: 5.4in • Depth: 8.8in • Weight: 3.9oz
Availability: In Stock
The Lyman Brass Smith Case Trim Xpress is a dedicated electric case trimmer built for rifle reloaders who demand speed and consistency without the hassle of rigging up a drill press or hunting for a separate motor. Unlike bench-mounted systems that eat up real estate or handheld approaches that demand muscle and patience, this machine handles case trimming at roughly 15 cases per minute with a variable-speed motor and a carbide cutter that stays sharp through thousands of cuts. It's purpose-built for bottleneck rifle cartridges and comes ready to work with a set of 10 bushings that fit the most common calibers.
The Xpress trimmer uses spring-loaded bushings that contact the shoulder of bottleneck cases, centering them against the cutter with no loose pilots to fuss with. That shoulder-contact design means you get repeatable, chatter-free trims every time—critical when you're matching case lengths to .001" tolerance. An adjustment wheel lets you dial in your exact trim length, so switching between different cartridges or matching a tight specification is straightforward. The compact, low-profile housing fits into cramped reload benches without dominating the workspace.
If you're trimming volume or just tired of hand-trimming brass, the Xpress brings consistency and speed to a tedious reloading step. The built-in 115V motor means you plug it in and go—no auxiliary equipment required. It's a smart buy for anyone serious about brass prep who wants results without the learning curve or bench sprawl of larger machinery.
| Power | 115V electric |
| Motor Type | Variable speed |
| Cutter | Carbide |
| Case Compatibility | Bottleneck rifle cases (not straight-wall) |
| Included Bushings | 10 bushings for popular bottleneck cartridges |
| Trimming Speed | Approximately 15 cases per minute |
| Adjustment Resolution | .001" increments |
| Centering Method | Shoulder contact via spring-loaded bushings |
The trimmer is designed for bottleneck rifle cartridges and comes with 10 bushings covering the most popular bottleneck calibers. It is not suitable for straight-wall cases. The bushings contact the shoulder of the case to center it, so you should verify that your specific cartridge is among the standard types covered by the included bushings.
No. The Case Trim Xpress has a built-in variable-speed 115V electric motor, so it operates independently. You simply plug it in—no external drive equipment or drill press required.
The trimmer features an adjustment wheel that allows you to set case lengths in .001" increments, giving you the precision needed to match exacting reloading specifications.
The Case Trim Xpress comes with a set of 10 bushings designed to fit most popular bottleneck rifle cartridges. No pilots are needed; the bushings alone handle case centering.
SKU: 115685474 • Width: 5.6in • Height: 5.4in • Depth: 8.8in • Weight: 3.9oz
