L.E. Wilson167525526
L.E. Wilson S/S Bullet Seater Die W/ Micrometer Adjustment 7Mm Prc$135.52
Availability: In Stock
The L.E. Wilson S/S Bullet Seater Die with Micrometer Adjustment for 6.5 PRC gives reloaders a precision tool built for consistent, repeatable bullet-seating depths. Built from stainless steel for durability and corrosion resistance, this die features a micrometer-top design that lets you dial in seating depth with 0.001" increments—the level of control serious handloaders need for match-grade ammo. Whether you're working up loads for a precision rifle or fine-tuning competition rounds, the ability to adjust seating depth in tiny, measurable steps means you can chase the ideal jump or jam for your cartridge and rifle combo without guesswork.
One standout advantage of this arbor-style seater: you can load bullets long at home, then bring the die and an arbor press to the range to test different seating depths and see how they perform downrange—eliminating multiple trips back and forth. The threaded cap makes major adjustments straightforward, and the stainless steel construction holds up to repeated use. Paired with a quality arbor press, this die becomes part of a setup that pays dividends in accuracy and consistency, cartridge after cartridge.
If you're serious about 6.5 PRC precision rifle loads or competitive handloading, the L.E. Wilson micrometer seater die is the kind of equipment that separates good ammo from great ammo. The repeatability it offers—combined with the flexibility to test and adjust at the range—makes it a smart long-term investment for any reloader who values consistency.
| Caliber | 6.5 PRC |
| Die Type | Bullet Seater |
| Style | Arbor Seater with Micrometer Top |
| Material | Stainless Steel |
| Adjustment Increment | 0.001" |
| Manufacturer | L.E. Wilson |
Yes. This is an arbor-seater design and must be used with an arbor press, not a standard reloading press.
Yes—that's one of the main advantages. You can load bullets long at home, bring the die and arbor press to the range, and test different seating depths to dial in the best performance for your rifle without extra trips home.
The micrometer top allows you to adjust bullet-seating depth in extremely fine increments of 0.001 inch, giving you precision control over the exact depth at which bullets are seated into your 6.5 PRC cases.
Yes. The die is constructed from stainless steel, which resists corrosion and holds up well to repeated use over time.
SKU: 167522868 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.94oz
Availability: In Stock
The L.E. Wilson S/S Bullet Seater Die with Micrometer Adjustment for 6.5 PRC gives reloaders a precision tool built for consistent, repeatable bullet-seating depths. Built from stainless steel for durability and corrosion resistance, this die features a micrometer-top design that lets you dial in seating depth with 0.001" increments—the level of control serious handloaders need for match-grade ammo. Whether you're working up loads for a precision rifle or fine-tuning competition rounds, the ability to adjust seating depth in tiny, measurable steps means you can chase the ideal jump or jam for your cartridge and rifle combo without guesswork.
One standout advantage of this arbor-style seater: you can load bullets long at home, then bring the die and an arbor press to the range to test different seating depths and see how they perform downrange—eliminating multiple trips back and forth. The threaded cap makes major adjustments straightforward, and the stainless steel construction holds up to repeated use. Paired with a quality arbor press, this die becomes part of a setup that pays dividends in accuracy and consistency, cartridge after cartridge.
If you're serious about 6.5 PRC precision rifle loads or competitive handloading, the L.E. Wilson micrometer seater die is the kind of equipment that separates good ammo from great ammo. The repeatability it offers—combined with the flexibility to test and adjust at the range—makes it a smart long-term investment for any reloader who values consistency.
| Caliber | 6.5 PRC |
| Die Type | Bullet Seater |
| Style | Arbor Seater with Micrometer Top |
| Material | Stainless Steel |
| Adjustment Increment | 0.001" |
| Manufacturer | L.E. Wilson |
Yes. This is an arbor-seater design and must be used with an arbor press, not a standard reloading press.
Yes—that's one of the main advantages. You can load bullets long at home, bring the die and arbor press to the range, and test different seating depths to dial in the best performance for your rifle without extra trips home.
The micrometer top allows you to adjust bullet-seating depth in extremely fine increments of 0.001 inch, giving you precision control over the exact depth at which bullets are seated into your 6.5 PRC cases.
Yes. The die is constructed from stainless steel, which resists corrosion and holds up well to repeated use over time.
SKU: 167522868 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.94oz