L.E. Wilson167525526
L.E. Wilson S/S Bullet Seater Die W/ Micrometer Adjustment 7Mm Prc$135.52
Availability: In Stock
The L.E. Wilson S/S Bullet Seater Die with micrometer adjustment for 7mm RSAUM gives reloaders the precision control needed to dial in repeatable bullet seating depths. Built from stainless steel and designed for use with an arbor press, this die lets you make fine adjustments in 0.001" increments via the micrometer top—a huge advantage over standard seater dies when you're chasing consistency in a quality reload. Whether you're working up loads at the bench or fine-tuning at the range, the ability to adjust seating depth in tiny, measurable steps means your rounds will chamber and perform the same way every time.
One of the smarter features of an arbor seater design is portability: you can load rounds long, take the die and press to the range to test actual seating depth, then come home and fine-tune without making multiple trips or guessing. That workflow saves time and eliminates the trial-and-error that eats up a reloading session. The stainless construction handles repeated use without corrosion, and the threaded cap design keeps adjustments locked in place once dialed in.
If you're a precision rifle handloader working with 7mm RSAUM brass—whether for hunting, PRS competition, or long-range target work—this die brings a level of accuracy control that separates careful ammo makers from casual loaders. Pair it with an arbor press and your existing 7mm RSAUM dies to add this critical final step to your reloading bench.
| Cartridge | 7mm RSAUM |
| Material | Stainless Steel |
| Adjustment Increment | 0.001" |
| Adjustment Type | Micrometer Top with Threaded Cap |
| Press Type Required | Arbor Press |
Yes. This die is designed as an arbor seater, which means it requires an arbor press for operation. It is not compatible with standard single-stage, turret, or progressive reloading presses.
This die is made specifically for 7mm RSAUM. Do not use it with other 7mm calibers; it will not function correctly and may damage your brass or equipment.
The micrometer adjustment lets you control bullet seating depth in 0.001" increments, ensuring consistent seating depth from round to round. This precision is critical for accuracy and reliable function, especially in precision rifle applications.
Yes. One advantage of the arbor seater design is portability—you can load rounds at your standard seating depth, bring the arbor press and die to the range, and test or adjust seating depth as needed based on real-world feeding and accuracy results. This saves multiple trips to the range during load development.
SKU: 167522867 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 1oz
Availability: In Stock
The L.E. Wilson S/S Bullet Seater Die with micrometer adjustment for 7mm RSAUM gives reloaders the precision control needed to dial in repeatable bullet seating depths. Built from stainless steel and designed for use with an arbor press, this die lets you make fine adjustments in 0.001" increments via the micrometer top—a huge advantage over standard seater dies when you're chasing consistency in a quality reload. Whether you're working up loads at the bench or fine-tuning at the range, the ability to adjust seating depth in tiny, measurable steps means your rounds will chamber and perform the same way every time.
One of the smarter features of an arbor seater design is portability: you can load rounds long, take the die and press to the range to test actual seating depth, then come home and fine-tune without making multiple trips or guessing. That workflow saves time and eliminates the trial-and-error that eats up a reloading session. The stainless construction handles repeated use without corrosion, and the threaded cap design keeps adjustments locked in place once dialed in.
If you're a precision rifle handloader working with 7mm RSAUM brass—whether for hunting, PRS competition, or long-range target work—this die brings a level of accuracy control that separates careful ammo makers from casual loaders. Pair it with an arbor press and your existing 7mm RSAUM dies to add this critical final step to your reloading bench.
| Cartridge | 7mm RSAUM |
| Material | Stainless Steel |
| Adjustment Increment | 0.001" |
| Adjustment Type | Micrometer Top with Threaded Cap |
| Press Type Required | Arbor Press |
Yes. This die is designed as an arbor seater, which means it requires an arbor press for operation. It is not compatible with standard single-stage, turret, or progressive reloading presses.
This die is made specifically for 7mm RSAUM. Do not use it with other 7mm calibers; it will not function correctly and may damage your brass or equipment.
The micrometer adjustment lets you control bullet seating depth in 0.001" increments, ensuring consistent seating depth from round to round. This precision is critical for accuracy and reliable function, especially in precision rifle applications.
Yes. One advantage of the arbor seater design is portability—you can load rounds at your standard seating depth, bring the arbor press and die to the range, and test or adjust seating depth as needed based on real-world feeding and accuracy results. This saves multiple trips to the range during load development.
SKU: 167522867 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 1oz